DOI QR코드

DOI QR Code

Microstructural Characteristics of Alkali-Activated Cements Incorporating Fly Ash and Slag

플라이애시와 슬래그 혼합 알칼리 활성 시멘트의 미세구조 특성

  • 장정국 (인천대학교 도시과학대학 도시건축학부)
  • Received : 2018.06.19
  • Accepted : 2018.06.30
  • Published : 2018.06.30

Abstract

This study investigates microstructural characteristics of alkali-activated cements incorporating slag and fly ash. Samples were prepared with four fly ash:slag ratios, i.e., 100:0, 90:10, 70:30 and 50:50, and they were synthesized by using an alkali activator. Microstructural characteristics of the alkali-activated cements were determined by XRD, TGA, SEM, N2 gas adsorption/desorption methods, and compressive strength test. The results showed that properties of alkali-activated fly ash/slag were significantly affected by slag contents. Alkali-activated fly ash/slag with slag content of 30-50% showed higher compressive strength than ordinary Portland cement paste. An increase in slag content resulted in a denser microstructure, which composed of amorphous gel, therefore contributed to strength development of the material.

Keywords

References

  1. Davidovits, J. (2015), "False values on $CO_2$ emission for geopolymer cement/concrete published in scientific papers", Technical Paper #24, Geopolymer Institute Library.
  2. Jang, J.G., Lee, N.K. and Lee, H.K. (2014), "Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers", Construction and Building Materials, Vol. 50, pp. 169-176. https://doi.org/10.1016/j.conbuildmat.2013.09.048
  3. Jang, J.G., Kim, H.J., Park, S.M. and Lee, H.K. (2015), "The influence of sodium hydrogen carbonate on the hydration of cement", Construction and Building Materials, Vol. 94, pp. 746-749. https://doi.org/10.1016/j.conbuildmat.2015.07.121
  4. Jang, J.G. and Lee, H.K. (2016), "Effect of fly ash characteristics on delayed high-strength development of geopolymers", Construction and Building Materials, Vol. 102, pp. 260-269. https://doi.org/10.1016/j.conbuildmat.2015.10.172
  5. Jang, J.G., Park, S.M. and Lee, H.K. (2017), "Alkali-activation of fly ash: Performances and potential industrial applications", Chapter 5 in: Fly ash: Properties, Analysis and Performance, pp. 99-121, Nova Science Publishers.
  6. Mehta, K.P. (2001), "Reducing the environmental impact of concrete", Concrete International, Vol. 23, pp. 61-66.
  7. Provis, J.L., Palomo, A. and Shi, C. (2015), "Advances in understanding alkali-activated materials", Cement and Concrete Research, Vol. 78, pp. 110-125. https://doi.org/10.1016/j.cemconres.2015.04.013
  8. Provis, J.L. (2017), "Alkali-activated materials", Cement and Concrete Research, in press, doi: 10.1016/j.cemconres.2017.02.009
  9. Puertas, F., Martinez-Ramirez, S., Alonso, S. and Vazquez, T. (2000), "Alkali-activated fly ash/slag cements: Strength behaviour and hydration products", Cement and Concrete Research, Vol. 30, pp. 1625-1632. https://doi.org/10.1016/S0008-8846(00)00298-2
  10. Yip, C.K., Lukey, G.C. and Van Deventer, J.S.J. (2005), "The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation", Cement and Concrete Research, Vol. 35, pp. 1688-1697. https://doi.org/10.1016/j.cemconres.2004.10.042