DOI QR코드

DOI QR Code

Improvement of MFL sensing-based damage detection and quantification for steel bar NDE

  • Kim, Ju-Won (School of Civil, Architectural Engineering and Landscape Architecture, Sungkyunkwan University) ;
  • Park, Minsu (Department of Civil & Environmental System Engineering, Sungkyunkwan University) ;
  • Kim, Junkyeong (Department of Civil & Environmental System Engineering, Sungkyunkwan University) ;
  • Park, Seunghee (School of Civil, Architectural Engineering and Landscape Architecture, Sungkyunkwan University)
  • 투고 : 2017.05.20
  • 심사 : 2017.11.28
  • 발행 : 2018.08.25

초록

A magnetic flux leakage (MFL) method was applied to detect and quantify defects in a steel bar. A multi-channel MFL sensor head was fabricated using Hall sensors and magnetization yokes with permanent magnets. The MFL sensor head scanned a damaged specimen with five levels of defects to measure the magnetic flux density. A series of signal processing procedures, including an enveloping process based on the Hilbert transform, was performed to clarify the flux leakage signal. The objective damage detection of the enveloped signals was then analyzed by comparing them to a threshold value. To quantitatively analyze the MFL signal according to the damage level, five kinds of damage indices based on the relationship between the enveloped MFL signal and the threshold value were applied. Using the proposed damage indices and the general damage index for the MFL method, the detected MFL signals were quantified and analyzed relative to the magnitude of the damage increase.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea (NRF), Ministry of Land, Infrastructure, and Transport

참고문헌

  1. Abdullah, A.B.M., Rice, J.A. and Hamilton, H.R. (2015), "A strain-based wire breakage identification algorithm for unbonded PT tendons", Smart Struct. Syst., 16(3), 415-433. https://doi.org/10.12989/sss.2015.16.3.415
  2. Boat, M., Pearson, N. and Lieb, R. (2014), "The factors that affect the defect sizing capabilities of the Magnetic Flux Leakage Technique", Proceedings of the 53rd Annual Conference of the British Institute of Non-Destructive Testing, Manchester, September.
  3. Coles, S. (2001), An Introduction to Statistical Modeling of Extreme Values, Springer, Berlin, Germany.
  4. Edwards, C. and Palmer, S.B. (1986), "The magnetic leakage field of surface-breaking cracks", J. Phys. D. Appl. Phys., 19(4), 657-673. https://doi.org/10.1088/0022-3727/19/4/018
  5. Feldman, M. (2006), "Time-varying decomposition and analysis based on the Hilbert transform", J. Sound. Vib., 295(3-5), 518-530. https://doi.org/10.1016/j.jsv.2005.12.058
  6. Goktepe, M. (2001), "Non-destructive crack detection by capturing local flux leakage field", Sens. Actuat. A Phys., 91(1-2), 70-72. https://doi.org/10.1016/S0924-4247(01)00511-8
  7. Kim, J., Kim, J.W., Lee, C. and Park, S. (2017), "Development of embedded EM sensors for estimating tensile forces of PSC girder bridges", Sensors, 17, E1989. https://doi.org/10.3390/s17091989
  8. Kim, J.W. and Park. S. (2017), "Magnetic flux leakage-based local damage detection and quantification for steel wire rope non-destructive evaluation", J. Intel. Mat. Syst. Str., In press.
  9. Kim, J.W., Kim, J., Park. S. and Oh, T. (2014), "Integrating embedded piezoelectric sensors with continuous wavelet transforms for real-time concrete curing strength monitoring", Struct. Infrastruct. E. 11(7), 897-903. https://doi.org/10.1080/15732479.2014.920397
  10. Kim, J.W., Lee, C. and Park. S. (2012), "Damage localization for CFRP-debonding defects using piezoelectric SHM techniques", Res. Nondestruct. Eval., 23(4), 183-196. https://doi.org/10.1080/09349847.2012.660244
  11. Lee, J., Hwang, J., Jun, J. and Choi, S. (2008), "Nondestructive testing and crack evaluation of ferromagnetic material by using the linearly integrated hall sensor array", J. Mech. Sci. Technol., 22, 2310-2317. https://doi.org/10.1007/s12206-008-0908-5
  12. Lenz, J.E. (1990), "A review of magnetic sensors", Proc. of the IEEE, 78(6), 973-989. https://doi.org/10.1109/5.56910
  13. Li, L.M. and Zhang, J.J. (1998), Characterizing the Surface Crack Size by Magnetic Flux Leakage Testing, In: Nondestructive Characterization of Materials VIII, Springer, Boston, USA.
  14. Mukherjee, D., Saha, S. and Mukhopadhyay, S. (2012), "An adaptive channel equalization algorithm for MFL signal", NDT & E Int., 45(1), 111-119. https://doi.org/10.1016/j.ndteint.2011.08.011
  15. Mukhopadhyay, S. and Srivastava, G.P. (2000), "Characterisation of metal loss defects from magnetic flux leakage signals with discrete wavelet transform", NDT&E Int., 33(1), 57-65. https://doi.org/10.1016/S0963-8695(99)00011-0
  16. Park, S., Kim, J.W., Lee, C. and Lee, J.J. (2014), "Magnetic flux leakage sensing-based steel cable NDE technique", J. Shock. Vib., 2014, E929341.
  17. Ramsden, E. (2006), Hall-effect Sensors: Theory and Applications. 2nd Ed., Newnes Books, Oxford, UK.
  18. Sharatchandra, W.S., Rao, B.P.C., Thirunavukkarasu, S. and Jayakumar, T. (2012), "Flexible GMR sensor array for magnetic flux leakage testing of steel track ropes", J. Sensors, 2012, E129074.
  19. Shi, Y., Zhang, C., Li, R., Cai, M. and Jia, G. (2015), "Theory and application of magnetic flux leakage pipeline detection", Sensors, 15(12), 31036-31055. https://doi.org/10.3390/s151229845
  20. Wang, G., Wang, M.L., Zhao, Y., Chen, Y. and Sun, B. (2006), "Application of magnetoelastic stress sensors in large steel cables", Smart Struct. Syst., 2(2), 155-169. https://doi.org/10.12989/sss.2006.2.2.155
  21. Wang, M.L., Wang, G. and Zhao, Y. (2005), Sensing Issues in Civil Structural Health Monitoring, Springer, Dordrecht, Netherlands.
  22. Weischedel, H.R. (1985), "The inspection of wire ropes in service: a critical review", Mater. Eval., 43(13), 1592-1605.
  23. Weischedel, H.R. and Chaplin, C.R. (1991), "Inspection of wire ropes for offshore applications", Mater. Eval., 49(3), 362-367.
  24. Wilson, J.W., Kaba, M. and Tian, G.Y. (2008), "New techniques for the quantification of defects through pulsed magnetic flux leakage", Proceedings of the 17th World Conference on Nondestructive Testing, Shanghai, China, October.
  25. Xue, H., Yang, K. and Yang, S. (1996), "Quantitative inspection of broken wire in wire ropes: method and apparatus", Int. J. Occup. Saf. Ergo., 2(1), 35-40. https://doi.org/10.1080/10803548.1996.11076335
  26. Yang, L., Zhang, G., Liu, G. and Gao, S. (2008) "Effect of lift-off on pipeline magnetic flux leakage inspection", Proceedings of the 17th World Conference on Nondestructive Testing, Shanghai, China, October.
  27. Yim, J., Wang, M.L., Shin, S.W., Yun, C.B., Jung, H.J., Kim, J.T. and Eem, S.H. (2013), "Field application of elasto-magnetic stress sensors for monitoring of cable tension force in cable-stayed bridges", Smart Struct. Syst., 12(3), 465-482. https://doi.org/10.12989/sss.2013.12.3_4.465
  28. Zhang, J. and Tan, X. (2016), "Quantitative inspection of remanence of broken wire rope based on compressed sensing", Sensors, 16(9), E1366. https://doi.org/10.3390/s16091366

피인용 문헌

  1. 누설자속 기반 강판 두께별 국부 손상 진단 감도 분석 vol.11, pp.2, 2018, https://doi.org/10.21729/ksds.2018.11.2.53
  2. MFL-Based Local Damage Diagnosis and SVM-Based Damage Type Classification for Wire Rope NDE vol.12, pp.18, 2019, https://doi.org/10.3390/ma12182894
  3. 강구조물 진단을 위한 누설자속 기반 강판 손상의 이미지화 vol.23, pp.7, 2018, https://doi.org/10.11112/jksmi.2019.23.7.129