DOI QR코드

DOI QR Code

Critical setback distance for a footing resting on slopes under seismic loading

  • Shukla, Rajesh Prasad (Department of Earthquake Engineering, IIT Roorkee) ;
  • Jakka, Ravi S. (Department of Earthquake Engineering, IIT Roorkee)
  • 투고 : 2017.09.18
  • 심사 : 2018.04.23
  • 발행 : 2018.08.30

초록

A footing located on slopes possess relatively lower bearing capacity as compared to the footing located on the level ground. The bearing capacity further reduces under seismic loading. The adverse effect of slope inclination and seismic loading on bearing capacity can be minimized by proving sufficient setback distance. Though few earlier studies considered setback distance in their analysis, the range of considered setback distance was very narrow. No study has explored the critical setback distance. An attempt has been made in the present study to comprehensively investigate the effect of setback distance on footing under seismic loading conditions. The pseudo-static method has been incorporated to study the influence of seismic loading. The rate of decrease in seismic bearing capacity with slope inclination become more evident with the increase in embedment depth of footing and angle of shearing resistance of soil. The increase in bearing capacity with setback distance relative to level ground reduces with slope inclination, soil density, embedment depth of footing and seismic acceleration. The critical value of setback distance is found to increase with slope inclination, embedment depth of footing and density of soil. The critical setback distance in seismic case is found to be more than those observed in the static case. The failure mechanisms of footing under seismic loading is presented in detail. The statistical analysis was also performed to develop three equations to predict the critical setback distance, seismic bearing capacity factor ($N_{{\gamma}qs}$) and change in seismic bearing capacity (BCR) with slope geometry, footing depth and seismic loading.

키워드

참고문헌

  1. Acharyya, R. and Dey, A. (2017), "Finite element investigation of the bearing capacity of square footings resting on sloping ground", INAE Lett., 2(3), 97-105. https://doi.org/10.1007/s41403-017-0028-6
  2. Altalhea, E.B., Taha, M.R. and Abdrabbob F.M. (2015), "Behavior of strip footing on reinforced sand slope", J. Civil Eng. Manage., 21(3), 376-383. https://doi.org/10.3846/13923730.2014.890646
  3. Arvin, M.R., Askari, F. and Farzaneh, O. (2012), "Static and dynamic bearing capacity of strip footings, under variable repeated loading", Turkish J. Eng. Env. Sci., 36(1), 19-31.
  4. Askari, F. and Farzaneh, O. (2003), "Upper-bound solution for seismic bearing capacity of shallow foundations near slopes", Geotechnique, 53(8), 697-702. https://doi.org/10.1680/geot.2003.53.8.697
  5. Ausilio, E. (2014), "Seismic bearing capacity of strip footings located close to the crest of geosynthetic reinforced soil structures", Geotech. Geol. Eng., 32(4), 885-899. https://doi.org/10.1007/s10706-014-9765-4
  6. Bowles, J.E. (1988), Foundation Engineering and Design, 5th Edition, McGraw-Hill, Inc.
  7. Casablanca, O., Cascone, E. and Biondi, G. (2016), "The static and seismic bearing capacity factor $N_{\gamma}$ for footings adjacent to slopes", Procedia Eng., 158, 410-415. https://doi.org/10.1016/j.proeng.2016.08.464
  8. Castelli, F. and Motta, E. (2010), "Bearing capacity of strip footings near slopes", Geotech. Geol. Eng., 28(2), 187-198. https://doi.org/10.1007/s10706-009-9277-9
  9. Chakraborty, D. and Kumar, J. (2014), "Seismic bearing capacity of shallow embedded foundations on a sloping ground surface", Int. J. Geomech., 15(1), 04014035. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000403
  10. Chakraborty, D. and Mahesh, Y. (2015), "Seismic bearing capacity factors for strip footings on an embankment by using lower-bound limit analysis", Int. J. Geomech., 16(3), 06015008.
  11. Choudhury, D. and Subba Rao, K.S. (2006), "Seismic bearing capacity of shallow strip footings embedded in slope", Int. J. Geomech., 6(3), 176-184. https://doi.org/10.1061/(ASCE)1532-3641(2006)6:3(176)
  12. Cure, E., Sadoglu, E., Turker, E. and Uzuner, B.A. (2014), "Decrease trends of ultimate loads of eccentrically loaded model strip footings close to a slope", Geomech. Geoeng., 6(5), 469-485.
  13. El Sawwaf, M. (2010), "Experimental and numerical study of strip footing supported on stabilized sand slope", Geotech. Geol. Eng., 28(4), 311-323. https://doi.org/10.1007/s10706-009-9293-9
  14. El Sawwaf, M.A. (2007), "Behavior of strip footing on geogridreinforced sand over a soft clay slope", Geotext. Geomembr., 25(1), 50-60. https://doi.org/10.1016/j.geotexmem.2006.06.001
  15. Georgiadis K. (2010), "Undrained bearing capacity of strip footings on slopes", J. Geotech. Geoenviron. Eng., 136(5), 677-685. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000269
  16. Ghazavi, M. and Mahali, A.S. (2013), "Determination of seismic bearing capacity of shallow strip footings on slopes", The 8th Symposium on Advances in Science and Technology, Mashhad, Iran.
  17. Giroud, J.P. (1971), "Force portante d'une fondation sur une pente", A.I.T.B.T.P., No. 283 - 284, juillet - aout, Serie: theorie et methode de calcul, No. 142, Paris, France.
  18. Graham, J., Andrews, M. and Shields, D.H. (1988), "Stress characteristics for shallow footings in cohesionless slopes", Can. Geotech. J., 25(2), 238-249. https://doi.org/10.1139/t88-028
  19. Hansen, J.B. (1970), "A revised and extended formula for bearing capacity", Bulletin 28, Danish Geotechnical Institute, Copenhagen.
  20. Huang, C.C. (2009), "Effects of horizontal and vertical seismic loads on the bearing capacity of a surface footing adjacent to a slope", Soil. Found., 49(2), 249-258. https://doi.org/10.3208/sandf.49.249
  21. Huang, C.C. and Kang, W.W. (2008), "Seismic bearing capacity of a rigid footing adjacent to a cohesionless slope", Soil. Found., 48(5), 641-651. https://doi.org/10.3208/sandf.48.641
  22. Huang, C.C. and Kang, W.W. (2008), "The effects of a setback on the bearing capacity of A surface footing near a slope", J. Geo Eng., 3(1), 25-32.
  23. IRC (2015), "International residential code for one- and two-family dwellings", International Code Council, Country Club Hills, IL.
  24. Jahanandish, M. and Keshavarz, A. (2005), "Seismic bearing capacity of foundations on reinforced soil slopes", Geotext. Geomembr., 23(1), 1-25. https://doi.org/10.1016/j.geotexmem.2004.09.001
  25. Keawsawasvong, S. and Ukritchon, B. (2016), "Finite element limit analysis of pullout capacity of planar caissons in clay", Comput. Geotech., 75(1), 12-17. https://doi.org/10.1016/j.compgeo.2016.01.015
  26. Keskin, M.S. and Laman, M. (2012), "Model studies of bearing capacity of strip footing on sand slope", KSCE J. Civil Eng., 17(4):699-711. https://doi.org/10.1007/s12205-013-0406-x
  27. Krabbenhoft, K., Lyamin, A. and Krabbenhoft, J. (2015), "Optum computational engineering", www.optumce.com.
  28. Kumar, J. and Chakraborty, D. (2013), "Seismic bearing capacity of foundations on cohesionless slopes", J. Geotech. Geoenviron. Eng., 139(11), 1986-1993. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000909
  29. Kumar, J. and Ghosh, P. (2006), "Seismic bearing capacity for embedded footings on sloping ground", Geotechnique, 56(2), 133-140. https://doi.org/10.1680/geot.2006.56.2.133
  30. Kumar, J. and Mohan Rao, V.B.K. (2003), "Seismic bearing capacity of foundations on slopes", Geotechnique, 53(3) 347-361. https://doi.org/10.1680/geot.2003.53.3.347
  31. Lee, K.M. and Manjunath, V.R. (2000), "Experimental and numerical studies of geosynthetic-reinforced sand slopes loaded with a footing", Can. Geotech. J., 37(4), 828-842. https://doi.org/10.1139/t00-016
  32. Lyamin, A.V., Sloan, S.W., Krabbenhoft, K. and Hjiaj, M. (2005), "Lower bound limit analysis with adaptive remeshing", Int. J. Numer. Meth. Eng., 63(14), 1961-1974. https://doi.org/10.1002/nme.1352
  33. Meyerhof, G.G. (1957), "The ultimate bearing capacity of foundation on slopes", 4th Int. Conf. on Soil Mech. Found. Eng., 3, 384-386.
  34. Meyerhof, G.G. (1965), "Shallow foundations". J. Soil Mech. Found. Div., ASCE, 91(2), 21-31.
  35. Mizuno, T., Takumitsu, Y. and Kavakami, H. (1960), "On the bearing capacity of a slope of cohesionless soil", Soil. Found., 1(20), 30-37. https://doi.org/10.3208/sandf1960.1.2_30
  36. Naeini, S.A., Rabe, B.K. and Mahmoodi, E. (2012), "Bearing capacity and settlement of strip footing on geosynthetic reinforced clayey slopes", J. Centr. South Univ., 19(4), 1116-1124. https://doi.org/10.1007/s11771-012-1117-z
  37. Narita, K. and Yamaguchi, H. (1990), "Bearing capacity analysis of foundations on slopes by use of log-spiral sliding surfaces". Soil. Found., 30(3), 144-152. https://doi.org/10.3208/sandf1972.30.3_144
  38. Nouri, M. (2014), "Interaction domain of shallow foundations on the top of a slope", Master Dissertation, Dept. of Civil, Environmental and Land Management Engineering, Polytechnic University of Milan. Italy.
  39. Optum G2 [Computer software], OptumCE, Copenhagen, Denmark.
  40. Peck, R.B., Hanson, W.E. and Thornburn, T.H, (1974), Foundation Engineering, Wiley, New York.
  41. Rostami, V. and Ghazavi, M. (2015), "Analytical solution for calculation of bearing capacity of shallow foundations on geogrid-reinforced sand slope", IJST-T. Civil Eng., 39(C1), 167-182.
  42. Saran, S., Sud, V. and Handa, S. (1989), "Bearing capacity of footings adjacent to slopes", J. Geotech. Eng. ASCE, 115(4), 553-573. https://doi.org/10.1061/(ASCE)0733-9410(1989)115:4(553)
  43. Sarma, S.K. and Chen, Y.C. (F1995), "Seismic bearing capacity of shallow strip footings near sloping ground", The 5th SECED Conference, Chester, UK, October.
  44. Sarma, S.K. and Iossifelis, I.S. (1990), "Seismic bearing capacity factors of shallow strip footings", Geotechnique, 40(2), 265-273. https://doi.org/10.1680/geot.1990.40.2.265
  45. Sawada, T., Nomachi, S.G. and Chen, W.F. (1994), "Seismic bearing capacity of a mounded foundation near a down-hill slope by pseudo-static analysis", Soil. Found., 34(1), 11-17. https://doi.org/10.3208/sandf1972.34.11
  46. Shields, D., Chandler, N. and Garnier, J. (1990), "Bearing capacity of foundations in slopes", J. Geotech. Eng., ASCE, 116(3), 528-537. https://doi.org/10.1061/(ASCE)0733-9410(1990)116:3(528)
  47. Shukla, R.P. and Jakka, R.S. (2017), "Critical setback distance for a footing resting on slopes", Acta Geotech. Slovenica, 14(2), 19-31.
  48. Terzaghi, K. (1943), Theoretical Soil Mechanics, Wiley, New York.
  49. Uniform Building Code (UBC) (1997), Uniform Building Code, International Conference of Building Officials, Whittier, California, USA.
  50. Varzaghani, I.M. and Ghanbari, A. (2014), "A new analytical model to determine dynamic displacement of foundations adjacent to slope", Geomech. Geoeng., 6(6), 561-575.
  51. Vesic, A.S. (1973), "Analysis of ultimate loads of shallow foundations", J. Soil Mech. Found. Div., ASCE, 99(1), 45-73
  52. Yamamoto, K. (2010), "Seismic bearing capacity of shallow foundations near slopes using the upper-bound method", Int. J. Geomech., 4(2), 255-267.