Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of the Effect of Coupler on the Ductility of Rebar by Uniaxial Tensile Test

1축 인장시험을 통한 커플러가 철근 연성도에 미치는 영향 평가

  • 우태련 (부산대학교 사회환경시스템공학과) ;
  • 이종한 (대구대학교 건설시스템공학과) ;
  • 정진환 (부산대학교 사회환경시스템공학과) ;
  • 정치영 (부산대학교 지진방재연구센터)
  • Received : 2017.08.18
  • Accepted : 2017.10.12
  • Published : 2018.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, various reinforced concrete joints have been used in reinforced concrete structures. Therefore, it is important to grasp the tensile properties of the spliced rebar. In this study, uniaxial tensile tests were conducted on Grade 60 D22(#7), D29(#9), and two kinds of couplers manufactured according to ASTM A615 standard for evaluating ductility of coupler joints. The strain was measured using an image processing method more accurate and capable of measuring at various points freely. As the result of uniaxial tensile test, it was possible to calculate the stress-strain relationship and the longitudinal strain distribution according to the stress stages and it was founded that the average strain becomes lower as more occupying the coupler joint portions in the same gauge length. In addition, the empirical equations are proposed to account for the effect of the length of the coupler on the ultimate strain and the rupture strain.

최근 철근 콘크리트 구조물에 다양한 철근 이음이 사용되고 있다. 이에 따라 커플러 이음 철근의 인장 특성에 대한 파악이 중요해졌다. 본 연구에서는 커플러 이음 철근의 연성도에 대한 평가를 위하여 ASTM A615 기준에 따라 생산된 Grade 60 D22(#7), D29(#9), 그리고 두 종류의 커플러를 상대로 1축 인장시험을 수행하였다. 보다 정확하고 다양한 지점에서 자유로운 계측이 가능한 이미지 프로세싱 방법을 사용하여 변형률을 계측하였다. 1축 인장시험 결과, 응력-변형률 관계와 응력 단계별 종방향 변형률 분포를 산출할 수 있었고, 이를 통하여 동일한 표점거리 내에서 커플러 이음 부분이 많이 차지할수록 평균변형률이 낮아지는 것을 알 수 있었다. 또한 커플러 이음철근의 극한거동 및 파단 시변형률에 대한 평가를 통해 커플러의 길이에 대한 한계상태변형률과 파단변형률과의 상관관계를 정식화하였다.

Keywords

References

  1. ASTM A370-14, Standard Test Methods and Definitions for Mechanical Testing of Steel Products, ASTM International 2014.
  2. ASTM A615-14, Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement, ASTM International 2014.
  3. Barranger, Y., Doumalin, P., Dupre, J. C., and Germaneau (2012), A Strain Measurement by Digital Image Correlation: Influence of Two Types of Speckle Patterns made from Rigid or Deformable Marks Strain, 48, 357-65. https://doi.org/10.1111/j.1475-1305.2011.00831.x
  4. Cheung, J. H., Lee, J. H., Woo, T. R., and Jung, C. Y. (2017), Evaluation on Strain and Necking Region of the Rebar by Using Image Processing Method, Journal of the Korea Concrete Institute, KCI, 29(1), 33-42. https://doi.org/10.4334/JKCI.2017.29.1.033
  5. Choi, H. B. (2007), A Study on Development of TEMPCORE Re-bar Mechanical Connection by Making Screw on Node and Rib, Korea University, Master's Thesis, 21-22.
  6. Choi, H. B., Kim, G. H., Kim, J. Y., Seo, D. S., and Kang, K. I. (2003), A Study on Development of Tempcore Re-bar Mechanical Connection by Making Screw, Journal of the Architectural Institute of Korea Structure & Construction, AIK, 19(3), 99-106.
  7. Choi, H. S., Cheung, J. H., Kim, S. H., and Ahn, J. H. (2011), Structural Dynamic Displacement Vision System Sing Digital Image Processing, NDT&E International, 44, 597-608. https://doi.org/10.1016/j.ndteint.2011.06.003
  8. Kim, S. D., Jung, C. Y., Woo, T. R., and Cheung, J. H. (2016), Application of Image Processing Method to Evaluate Ultimate Strain of rebar, Journal of the Korea Institute for Structural Maintenance and Inspection, KSMI, 20(3), 111-121. https://doi.org/10.11112/JKSMI.2016.20.3.111
  9. Korea Institute of Construction Technology : KICT and E&D MALL Co. (2007), A Study on the Performance of H.S.S.(Hybrid Splice Sleeve) applied to High Strength Reinforcement(SD500) Joint, KICT, Report.
  10. Kwon, K. J., Park, D. S., and Joung, W. S. (2011), Experimental Evaluation on Structural Performance of Large Diameter Reinforcing Steel Bars with Spliced Sleeves, Journal of the Korea Institute for Structural Maintenance and Inspection, KSMI, 15(1), 180-188. https://doi.org/10.11112/jksmi.2011.15.1.180
  11. Samsung Heavy Industries Co. (1999), Reinforcing Method using Easy Coupler, Ministry of Land, Infrastructure and Transport, New Construction Technology.
  12. Sim, J. S., Park, C. W., Kang, T. S., and Kim, T. S. (2008), An Experimental Study of Tension Properties on New Developed Up Set Coupler, Journal of the Korea Institute for Structural Maintenance and Inspection, KSMI, 12(5), 109-115.
  13. Won, D. H., Lee, J. H., Meng, L. Y., and Kang, Y. J. (2017), Experimental Study on Column-Foundation Connection of Composite Hollow RC Column, Journal of Korean Society of Hazard Mitigation, KOSHAM, 16(1), 169-178. https://doi.org/10.9798/KOSHAM.2016.16.1.169