Transactions of the Korean hydrogen and new energy society (한국수소및신에너지학회논문집)

The Korean Hydrogen and New Energy Society (한국수소및신에너지학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Behavior of Surface Oxidation with Steel Type

강판 종별 표면 산화 거동에 관한 연구

  • KIM, SEULGI (Department of Aerospace Engineering, Sunchon National University Grad.) ;
  • LEE, KEEMAN (School of Mechanical and Aerospace Engineering, Sunchon National University)
  • 김슬기 (순천대학교대학원 우주항공공학과) ;
  • 이기만 (순천대학교 기계.우주항공공학부)
  • Received : 2018.07.03
  • Accepted : 2018.08.31
  • Published : 2018.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

An experimental study was conducted to investigate behavior of surface oxidation with steel type. The excess entalphy combustion in porous media system was applied to implement the direct radiation heating system. The surface oxidation thickness (SOT) in fuel-lean condition was thicker than the SOT in fuel-rich. Also, the SOT was increased by increasing residence time. Detailed explanations were given by SEM and EDS analysis.

Keywords

References

  1. H. S. Park and K. J. Riu, "Effect of Combustion Characteristics of the Burners for Non-Oxidizin Direct Fired Furnaces on the Oxidation of the Surface of Steel Plate", Mechanical Eng. Korea Society, Vol. 23, 1999, pp. 330-341.
  2. T. Takno and K. Sato, "An Excess Entahlpy Flame Theory", Combust. Sci. Tech., Vol. 20, 1979, pp. 73-84. https://doi.org/10.1080/00102207908946898
  3. J. R. Howell, M. J. Hall, and J. L. Ellzey, "Combustion of Hydrocarbon Fuels within Porous Inert Media ", Prog. Energy Combust. Sci, Vol. 22, 1996, pp. 121-145. https://doi.org/10.1016/0360-1285(96)00001-9
  4. M. Katsuki, Y. Mizutani, T. Ogawa, and K. Hatta, "The Oxidation Behavior of Metal Surface in a Flame", JSME Int. Jr., Series I, Vol. 35, No. 1, 1990, pp. 110-115.
  5. D. Huin, P. Plauder, and J. B. Leblond, "Oxidation of Metals", JSME Int. Jr., Series II, 2005, pp. 132-133
  6. N. Birks, G. H. Meier, and F. S. Pettit, "Introduction to the High Temperature Oxidation of Metals", Combust. Flame, Vol. 157, 2002, pp. 101-110.
  7. Y. Suzuki, T. Yamashita, and Y. Sugimoto, "Thermodynamic Analysis of Selective Oxidation Behavior of Si and Mn-added Steel during Recrystallization Annealing", ISIJ Int., Vol. 49, No. 4, 2009, pp. 564-573. https://doi.org/10.2355/isijinternational.49.564
  8. F. M. Pereira, A. A. M. Oliveira, and F. F. Fachini, "Maximum Superadibatic Temperature for Stabilized Flames within Porous Inert Media", Combust. Flame, Vol. 158, 2011, pp. 2283-2288. https://doi.org/10.1016/j.combustflame.2011.04.001
  9. J. B. Lee, "Effect of Alloying Elements and Annealing Condition on Surface Oxidation Behavior during Annealing of 25 mass % Mn Steel Sheet", PhD Thesis, Kyungpook National University, 2008.
  10. S. G. Kim, K. J. Kang, and K. M. Lee, "A Study on Behavior of Steel Surface Oxidation with Characteristics of the Combustion", Trans. of the Korean Hydrogen and New Energy Society, Vol. 28, No. 4, 2017, pp. 392-400. https://doi.org/10.7316/KHNES.2017.28.4.392
  11. M. S. Kim, "Study on Surface Oxidation and Galvanizability of Steel", PhD Thesis, Sunchon National University, 2013.