DOI QR코드

DOI QR Code

Structural Performance Evaluation on the Slab with the SFRC and Steel Deck-plate

데크플레이트를 사용한 강섬유보강콘크리트 슬래브의 구조성능 평가

  • Received : 2018.04.11
  • Accepted : 2018.07.16
  • Published : 2018.07.30

Abstract

Steel fiber reinforced concrete can improve the resistance to cracking by adding steel fibers when mixing concrete. It can reduce the temperature and shrinkage cracks, and its flexural performance can be improved by increasing the effective moment of inertia. In this study, the deck-plate was used to replace the concrete form and reinforcing bars, and the steel fiber reinforced concrete was used to control the shrinkage and temperature cracks, and improve the flexural performance of the slab. Total 9 slab specimens were tested for analyzing the structural performance and serviceability. As a results, flexural capacity of the slab with deck-plate was evaluated to be superior to that of the normal reinforced concrete slab specimens with the same tensile reinforcement. The steel fiber reinforced concrete was found to have about 8% flexural capacity increase depending on the steel fiber content $15.7kg/m^3$. Also, in terms of flexural stiffness, the specimens using steel fiber reinforced concrete for the same parameters were evaluated to have a stiffness increase of about 30% compared with the case of using ordinary concrete. Especially, it was found that the stiffness of the test results was significantly higher than the analytical result because the increase of the tensile strength of the steel fiber reinforced concrete is not reflected in the current structural code.

Keywords

Acknowledgement

Supported by : 한국연구재단

References

  1. Architectural Institute of Korea (2007). A study on the design of steel fiber reinforced concrete slabs on grade. AIK, Korea.
  2. Architectural Institute of Korea (2016). Korean Building Code, AIK, Chapter 5.
  3. Hong, G. (2014). Structural performance of steel fiber reinforced concrete slab with the steel deck-plate, Journal of the Architectural Institute of Korea, Structure Section, 30(7), 13-20.
  4. Hwang, H., Hong, G., Park, H., Kim, Y., & Kim J. (2010). Effects of shore stiffness and concrete cracking on slab construction load 2: Measurements and comparisons. Journal of the Korea Concrete Institute, KCI, 22(1), 51-58. https://doi.org/10.4334/JKCI.2010.22.1.051
  5. Park, H., Lee, C., Hong, G., & Hwang, H. (2014). Report of Development of slab system using PosAmo-F and deck-plate. Korea Concrete Institute, Part 1, 50-82.
  6. Yang, K., & Oh, S. (2008). Effect of Volume Fraction and Length of Fiber on the Mechanical Properties of Fiber Reinforced Concrete, Journal of The Korean Institute of Building Construction, The Korea Institute of Building Construction, 8(1), 43-48.