DOI QR코드

DOI QR Code

Effect of accelerators with waste material on the properties of cement paste and mortar

  • Devi, Kiran (Department of Civil Engineering, National Institute of Technology) ;
  • Saini, Babita (Department of Civil Engineering, National Institute of Technology) ;
  • Aggarwal, Paratibha (Department of Civil Engineering, National Institute of Technology)
  • Received : 2017.07.16
  • Accepted : 2018.05.28
  • Published : 2018.08.25

Abstract

Accelerators are used to speed up the construction by accelerating the setting time which helps in early removal of formwork thus leading to faster construction rate. Admixtures are used in mortar and concrete during or after mixing to improve certain properties of material which cannot be achieved in conventional cement mortar and concrete. The various industrial by products make nuisance and are hazardous to ecosystem as well. These wastes can be used in the construction industries to reduce the consumption of cement/aggregates, cost; and save the energy and environment by utilising waste and eliminate their disposal problem as well. The effect of calcium nitrate and triethanolamine (TEA) as accelerators and marble powder (MP) as waste material on the various properties of cement paste and mortar has been studied in the present work. The replacement ratio of MP was 0-10% @ 2.5% by weight of cement. The addition of calcium nitrate was 0% and 1%; and variation of addition of TEA was 0-0.1@ 0.025% and 0.1-1.0@ 0.1% by weight of cement. On the basis of setting time, some mix proportions were selected and further investigated. Setting time and soundness of cement paste; compressive strength and microstructure of mortar mix of selected mix proportions were studied experimentally at 3, 7 and 28 days aging. Results showed that use of MP, calcium nitrate, TEA and their combination reduced setting time of cement paste for all the mixes. Addition of calcium nitrate increased the compressive strength at all curing ages while MP and TEA decreased the compressive strength. The mechanism of additives was discussed through scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS) analysis of the specimens.

Keywords

References

  1. Ashish, D.K., Verma, S.K., Kumar, R. and Sharma, N. (2016), "Properties of concrete incorporating sand and cement with waste marble powder", Adv. Concrete Constr., 4(2), 145-160. https://doi.org/10.12989/acc.2016.4.2.145
  2. Belaidi, A.S.E., Azzouz, L., Kadri, E. and Kenai, S. (2012), "Effect of natural pozzolana and marble powder on the properties of self-compacting concrete", Constr. Build. Mater., 31, 251-257. https://doi.org/10.1016/j.conbuildmat.2011.12.109
  3. Gambhir, M.L. (2013), Concrete Technology, McGraw-Hill Company, New Delhi, India.
  4. Han, J., Wang, K., Shi, J. and Wang, Y. (2015), "Mechanism of triethanolamine on Portland cement hydration process and microstructure characteristics", Constr. Build. Mater., 93, 457-462. https://doi.org/10.1016/j.conbuildmat.2015.06.018
  5. Karra, R.C., Raghunandan, M.E. and Manjunath, B. (2016), "Partial replacement of fine aggregates with laterite in GGBS-blended-concrete", Adv. Concrete Constr., 4(3), 221-230. https://doi.org/10.12989/acc.2016.4.3.221
  6. Kicaite, A., Pundiene, I. and Skripkiunas, G. (2017), "The influence of calcium nitrate on setting and hardening rate of Portland cement concrete at different temperatures", IOP Conf. Ser.: Mater. Sci. Eng., 251(1), 012017. https://doi.org/10.1088/1757-899X/251/1/012017
  7. Mohammed, M.K., Dawson, A.R. and Thom, N.H. (2013), "Production, microstructure and hydration of sustainable selfcompacting concrete with different types of filler", Constr. Build. Mater., 49, 84-92. https://doi.org/10.1016/j.conbuildmat.2013.07.107
  8. Myrdal, R. (2007), "Accelerating admixtures of concrete State of the art", SINTEF Building and Infrastructure, Norway.
  9. Naville, A.M. and Brooks, J.J. (1997), Concrete Technology, 2nd Edition, Longman Publishing Limited, England.
  10. Ramachandran, V.S. (1976), "Hydration of cement - Role of Triethanolamine", Cement Concrete Res., 6, 623-632. https://doi.org/10.1016/0008-8846(76)90026-0
  11. Rana, A., Kalla, P. and Csetenyi, L.J. (2015), "Sustainable use of marble slurry in concrete", J. Clean. Product., 94, 304-311. https://doi.org/10.1016/j.jclepro.2015.01.053
  12. Saridemir, M. (2017), "Modelling the flexural strength of mortars containing different mineral admixtures via GEP and RA", Comput. Concrete, 19(6), 717-724. https://doi.org/10.12989/cac.2017.19.6.717
  13. Tang, C.W. (2010), "Hydration properties of cement pastes containing high-volume mineral admixtures", Comput. Concrete, 7(1), 17-38. https://doi.org/10.12989/cac.2010.7.1.017
  14. Topcu, I.B., Bilir, T. and Uygunoglu, T. (2009), "Effect of waste marble dust content as filler on properties of self-compacting concrete", Constr. Build. Mater., 23(5), 1947-1953. https://doi.org/10.1016/j.conbuildmat.2008.09.007
  15. Vardhan, K., Goyal, S., Siddique, R. and Singh, M. (2015), "Mechanical properties and microstructural analysis of cement mortar incorporating marble powder as partial replacement of cement", Constr. Build. Mater., 96, 615-621. https://doi.org/10.1016/j.conbuildmat.2015.08.071
  16. Zahrai, S.M., Mortezagholi, M.H. and Najaf, E. (2016), "Using AP2RC & P1RB micro-silica gels to improve concrete strength and study of resulting contamination", Adv. Concrete Constr., 4(3), 195-206. https://doi.org/10.12989/acc.2016.4.3.195
  17. Zhao, J., Wang, D., Wang, X. and Liao, S. (2015), "Characteristics and mechanism of modified triethanolamine as cement grinding aids", J. Wuhan Univ. Technol.-Mater. Sci. Ed., 30(1), 134-141. https://doi.org/10.1007/s11595-015-1114-9