참고문헌
- 곽기호, 박성우, "글로벌 3D 프린트산업 기술동향 분석", 한국기계연구원, 기계기술정책 71, 2013년.
- J. C. S. Chieh, B. Dick, S. Loui, and J. D. Rockway, "Development of a Ku-band corrugated conical horn using 3D print technology", IEEE Antennas and Wireless Propagation Letter, vol. 13, pp. 201-204, Feb. 2014. https://doi.org/10.1109/LAWP.2014.2301169
- M. Liang, W. R. Ng, K. Chang, K. Gbele, M. E. Gehm, and H. Xin, "A 3D Luneberg lengs antenna fabricated by polymer jetting rapid prototyping", IEEE Trans. Antennas and Propagation, vol. 62, no. 4, pp. 1799-1807, Apr. 2014. https://doi.org/10.1109/TAP.2013.2297165
- B. Sanz-Izquierdo and E. A. Parker, "3D printing of elements in frequency selective arrays", IEEE Trans. Antennas and Propagation, vol. 62, no. 12, pp. 6060-6066, Dec. 2014. https://doi.org/10.1109/TAP.2014.2359470
- P. Nayeri, L. Min, R. A. Sabory-Garcia, M. Tuo, F. Yang, M. Cehm, H. Xin, and A. Z. Elshebeni, "3D printed dielectric reflectarrays: Low-cost high-gain antennas at sub-millimeter waves", IEEE Trans. Antennas and Propagation, vol. 62, no. 4, pp. 2000-2008, Apr. 2014. https://doi.org/10.1109/TAP.2014.2303195
- M. D'Auria, W. J. Otter, J. Hazell, B. T. W. Gillatt, C. Long-Collins, N. M. Ridler, and S. Lucyszyn, "3D printed metal-pipe rectangular waveguides", IEEE Trans. Comp. Packag. Manuf. Technol., vol. 5, no. 9, pp. 1339-1348, Sep. 2015. https://doi.org/10.1109/TCPMT.2015.2462130
- Paul I. Deffenbaugh, Thomas M. Weller, and Kenneth H. Church, "Fabrication and microwave characterization of 3-D printed transmission lines", IEEE Microwave abd Wireless Components Letters, vol. 25, no. 12, pp. 823-825, Dec. 2015. https://doi.org/10.1109/LMWC.2015.2495184
- G. Venanzoni, M. Dionigi, C. Tomassoni, D. Eleonori, and R. Sorrentino, "3D printing of X band waveguide resonators and filters", 32nd URSI GASS, Motreal, pp. 19-26, Aug. 2017.
- C. Guo, X. Shang, M. J. Lancaster, and J. Xu, "A 3D printed lightweight X-band waveguide filter based on spherical resonators", IEEE Microwave and Wireless Components Letters, vol. 25, no. 7, pp. 442-444, Jul. 2015. https://doi.org/10.1109/LMWC.2015.2427653
- G. P. L. Sage, "3D printed waveguide slot array antennas", IEEE Access, vol. 4, pp. 1258-1265, Apr. 2016. https://doi.org/10.1109/ACCESS.2016.2544278
- H. Saeidi-Manesh, S. Saeedi, M. Mirmozafari, G. Zhang, and H. H. Sigmarsson, "Design and fabrication of orthogonal mode transducer using 3D printing technology", IEEE Antennas and Wireless Propagation Letter, May 2018.
- E. Decrossas, T. Reck, C. Lee, C. Jung-Kubiak, I. Mehdi, and G. Chattopadhyay, "Evaluation of 3D printing technology for corrugated horn antenna manufacturing", IEEE International Symposium on Electromagnetic Compatibility, Sep. 2016.
- H. Yao, S. Sharma, R. Henderson, S. Ashrafi, and D. MacFarlane, "Ka band 3D printed horn antennas", 2017 Texas Symposium on Wireless and Microwave Circuits and Systems, Oct. 2017.
- S. T. Kim, J. W. Lee, and T.-K. Lee, "Performance investigation of feed horn using FDM 3D printing technology", 2018 International Symposium on Antennas and Propagation, Oct. 2018(To be published).
- S. S. Yoon, J. W. Lee, T.-K. Lee, and J. H. Roh, "Insensitivity characteristics in the dual polarization of deployable CFRP reflector antennas", IEEE Trans. on Antennas and Propagation, vol. 66, no. 1, pp. 88-95, Jan. 2018. https://doi.org/10.1109/TAP.2017.2772315