DOI QR코드

DOI QR Code

Analysis of demountable steel and composite frames with semi-rigid bolted joints

  • Wang, Jia (School of Civil and Environmental Engineering, The University of New South Wales) ;
  • Uy, Brian (School of Civil Engineering, The University of Sydney) ;
  • Li, Dongxu (School of Civil Engineering, The University of Sydney)
  • 투고 : 2018.03.13
  • 심사 : 2018.05.10
  • 발행 : 2018.08.10

초록

This paper presented an integral design procedure for demountable bolted composite frames with semi-rigid joints. Moment-rotation relationships of beam-to-column joints were predicted with analytical models aiming to provide accurate and reliable analytical solutions. Among this, initial stiffness of beam-to-column joints was derived on the basis of Timoshenko's plate theory, and moment capacity was derived in accordance with Eurocodes. The predictions were validated with relevant test results prior to further applications. Frame analysis was conducted by using Abaqus software with material and geometrical nonlinearity considered. Variable lateral loads incorporating wind actions and earthquake actions in accordance with Australian Standards were adopted to evaluate the flexural behaviour of the composite frames. Strength and serviceability limit state criteria were utilized to verify configurations of designed models. A wide range of frames with the varied number of storeys and bays were thereafter programmed to ascertain bending moment envelopes under various load combinations. The analytical results suggest that the proposed approach is capable of predicting the moment-rotation performance of the semi-rigid joints reasonably well. Outcomes of the frame analysis indicate that the load combination with dead loads and live loads only leads to maximum sagging and hogging moment magnitudes in beams. As for lateral loads, wind actions are more crucial to dominate the design of the demountable composite frames than earthquake actions. No hogging moment reversal is expected in the composite beams given that the frames are designed properly. The proposed analysis procedure is demonstrated to be a simple and efficient method, which can be applied into engineering practice.

키워드

과제정보

연구 과제 주관 기관 : Australian Research Council (ARC)

참고문헌

  1. Abaqus (2014), User Manual; Version 6.14, DS SIMULIA Corp., Providence, RI, USA.
  2. Abolmaali, A., Matthys, J.H., Farooqi, M. and Choi, Y. (2005), "Development of moment-rotation model equations for flush end-plate connections", J. Constr. Steel Res., 61(12), 1595-1612. https://doi.org/10.1016/j.jcsr.2005.05.004
  3. AS/NZS 1170.0-2002 (2002), Structural design actions. part 0: general principles; Australia.
  4. AS/NZS 1170.1-2002 (2002), Structural design actions. part 1: permanent, imposed and other actions; Australia.
  5. AS/NZS 1170.2-2011 (2011), "Structural design actions. part 2: wind actions", Australia.
  6. AS/NZS 1170.4-2007 (2007), "Structural design actions. Part 4: Earthquake actions in Australia", Australia.
  7. Azizinamini, A., Bradburn, J.H. and Radziminski, J.B. (1987), "Initial stiffness of semi-rigid steel beam-to-column connections", J. Constr. Steel Res., 8, 71-90. https://doi.org/10.1016/0143-974X(87)90054-X
  8. Beena, K., Naveen, K. and Shruti, S. (2017), "Behaviour of bolted connections in concrete-filled steel tubular beam-column joints", Steel Compos. Struct., Int. J., 25(4), 443-456.
  9. Chiew, S.P., Lee, C.K., Lie, S.T. and Ji, H.L. (2007), "Fatigue behaviors of square-to-square hollow section T-joint with corner crack. I: Experimental studies", Eng. Fract. Mech., 74(5), 703-720. https://doi.org/10.1016/j.engfracmech.2006.06.022
  10. Ellobody, E. and Young, B. (2015), "Nonlinear analysis of composite castellated beams with profiled steel sheeting exposed to different fire conditions", J. Constr. Steel Res., 113, 247-260. https://doi.org/10.1016/j.jcsr.2015.02.012
  11. EN 1993-1-1 (2005), Eurocode 3: Design of steel structures. part 1-1: general rules and rules for buildings; European Committee for Standardization, Brussels, Belgium.
  12. EN 1993-1-8 (2010), "Eurocode 3: Design of steel structures. part 1-8: design of joints", European Committee for Standardization, Brussels, Belgium.
  13. EN 1994-1-1 (2004), "Eurocode 4: Design of composite steel and concrete structures. part 1-1: general rules and rules for buildings", European Committee for Standardization, Brussels, Belgium.
  14. EN 1998-1 (2004), "Eurocode 8: Design of structures for earthquake resistance. part 1: general rules, seismic actions and rules for buildings", European Committee for Standardization, Brussels, Belgium.
  15. Ghobarah, A., Mourad, S. and Korol, R.M. (1996), "Momentrotation relationship of blind bolted connections for HSS columns", J. Constr. Steel Res., 40(1), 63-91. https://doi.org/10.1016/S0143-974X(96)00044-2
  16. Gil, B., Goni, R. and Bayo, E. (2013), "Experimental and numerical validation of a new design for three-dimensional semi-rigid composite joints", Eng. Struct., 48, 55-69. https://doi.org/10.1016/j.engstruct.2012.08.034
  17. Han, L.H., Wang, W.D. and Zhao, X.L. (2008), "Behaviour of steel beam to concrete-filled SHS column frames: Finite element model and verifications", Eng. Struct., 30(6), 1647-1658. https://doi.org/10.1016/j.engstruct.2007.10.018
  18. Han, C., Li, Q., Wang, X., Jiang, W. and Li, W. (2016), "Research on rotation capacity of the new precast concrete assemble beamcolumn joints", Steel Compos. Struct., Int. J., 22(3), 613-625. https://doi.org/10.12989/scs.2016.22.3.613
  19. Hicks, S.J. and Pennington, A. (2015), "Partial factors for the design resistance of composite beams in bending", J. Constr. Steel Res., 105(2), 74-85. https://doi.org/10.1016/j.jcsr.2014.10.023
  20. Jeyarajan, S. and Liew, J.Y.R. (2016), "Robustness analysis of 3D Composite buildings with semi-rigid joints and floor slab", Structures, 6, 20-29. https://doi.org/10.1016/j.istruc.2016.01.005
  21. Li, D.X., Uy, B., Patel, V. and Aslani, F. (2016a), "Behaviour and design of demountable steel column-column connections", Steel Compos. Struct., Int. J., 22(2), 429-448. https://doi.org/10.12989/scs.2016.22.2.429
  22. Li, D.X., Uy, B., Aslani, F. and Patel, V. (2016b), "Analysis and design of demountable steel column-baseplate connections", Steel Compos. Struct., Int. J., 22(4), 753-775. https://doi.org/10.12989/scs.2016.22.4.753
  23. Li, D.X., Uy, B., Patel, V. and Aslani, F. (2017), "Analysis and design of demountable embedded steel column base connections", Steel Compos. Struct., Int. J., 23(3), 303-315. https://doi.org/10.12989/scs.2017.23.3.303
  24. Loh, H.Y., Uy, B. and Bradford, M.A. (2006), "The effects of partial shear connection in composite flush end plate joints - Part II - Analytical study and design appraisal", J. Constr. Steel Res., 62(4), 391-412. https://doi.org/10.1016/j.jcsr.2005.07.010
  25. Ma, H.W., Jiang, W.S. and Cho, C. (2011), "Experimental study on two types of new beam-to-column connections", Steel Compos. Struct., Int. J., 11(4), 291-305. https://doi.org/10.12989/scs.2011.11.4.291
  26. Nogueiro, P., Silva, L.S.D., Bento, R. and Simoes, R. (2009), "Calibration of model parameters for the cyclic response of endplate beam-to-column steel-concrete composite joints", Steel Compos. Struct., Int. J., 9(1), 39-58.
  27. Nie, J.G., Tao, M.X., Cai, C.S. and Chen, G. (2011), "Modeling and investigation of elasto-plastic behavior of steel-concrete composite frame systems", J. Constr. Steel Res., 67(12), 1973-1984. https://doi.org/10.1016/j.jcsr.2011.06.016
  28. Song, T.Y., Tao, Z., Razzazzadeh, A., Han, L.H. and Zhou, K. (2017), "Fire performance of blind bolted composite beam to column joints", J. Constr. Steel Res., 132(5), 29-42. https://doi.org/10.1016/j.jcsr.2017.01.011
  29. Thai, H.T. and Uy, B. (2016), "Rotational stiffness and moment resistance of bolted endplate joints with hollow or CFST columns", J. Constr. Steel Res., 126, 139-152. https://doi.org/10.1016/j.jcsr.2016.07.005
  30. Thai, H.T., Uy, B., Kang, W.H. and Hicks, S. (2016), "System reliability evaluation of steel frames with semi-rigid connections", J. Constr. Steel Res., 121, 29-39. https://doi.org/10.1016/j.jcsr.2016.01.009
  31. Timoshenko, S. and Woinowsky-Krieger, S. (1959), Theory of Plates and Shells, (2nd Edition), McGraw-Hill, New York, NY, USA.
  32. Uy, B. (2012), "Applications, behaviour and design of composite steel-concrete structures", Adv. Struct. Eng., 15(9), 1559-1571. https://doi.org/10.1260/1369-4332.15.9.1559
  33. Uy, B., Patel, V., Li, D.X. and Aslani, F. (2017), "Behaviour and design of connections for demountable steel and composite structures", Structures, 9, 1-12. https://doi.org/10.1016/j.istruc.2016.06.005
  34. Wang, A.J. (2010), "A study on composite end-plate connections with flexible tensile reinforcements and shear connectors", Can. J. Civil Eng., 37(11), 1437-1450. https://doi.org/10.1139/L10-089
  35. Wang, J., Uy, B., Thai, H.T. and Li, D.X. (2018), "Behaviour and design of demountable beam-to-column composite bolted joints with extended end-plates", J. Constr. Steel Res., 144, 221-235. https://doi.org/10.1016/j.jcsr.2018.02.002
  36. Wang, J., Pan, X. and Peng, X. (2017a), "Pseudo-dynamic tests of assembly blind bolted composite frames to CFST columns", J. Constr. Steel Res., 139, 83-100. https://doi.org/10.1016/j.jcsr.2017.08.013
  37. Wang, J.F., Li, B.B., Wang, D.H. and Zhao, C.F. (2017b), "Cyclic testing of steel beam blind bolted to CFST column composite frames with SBTD concrete slabs", Eng. Struct., 148(10), 293-311. https://doi.org/10.1016/j.engstruct.2017.06.065
  38. Yang, B., Tan, k.H. and Xiong, G. (2015), "Behaviour of composite beam-column joints under a middle-column-removal scenario: Component-based modelling", J. Constr. Steel Res., 104, 137-154. https://doi.org/10.1016/j.jcsr.2014.10.003
  39. Yee, Y.L. and Melchers, R.E. (1986), "Moment-Rotation Curves for Bolted Connections", J. Struct. Eng., 112(3), 615-635. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:3(615)
  40. Zhao, H. (2016), "Analysis of seismic behavior of composite frame structures", Steel Compos. Struct., Int. J., 20(3), 719-729. https://doi.org/10.12989/scs.2016.20.3.719

피인용 문헌

  1. Initial stiffness and moment capacity assessment of stainless steel composite bolted joints with concrete-filled circular tubular columns vol.33, pp.5, 2018, https://doi.org/10.12989/scs.2019.33.5.681
  2. Modeling of wedge-pin joint for the dynamic analysis of a planar temporary demountable structure vol.24, pp.5, 2018, https://doi.org/10.1177/1369433220971734