DOI QR코드

DOI QR Code

An Experimental Study on Shear Strengthening Effect of I-girder using Externally Bonded CFRP Strips

외부 부착 탄소섬유를 사용한 I형 보의 전단 보강 효과 연구

  • Received : 2018.04.27
  • Accepted : 2018.05.18
  • Published : 2018.07.01

Abstract

Researches on strengthening and rehabilitation methods are being widely conducted due to the deterioration of existing concrete structures. Use of externally bonded Carbon Fiber Reinforced Polymers (CFRP) strips for the rehabilitation is a cost-effective and time-saving method. Generally, the CFRP layout for the shear strengthening was a uni-directional layout. Many researches have focused on the variables of the uni-directional CFRP layout such as the amount of material, angle, and spacing. Pilot tests indicated that the effective confinement of the concrete member can be provided with the bi-directional CFRP layout than the uni-directional layout. Therefore, the test was carried out after the uni- and bi-directional strengthening work using the same amount of CFRP material. CFRP anchors were installed to prevent unexpected premature CFRP delamination failure before reaching CFRP fracture strain. The effectiveness of the CFRP anchor and bi-directional CFRP layout for shear strengthening was verified based on the principal tensile strain contours.

기존 구조물의 노후화로 인하여 보수 및 보강에 관한 연구는 활발히 이루어지고 있다. 탄소섬유를 사용한 외부 부착공법은 경제적이고 짧은 시간에 보강 작업이 이루어질 수 있기 때문에 널리 사용되고 있다. 일반적으로 탄소섬유를 사용한 전단 보강에는 일 방향 레이아웃이 많이 사용되고 있으며, 재료의 양, 섬유의 각도 그리고 간격 등에 관한 실험 연구가 많이 진행되었다. 하지만 예비 실험 결과를 통하여 이 방향 전단보강 레이아웃은 일 방향 전단보강보다 좀 더 효율적으로 부재를 구속하는 것을 확인하였다. 따라서, 유사한 재료의 양을 사용하여 일 방향과 이 방향 전단 보강 작업이 이루어진 후 실험을 통하여 두 보강작업의 효과가 검증되었다. 탄소섬유 보강 작업을 할 때는 탄소섬유의 부착파괴를 방지하기 위하여 탄소섬유 앵커가 설치되었다. 탄소섬유 앵커와 탄소섬유 레이아웃의 전단보강 효과는 실험 경간에 발생한 주인장 변형률의 분포를 통하여 검증되었다.

Keywords

References

  1. Bousselham, A., and Chaallal, O. (2008), Mechanisms of Shear Resistance of Concrete Beams Strengthened in Shear with Externally Bonded FRP, Journal of Composites for Construction, 12(5), 499-512. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:5(499)
  2. Cao, S. Y., Chen, J. F., Teng, J. G., and Chen, J. (2005), Debonding in RC Beams Shear Strengthened with Complete FRP Wraps, Journal of Composites for Construction, 9(5), 417-428. https://doi.org/10.1061/(ASCE)1090-0268(2005)9:5(417)
  3. Chaallal, O., Nollet, M. J., and Perraton, D. (1998), Shear Strengthening of RC Beams by Externally Bonded Side CFRP Strips, Journal of Composites for Construction, 2(2), 111-113. https://doi.org/10.1061/(ASCE)1090-0268(1998)2:2(111)
  4. Deniaud, C., and Cheng, J. J. R. (2003), Reinforced Concrete T-Beams Strengthened in Shear with Fiber Reinforced Polymer Sheets, Journal of Composites for Construction, 7(4), 302-310. https://doi.org/10.1061/(ASCE)1090-0268(2003)7:4(302)
  5. Jirsa, J. O., Ghannoum, W. M., Kim, C., Sun, W., Shekarchi, W. A., Alotaibi, N. K., Pudleiner, D. K., Zhu, J., Liu, S., and Wang, H. (2017), Use of Carbon Fiber Reinforced Polymer (CFRP) with CFRP Anchors for Shear-Strengthening and Design Recommendations/Quality Control Procedures for CFRP Anchors, Report No. FHWA/TX-16/0-6783-1, Center for Transportation Research, The University of Texas at Austin, Texas, 1-278.
  6. Khalifa, A., and Nanni, A. (2000), Improving shear capacity of existing RC T-section beams using CFRP composites, Cement and Concrete Composites, 22, 165-174. https://doi.org/10.1016/S0958-9465(99)00051-7
  7. Kim, C., Ghannoum, W. M., and Jirsa, J. O. (2016), Behavior of Reinforced Concrete Panels Strengthened with Carbon Fiber Reinforced Polymers (CFRP), ACI Structural Journal, 113(5), 1077-1084.
  8. Kim, C., Jirsa, J. O., and Ghannoum, W. M. (2017), Performance of Concrete Panels Reinforced with Carbon Fiber-Reinforced Polymer Materials, Journal of Composites for Construction, ASCE., 21(3), 04016100-1-8. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000758
  9. Kim, Y., Quinn, K., Ghannoum, W. M., and Jirsa, J. O. (2014), Strengthening of Reinforced Concrete T-Beams Using Anchored CFRP Materials, ACI Structural Journal, 111(5), 1027-1036.
  10. Monti, G., and Liotta, M. (2007), Tests and design equations for FRP-strengthening in shear, Construction and Building Materials, 21, 799-809. https://doi.org/10.1016/j.conbuildmat.2006.06.023
  11. Norris, T., Saadatmanesh, H., and Ehsani, M. R. (1997), Shear and Flexural Strengthening of R/C Beams with Carbon Fiber Sheets, Journal of Structural Engineering, 123(7), 903-911. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:7(903)
  12. Tanarslan, H. M., and Altin, S. (2010), Behavior of RC T-section beams strengthened with CFRP strips, subjected to cyclic load, Materials and Structures, 43, 529-542. https://doi.org/10.1617/s11527-009-9509-8