DOI QR코드

DOI QR Code

Effects of silica fume, superplasticizer dosage and type of superplasticizer on the properties of normal and self-compacting concrete

  • Mazloom, Moosa (Department of Civil Engineering, Shahid Rajaee Teacher Training University) ;
  • Soltani, Abolfazl (Department of Civil Engineering, Shahid Rajaee Teacher Training University) ;
  • Karamloo, Mohammad (Department of Civil Engineering, Shahid Rajaee Teacher Training University) ;
  • Hassanloo, Ahmad (Department of Civil Engineering, Shahid Rajaee Teacher Training University) ;
  • Ranjbar, Asadollah (Department of Civil Engineering, Shahid Rajaee Teacher Training University)
  • 투고 : 2018.06.12
  • 심사 : 2018.08.08
  • 발행 : 2018.03.25

초록

In the present study, a special attention has been paid to the effects regarding the use of different superplasticizers in different dosages. To do so, 36 mixes of normal and self-compacting concrete with two water/binder ratios of 0.35 and 0.45, four different types of superplasticizer including melamine-formaldehyde, naphthalene-formaldehyde, carboxylic-ether and poly-carboxylate, four different superplasticizer/cement ratios of 0.4%, 0.8%, 1.2% and 1.6% and two silica fume/cement ratios of 0% and 10% have been cast. Moreover, the initial and final setting time of the pastes have been tested. For self-compacting mixes, flow time, slump flow, V-funnel, J-ring and L-box tests have been carried out as well as testing the compressive strength and rupture modulus. For normal concrete mixes,slump test has been conducted to assess the workability of the mix and then for each mix, the compressive strength and rupture modulus have been determined. The results indicate that in addition to the important role of superplasticizer type and dosage on fresh state properties of concrete, these parameters as well as the use of silica fume could affect the hardened state properties of the mixes. For instance, the mixes whose superplasticizer were poly-carboxylic-ether based showed better compressive and tensile strength than other mixes. Besides, the air contents showed robust dependency to the type of the superplasticizer. However, the use of silica fume decreased the air contents of the mixes.

키워드

참고문헌

  1. Akhlaghi, O., Aytas, T., Tatli, B., Sezer, D., Hodaei, A., Favier, A., Scrivener, K., Menceloglu, Y.Z. and Akbulut, O. (2017), "Modified poly(carboxylate ether)-based superplasticizer for enhanced flowability of calcined clay-limestone-gypsum blended Portland cement", Cem. Concr. Res., 101, 114-122. https://doi.org/10.1016/j.cemconres.2017.08.028
  2. Antoni, Halim, J.G., Kusuma, O.C. and Hardjito, D. (2017), "Optimizing Polycarboxylate Based Superplasticizer Dosage with Different Cement Type", Procedia Eng., 171, 752-759. https://doi.org/10.1016/j.proeng.2017.01.442
  3. ASTM C494 (2001), Standard Specification for Chemical Admixtures for Concrete, American Society for Testing Materials; PA, U.S.A.
  4. Baldino, N., Gabriele, D., Lupi, F.R., Seta, L. and Zinno, R. (2014), "Rheological behaviour of fresh cement pastes: Influence of synthetic zeolites, limestone and silica fume", Cem. Concr. Res., 63, 38-45. https://doi.org/10.1016/j.cemconres.2014.04.009
  5. Bani Ardalan, R., Joshaghani, A. and Hooton, R.D. (2017), "Workability retention and compressive strength of self-compacting concrete incorporating pumice powder and silica fume", Constr. Build. Mater., 134, 116-122. https://doi.org/10.1016/j.conbuildmat.2016.12.090
  6. Bazant, Z.P. and Li, Z. (1995), "Modulus of rupture: Size effect due to fracture initiation in boundary layer", J. Struct. Eng., 121(4), 739-746. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:4(739)
  7. Beygi, M.H.A., Kazemi, M.T., Nikbin, I.M., Vaseghi Amiri, J., Rabbanifar, S. and Rahmani, E. (2014), "The influence of coarse aggregate size and volume on the fracture behavior and brittleness of self-compacting concrete", Cem. Concr. Res., 66, 75-90. https://doi.org/10.1016/j.cemconres.2014.06.008
  8. Brooks, J.J., Megat Johari, M.A. and Mazloom, M. (2000), "Effect of admixtures on the setting times of high-strength concrete", Cem. Concr. Compos., 22(4), 293-301. https://doi.org/10.1016/S0958-9465(00)00025-1
  9. BS EN 12390-4:2000 (2000), Testing Hardened Concrete, Method of Determination of Compressive Strength of Concrete Cubes, British Standards Institution; London, United Kingdom.
  10. EFNARC (2002), Specification and Guidelines for Self-Compacting Concrete, European Federation of National Associations Representing, Norfolk, United Kingdom.
  11. Felekoglu, B. and Sarikahya, H. (2008), "Effect of chemical structure of polycarboxylate-based superplasticizers on workability retention of self-compacting concrete", Constr. Build. Mater., 22(9), 1972-1980. https://doi.org/10.1016/j.conbuildmat.2007.07.005
  12. Feng, W., Xu, J., Chen, P., Jiang, L., Song, Y. and Cao, Y. (2018), "Influence of polycarboxylate superplasticizer on chloride binding in cement paste", Constr. Build. Mater., 158, 847-854. https://doi.org/10.1016/j.conbuildmat.2017.10.086
  13. Ghasemi, M., Ghasemi, M.R. and Mousavi, S.R. (2018), "Investigating the effects of maximum aggregate size on self-compacting steel fiber reinforced concrete fracture parameters", Constr. Build. Mater., 162, 674-682. https://doi.org/10.1016/j.conbuildmat.2017.11.141
  14. Huang, H., Qian, C., Zhao, F., Qu, J., Guo, J. and Danzinger, M. (2016), "Improvement on microstructure of concrete by polycarboxylate superplasticizer (PCE) and its influence on durability of concrete", Constr. Build. Mater., 110, 293-299. https://doi.org/10.1016/j.conbuildmat.2016.02.041
  15. Kanema, J.M., Eid, J. and Taibi, S. (2016), "Shrinkage of earth concrete amended with recycled aggregates and superplasticizer: Impact on mechanical properties and cracks", Mater. Des., 109, 378-389. https://doi.org/10.1016/j.matdes.2016.07.025
  16. Karamloo, M. and Mazloom, M. (2018), "An efficient algorithm for scaling problem of notched beam specimens with various notch to depth ratios", Comput. Concrete, 22(1), 39-51. https://doi.org/10.12989/CAC.2018.22.1.039
  17. Karamloo, M., Mazloom, M. and Payganeh, G. (2016a), "Effects of maximum aggregate size on fracture behaviors of self-compacting lightweight concrete", Constr. Build. Mater., 123, 508-515. https://doi.org/10.1016/j.conbuildmat.2016.07.061
  18. Karamloo, M., Mazloom, M. and Payganeh, G. (2016b), "Influences of water to cement ratio on brittleness and fracture parameters of self-compacting lightweight concrete", Eng. Fract. Mech., 168(A), 227-241. https://doi.org/10.1016/j.engfracmech.2016.09.011
  19. Karamloo, M., Mazloom, M. and Payganeh, G. (2017), "Effect of size on nominal strength of selfcompacting lightweight concrete and self-compacting normal weight concrete: A stress-based approach", Mater. Today Commun., 13, 36-45. https://doi.org/10.1016/j.mtcomm.2017.08.002
  20. Kim, G.M., Nam, I.W., Yoon, H.N. and Lee, H.K. (2018), "Effect of superplasticizer type and siliceous materials on the dispersion of carbon nanotube in cementitious composites", Compos. Struct., 185, 264-272. https://doi.org/10.1016/j.compstruct.2017.11.011
  21. Li, L.G. and Kwan, A.K.H. (2015), "Effects of superplasticizer type on packing density, water film thickness and flowability of cementitious paste", Constr. Build. Mater., 86, 113-119. https://doi.org/10.1016/j.conbuildmat.2015.03.104
  22. Li, P.P., Yu, Q.L. and Brouwers, H.J.H. (2017), "Effect of PCE-type superplasticizer on early-age behaviour of ultra-high performance concrete (UHPC)", Constr. Build. Mater., 153, 740-750. https://doi.org/10.1016/j.conbuildmat.2017.07.145
  23. Lu, C., Yang, H. and Mei, G. (2015), "Relationship between slump flow and rheological properties of self compacting concrete with silica fume and its permeability", Constr. Build. Mater., 75, 157-162. https://doi.org/10.1016/j.conbuildmat.2014.08.038
  24. Ma, B., Peng, Y., Tan, H., Jian, S., Zhi, Z., Guo, Y., Qi, H., Zhang, T. and He, X. (2018), "Effect of hydroxypropyl-methyl cellulose ether on rheology of cement paste plasticized by polycarboxylate superplasticizer", Constr. Build. Mater., 160, 341-350. https://doi.org/10.1016/j.conbuildmat.2017.11.010
  25. Mangane, M.B.C., Argane, R., Trauchessec, R., Lecomte, A. and Benzaazoua, M. (2018), "Influence of superplasticizers on mechanical properties and workability of cemented paste backfill", Miner. Eng., 116, 3-14. https://doi.org/10.1016/j.mineng.2017.11.006
  26. Mardani-Aghabaglou, A., Tuyan, M., Yilmaz, G., Arioz, O. and Ramyar, K. (2013), "Effect of different types of superplasticizer on fresh, rheological and strength properties of self-consolidating concrete", Constr. Build. Mater., 47, 1020-1025. https://doi.org/10.1016/j.conbuildmat.2013.05.105
  27. Mazloom, M. (2008), "Estimating long-term creep and shrinkage of high-strength concrete", Cem. Concr. Compos., 30(4), 316-326. https://doi.org/10.1016/j.cemconcomp.2007.09.006
  28. Mazloom, M., Allahabadi, A. and Karamloo, M. (2017), "Effect of silica fume and polyepoxide-based polymer on electrical resistivity, mechanical properties and ultrasonic response of SCLC", Adv. Concrete Constr., 5(6), 587-611. https://doi.org/10.12989/ACC.2017.5.6.587
  29. Mazloom, M. and Karamloo, M. (2019), "Critical Crack-Tip Opening Displacement of SCLC", Proceedings of the 1st Global Civil Engineering Conference, Lecture Notes in Civil Engineering, Vol. 9., Springer, Singapore.
  30. Mazloom, M. and Mahboubi, F. (2017), "Evaluating the settlement of lightweight coarse aggregate in selfcompacting lightweight concrete", Comput. Concrete, 19(2), 203-210. https://doi.org/10.12989/cac.2017.19.2.203
  31. Mazloom, M. and Miri, S.M. (2017), "Interaction of magnetic water, silica fume and superplasticizer on fresh and hardened properties of concrete", Adv. Concrete Constr., 5(2), 87-99. https://doi.org/10.12989/acc.2017.5.2.087
  32. Mazloom, M., Ramezanianpour, A.A. and Brooks, J.J. (2004), "Effect of silica fume on mechanical properties of high-strength concrete", Cem. Concr. Compos., 26(4), 347-357. https://doi.org/10.1016/S0958-9465(03)00017-9
  33. Mazloom, M., Saffari, A. and Mehrvand, M. (2015), "Compressive, shear and torsional strength of beams made of self-compacting concrete", Comput. Concrete, 15(6), 935-950. https://doi.org/10.12989/cac.2015.15.6.935
  34. Motahari Karein, S.M., Ramezanianpour, A.A., Ebadi, T., Isapour, S. and Karakouzian, M. (2017), "A new approach for application of silica fume in concrete: Wet granulation", Constr. Build. Mater., 157, 573-581. https://doi.org/10.1016/j.conbuildmat.2017.09.132
  35. Msinjili, N.S., Schmidt, W., Mota, B., Leinitz, S., Kuhne, H.C. and Rogge, A. (2017), "The effect of superplasticizers on rheology and early hydration kinetics of rice husk ash-blended cementitious systems", Constr. Build. Mater., 150, 511-519. https://doi.org/10.1016/j.conbuildmat.2017.05.197
  36. Plank, J., Sakai, E., Miao, C.W., Yu, C. and Hong, J.X. (2015), "Chemical admixtures-Chemistry, applications and their impact on concrete microstructure and durability", Cem. Concr. Res., 78(A), 81-99. https://doi.org/10.1016/j.cemconres.2015.05.016
  37. Rossen, J.E., Lothenbach, B. and Scrivener, K.L. (2015), "Composition of C-S-H in pastes with increasing levels of silica fume addition", Cem. Concr. Res., 75, 14-22. https://doi.org/10.1016/j.cemconres.2015.04.016
  38. Roudak, M.A., Shayanfar, M.A., Barkhordari, M.A. and Karamloo, M. (2017a), "A new three-phase algorithm for computation of reliability index and its application in structural mechanics", Mech. Res. Commun., 85, 53-60. https://doi.org/10.1016/j.mechrescom.2017.08.008
  39. Roudak, M.A., Shayanfar, M.A., Barkhordari, M.A. and Karamloo, M. (2017b), "A robust approximation method for nonlinear cases of structural reliability analysis", J. Mech. Sci., 133, 11-20. https://doi.org/10.1016/j.ijmecsci.2017.08.038
  40. Yousuf, F., Wei, X. and Tao, J. (2017), "Evaluation of the influence of a superplasticizer on the hydration of varying composition cements by the electrical resistivity measurement method", Constr. Build. Mater., 144, 25-34. https://doi.org/10.1016/j.conbuildmat.2017.03.138
  41. Zarghami, E., Azemati, H., Fatourehchi, D. and Karamloo, M. (2018), "Customizing well-known sustainability assessment tools for Iranian residential buildings using Fuzzy Analytic Hierarchy Process", Build. Environ., 128, 107-128. https://doi.org/10.1016/j.buildenv.2017.11.032
  42. Zarghami, E., Fatourehchi, D. and Karamloo, M. (2017), "Impact of Daylighting Design Strategies on Social Sustainability Through the Built Environment", Sustain. Dev., 25(6), 504-527. https://doi.org/10.1002/sd.1675
  43. Zhang, M.H., Sisomphon, K., Ng, T.S. and Sun, D.J. (2010), "Effect of superplasticizers on workability retention and initial setting time of cement pastes", Constr. Build. Mater., 24(9), 1700-1707. https://doi.org/10.1016/j.conbuildmat.2010.02.021
  44. Zingg, A., Winnefeld, F., Holzer, L., Pakusch, J., Becker, S., Figi, R. and Gauckler, L. (2009), "Interaction of polycarboxylate-based superplasticizers with cements containing different C3A amounts", Cem. Concr. Compos., 31(3), 153-162. https://doi.org/10.1016/j.cemconcomp.2009.01.005
  45. Zou, F., Tan, H., Guo, Y., Ma, B., He, X. and Zhou, Y. (2017), "Effect of sodium gluconate on dispersion of polycarboxylate superplasticizer with different grafting density in side chain", J. Industrial Eng. Chem., 55, 91-100. https://doi.org/10.1016/j.jiec.2017.06.032

피인용 문헌

  1. Size effect study on compressive strength of SCLC vol.23, pp.6, 2018, https://doi.org/10.12989/cac.2019.23.6.409
  2. Fracture behavior of monotype and hybrid fiber reinforced self-compacting concrete at different temperatures vol.9, pp.4, 2018, https://doi.org/10.12989/acc.2020.9.4.375
  3. Combining internal and external curing to improve quality of self-compacting concrete with consideration of climate effects vol.12, pp.2, 2021, https://doi.org/10.12989/acc.2021.12.2.085
  4. Investigation of ANN architecture for predicting the compressive strength of concrete containing GGBFS vol.16, pp.12, 2018, https://doi.org/10.1371/journal.pone.0260847