DOI QR코드

DOI QR Code

Optimization of SWCNT-Coated Fabric Sensors for Human Joint Motion Sensing

  • 투고 : 2016.03.23
  • 심사 : 2018.03.28
  • 발행 : 2018.09.01

초록

This study explored the feasibility of utilizing an SWCNT-coated fabric sensor for the development of a wearable motion sensing device. The extent of variation in electric resistance of the sensor material was evaluated by varying the fiber composition of the SWCNT-coated base fabrics, attachment methods, number of layers, and sensor width and length. 32 sensors were fabricated by employing different combinations of these variables. Using a custom-built experimental jig, the amount of voltage change in a fabric sensor as a function of the length was measured as the fabric sensors underwent loading-unloading test with induced strains of 30 %, 40 %, and 50 % at a frequency of 0.5 Hz. First-step analysis revealed the following: characteristics of the strain-voltage curves of the fabric sensors confirmed that 14 out of 32 sensors were evaluated as more suitable for measuring human joint movement, as they yield stable resistance values under tension-release conditions; furthermore, significantly stable resistance values were observed at each level of strain. Secondly, we analyzed the averaged maximum, minimum, and standard deviations at various strain levels. From this analysis, it was determined that the two-layer sensor structure and welding attachment method contributed to the improvement of sensing accuracy.

키워드

참고문헌

  1. Guido Gioberto and Lucy E. Dunne, "Garment-Integrated Bend Sensor," Electronics, vol. 3, pp. 564-581, September 2014. https://doi.org/10.3390/electronics3040564
  2. Gilsoo Cho, Keesam Jeong, Min Joo Paik, Youngeun Kwun, Moonsoo Sung, "Performance Evaluation of Textile-Based Electrodes and Motion Sensors for Smart Clothing," IEEE Sensors Journal, vol. 11, no. 12, pp.3183-3193, December 2011. https://doi.org/10.1109/JSEN.2011.2167508
  3. Sun Ok Gi, Young Jae Lee, Hye Ran Koo, Seonah Khang, Kyung-Nam Kim, Seung-Jin Kang, Joo Hyeon Lee and Jeong-Whan Lee, "Application of a Textile-based Inductive Sensor for the Vital Sign Monitoring," Journal of Electrical Engineering & Technology, vol. 10, no. 1, pp. 364-371, October 2015. https://doi.org/10.5370/JEET.2015.10.1.364
  4. Hye Ran Koo, Young-Jae Lee, Sunok Gi, Seonah Khang, Joo Hyeon Lee, Jae-Ho Lee, Min-Gyu Lim, Hee-Jung Park, Jeong-Whan Lee, "The Effect of Textile-Based Inductive Coil Sensor Positions for Heart Rate Monitoring," Journal of Medical Systems, vol. 38, no. 2, February 2014.
  5. PolyPower electrostatic film measures athletic movements, harvests energy, C.C. Weiss, February 28, 2013, Retrieved from http://www.gizmag.com/danfoss-polypower-sport-sensors/26324/
  6. Lucy E. Dunne, Pauline Walsh, Sonja Hermann, Barry Smyth and Brian Caulfield, "Wearable Monitoring of Seated Spinal Posture," IEEE Trans. Biomedical Circuits and Systems, vol. 2, no. 2, pp. 97-105. June. 2008. https://doi.org/10.1109/TBCAS.2008.927246
  7. Lorenzo, T., "Wearable systems for movement recording in care support," Wearable Technologies Conference, Munich, February 2013.
  8. Bjoern Eskofier, "Wearable computing systems for recreational and elite sports," Wearable Technologies Conference, Munich, February 2013.
  9. Christian Hofmann, "Wearable sensors and wireless data transmission," Wearable Technologies Conference, Munich, February 2012.
  10. Daniel Roetenberg, Henk Luinge and Per Slycke, "Xsens MVN: Full 6DOF Human Motion Tracking Using Miniature Inertial Sensors," XSENS TECHNOLOGIES - version April 3, 2013.
  11. Paul L. McEuen, Michael Fuhrer and Hongkun Park, "Single-Walled Carbon Nanotube Electronics," IEEE Trans. Nanotechnolgy, 2002.