Structural Engineering and Mechanics

  • 제67권3호
  • /
  • Pages.283-290
  • /
  • 2018
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of using recycled coarse aggregate and recycled asphalt pavement on the properties of pervious concrete

  • Shatarat, Nasim K. (Civil Engineering Department, The University of Jordan) ;
  • Katkhuda, Hasan N. (Civil Engineering Department, The Hashemite University) ;
  • Hyari, Khaled H. (Civil Engineering Department, The Hashemite University) ;
  • Asi, Ibrahim (Arab Center for Engineering Studies)
  • 투고 : 2017.08.08
  • 심사 : 2018.05.19
  • 발행 : 2018.08.10
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents the results of a study that investigated the influence of using recycled coarse aggregate (RCA) and recycled asphalt pavement (RAP) on the properties of pervious concrete (PC). The natural aggregate (NA) was replaced by RCA and RAP in the PC with replacement levels of 0%, 20%, 40%, 60% and 80% by the total weight of NA, respectively. In addition to incorporating RAP and RCA in the same mixes with replacement levels of: (1) 20% RAP and 80% RCA; (2) 60% RAP and 40% RCA; and (3) 80% RAP and 20% RCA. Water permeability, thermal conductivity, density, porosity, void content, and compressive, splitting tensile and flexural strengths were studied in this paper. The results showed that using RCA, RAP, and (RAP-RCA) enhanced the properties of PC in general and improved the mechanical properties significantly in particular. The optimum mix was reported to be the 60% RAP and 40% RCA. Accordingly, the RAP has the potential to be used in PC in order to reduce the negative impact of RAP on the human health and environment.

키워드

참고문헌

  1. ASTM C29-17 Standard Test Method for Bulk Density (Unit Weight) and Voids in Aggregate.
  2. ASTM C127-15 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate.
  3. ASTM C1754-12 Standard Test Method for Density and Void Content of Hardened Pervious Concrete.
  4. ASTM C131-14 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine.
  5. ASTM C39-17 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens.
  6. ASTM C496-11 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens.
  7. ASTM C293-16 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading).
  8. Andre, A., De Brito, J., Rosa, A. and Pedro, D. (2014), "Durability performance of concrete incorporating coarse aggregates from marble industry waste", J. Clean. Prod., 65, 389-396. https://doi.org/10.1016/j.jclepro.2013.09.037
  9. Al-Oraimi, S., Hassan, H.F. and Hago, A. (2009), "Recycling of reclaimed asphalt pavement in Portland cement concrete", J. Eng. Res., 6(1), 37-45. https://doi.org/10.24200/tjer.vol6iss1pp37-45
  10. Brake, N.A., Allahdadi, H. and Adam, F. (2016), "Flexural strength and fracture size effects of pervious concrete", Constr. Build. Mater., 113, 536-543. https://doi.org/10.1016/j.conbuildmat.2016.03.045
  11. Bravo, M., De Brito, J., Pontes, J. and Evangelista, L. (2015), "Durability performance of concrete with recycled aggregates from construction and demolition waste plants", Constr. Build. Mater., 77, 357-369. https://doi.org/10.1016/j.conbuildmat.2014.12.103
  12. Barnhouse, P.W. and Srubar III, W.V. (2016), "Material characterization and hydraulic conductivity modeling of macroporous recycled-aggregate pervious concrete", Constr. Build. Mater., 110, 89-97. https://doi.org/10.1016/j.conbuildmat.2016.02.014
  13. Brand, A.S. and Roesler, J.R. (2015), "Ternary concrete with fractionated reclaimed asphalt pavement", Mater. J., 112(1), 155-164.
  14. Bilondi, M.P., Marandi, S.M. and Ghasemi, F. (2016), "Effect of recycled glass powder on asphalt concrete modification", Struct. Eng. Mech., 59(2), 373-385. https://doi.org/10.12989/sem.2016.59.2.373
  15. Chandrappa, A.K. and Biligiri, K.P. (2016), "Pervious concrete as a sustainable pavement material-research findings and future prospects: A state-of-the-art review", Constr. Build. Mater., 111, 262-274. https://doi.org/10.1016/j.conbuildmat.2016.02.054
  16. Chang, J.J., Yeih, W., Chung, T.J. and Huang, R. (2016), "Properties of pervious concrete made with electric arc furnace slag and alkali-activated slag cement", Constr. Build. Mater., 109, 34-40. https://doi.org/10.1016/j.conbuildmat.2016.01.049
  17. Chinchillas-Chinchillas, M.J., Corral-Higuera, R., Gomez-Soberon, J.M., Arredondo-Rea, S.P., Alamaral-Sanchez, J.L., Acuna-Aguero, O.H. and Rosas-Casarez, C.A. (2014), "Influence of the shape of the natural aggregates, recycled and silica fume on the mechanical properties of pervious concrete", Int. J. Adv. Comput. Sci. Appl., 4(4), 216-220.
  18. Erdem, S. and Blankson, M.A. (2014), "Environmental performance and mechanical analysis of concrete containing recycled asphalt pavement (RAP) and waste precast concrete as aggregate", J. Hazard. Mater., 264, 403-410. https://doi.org/10.1016/j.jhazmat.2013.11.040
  19. Ferguson, B.K. (2005), Pervious Pavements, Taylor and Francis Group, New York, U.S.A.
  20. Tennis, P.D., Leming, M.L. and Akers, D.J. (2004), Pervious Concrete Pavements, EB302 Portland Cement Association Skokie Illinois and National Ready Mixed Concrete Association, Silver, Spring, Maryland, U.S.A.
  21. Gesoglu, M., Guneyisi, E., Khoshnaw, G. and Ipek, S. (2014), "Investigating properties of pervious concretes containing waste tire rubbers", Constr. Build. Mater., 63, 206-213. https://doi.org/10.1016/j.conbuildmat.2014.04.046
  22. Gesoglu, M., Guneyisi, E., Khoshnaw, G. and Ipek, S. (2014), "Abrasion and freezing-thawing resistance of pervious concretes containing waste rubbers", Constr. Build. Mater., 73, 19-24. https://doi.org/10.1016/j.conbuildmat.2014.09.047
  23. Guneyisi, E., Gesoglu, M., Kareem, Q. and Ipek, S. (2016), "Effect of different substitution of natural aggregate by recycled aggregate on performance characteristics of pervious concrete", Mater. Struct., 49(1), 521-536. https://doi.org/10.1617/s11527-014-0517-y
  24. Hesami, S., Ahmadi, S. and Nematzadeh, M. (2014), "Effects of rice husk ash and fiber on mechanical properties of pervious concrete pavement", Constr. Build. Mater., 53, 680-691. https://doi.org/10.1016/j.conbuildmat.2013.11.070
  25. Huang, B., Shu, X. and Burdette, E.G. (2006), "Mechanical properties of concrete containing recycled asphalt pavements", Mag. Concrete Res., 58(5), 313-320. https://doi.org/10.1680/macr.2006.58.5.313
  26. Huang, B., Shu, X. and Li, G. (2005), "Laboratory investigation of Portland cement concrete containing recycled asphalt pavements", Cement Concrete Res., 35(10), 2008-2013. https://doi.org/10.1016/j.cemconres.2005.05.002
  27. Ibrahim, H.A. and Abdul Razak, H. (2016), "Effect of palm oil clinker incorporation on properties of pervious concrete", Constr. Build. Mater., 115, 70-77. https://doi.org/10.1016/j.conbuildmat.2016.03.181
  28. Khankhaje, E., Salim, M.R., Mirza, J., Salmiati, H.M.W., Khan, R. and Rafieizonooz, M. (2017), "Properties of quiet pervious concrete containing oil palm kernel shell and cockleshell", Appl. Acoust., 122, 113-120. https://doi.org/10.1016/j.apacoust.2017.02.014
  29. Katkhuda, H. and Shatarat, N. (2016), "Shear behavior of reinforced concrete beams using treated recycled concrete aggregate", Constr. Build. Mater., 125, 63-71. https://doi.org/10.1016/j.conbuildmat.2016.08.034
  30. Katkhuda, H. and Shatarat, N. (2017), "Improving the mechanical properties of recycled concrete aggregate using chopped basalt fibers and acid treatment", Constr. Build. Mater., 140, 328-335. https://doi.org/10.1016/j.conbuildmat.2017.02.128
  31. Katkhuda, H., Shatarat, N. and Hyari, K. (2017), "Effect of silica fume on mechanical properties of concrete containing recycled asphalt pavement", Struct. Eng. Mech., 62(3), 357-364. https://doi.org/10.12989/sem.2017.62.3.357
  32. Koenders, E., Pepe, M. and Martinelli, E. (2014), "Compressive strength and hydration processes of concrete with recycled aggregates", Cement Concrete Res., 56, 203-212. https://doi.org/10.1016/j.cemconres.2013.11.012
  33. Modarres, A. and Hosseini, Z. (2014), "Mechanical properties of roller compacted concrete containing rice husk ash with original and recycled asphalt pavement material", Mater. Des., 64, 227-236. https://doi.org/10.1016/j.matdes.2014.07.072
  34. Nguyen, D.H., Boutouil, M., Sebaibi, N., Baraud, F. and Leleyter, L. (2017), "Durability of pervious concrete using crushed seashells", Constr. Build. Mater., 135, 137-150. https://doi.org/10.1016/j.conbuildmat.2016.12.219
  35. Osic, K.C., Korat, L., Ducman, V. and Netinger, I. (2015), "Influence of aggregate type and size on properties of pervious concrete", Constr. Build. Mater., 78, 69-76. https://doi.org/10.1016/j.conbuildmat.2014.12.073
  36. Okafor, F. (2010), "Performance of recycled asphalt pavement as coarse aggregate in concrete", Leon. Electr. J. Pract. Technol., 17, 47-58.
  37. Saravanakumar, P. and Dhinakaran, G. (2013), "Durability characteristics of recycled aggregate concrete", Struct. Eng. Mech., 47(5), 701-711. https://doi.org/10.12989/sem.2013.47.5.701
  38. Shah, A., Jan, I.U., Khan, R.U. and Qazi, E.U. (2013), "Experimental investigation on the use of recycled aggregates in producing concrete", Struct. Eng. Mech., 47(4), 545-557. https://doi.org/10.12989/sem.2013.47.4.545
  39. Seo, D.S. and Choi, H.B. (2014), "Effects of the old cement mortar attached to the recycled aggregate surface on the bond characteristics between aggregate and cement mortar", Constr. Build. Mater., 59, 72-77. https://doi.org/10.1016/j.conbuildmat.2014.02.047
  40. Shi, C., Li, Y., Zhang, J., Li, W., Chong, L. and Xie, Z. (2016), "Performance enhancement of recycled concrete aggregate: A review", J. Clean. Prod., 112, 466-472. https://doi.org/10.1016/j.jclepro.2015.08.057
  41. Shahidan, S., Azmi, M.Z.M, Kupusamy, K., Zuki, S.S.M. and Ali, N. (2017), "Utilizing construction and demolition (C&D) waste as recycled aggregates (RA) in concrete", Proc. Eng., 174, 1028-1035. https://doi.org/10.1016/j.proeng.2017.01.255
  42. Sriravindrarajah, R., Wang, N.D.H. and Ervin, L.J.W. (2012), "Mix design for pervious recycled aggregate concrete", Int. J. Concrete Struct. Mater., 6(4), 239-246. https://doi.org/10.1007/s40069-012-0024-x
  43. Saride, S., Avirneni, D. and Challapalli, S. (2016), "Micromechanical interaction of activated fly ash mortar and reclaimed asphalt pavement materials", Constr. Build. Mater., 123, 424-435. https://doi.org/10.1016/j.conbuildmat.2016.07.016
  44. Tavares, L.M. and Kazmierczak, C.S. (2016), "The influence of recycled concrete aggregates in pervious concrete", Ibracon Struct. Mater. J., 9(1), 75-90.
  45. Yeih, W., Fu, T.C., Chang, J.J. and Huang, R. (2015), "Properties of pervious concrete made with air-cooling electric arc furnace slag as aggregates", Constr. Build. Mater., 93, 737-745. https://doi.org/10.1016/j.conbuildmat.2015.05.104
  46. Yildirim, S., Meyer, C. and Herfellner, S. (2015), "Effects of internal curing on the strength, drying shrinkage and freezethaw resistance of concrete containing recycled concrete aggregates", Constr. Build. Mater., 91, 288-296. https://doi.org/10.1016/j.conbuildmat.2015.05.045
  47. Zhang, J., Shi, C., Li, Y., Pan, X., Poon, C. and Xie, Z. (2015), "Performance enhancement of recycled concrete aggregates through carbonation", J. Mater. Civil Eng., 27(11), 04015029. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001296
  48. Zhang, Z., Zhang, Y., Yan, C. and Liu, Y. (2017), "Influence of crushing index on properties of recycled aggregates pervious concrete", Constr. Build. Mater., 135, 112-118. https://doi.org/10.1016/j.conbuildmat.2016.12.203
  49. Zaetang, Y., Sata, V., Wongsa, A. and Chindaprasirt, P. (2016), "Properties of pervious concrete containing recycled concrete block aggregate and recycled concrete aggregate", Constr. Build. Mater., 111, 15-21. https://doi.org/10.1016/j.conbuildmat.2016.02.060

피인용 문헌

  1. Studying the Properties of SBS/Rice Husk Ash-Modified Asphalt Binder and Mixture vol.2020, pp.None, 2020, https://doi.org/10.1155/2020/4545063
  2. Residual Properties and Axial Bearing Capacity of Steel Reinforced Recycled Aggregate Concrete Column Exposed to Elevated Temperatures vol.7, pp.None, 2018, https://doi.org/10.3389/fmats.2020.00187
  3. Combined Prediction Method for Thermal Conductivity of Asphalt Concrete Based on Meso-Structure and Renormalization Technology vol.12, pp.2, 2018, https://doi.org/10.3390/app12020857