DOI QR코드

DOI QR Code

A novel shear and normal deformation theory for hygrothermal bending response of FGM sandwich plates on Pasternak elastic foundation

  • Abazid, Mohammad Alakel (Department of Mathematics and Statistics, Faculty of Science, King Faisal University) ;
  • Alotebi, Muneerah S. (Department of Mathematics, Faculty of Arts and Science at Nairiyah, Hafr Al Batin University) ;
  • Sobhy, Mohammed (Department of Mathematics and Statistics, Faculty of Science, King Faisal University)
  • 투고 : 2018.03.25
  • 심사 : 2018.05.13
  • 발행 : 2018.08.10

초록

This paper deals with the static bending of various types of FGM sandwich plates resting on two-parameter elastic foundations in hygrothermal environment. The elastic foundation is modeled as Pasternak's type, which can be either isotropic or orthotropic and as a special case, it converges to Winkler's foundation if the shear layer is neglected. The present FGM sandwich plate is assumed to be made of a fully ceramic core layer sandwiched by metal/ceramic FGM coats. The governing equations are derived from principle of virtual displacements based on a shear and normal deformations plate theory. The present theory takes into account both shear and normal strains effects, thus it predicts results more accurate than the shear deformation plate theories. The results obtained by the shear and normal deformation theory are compared with those available in the literature and also with those obtained by other shear deformation theories. It is concluded that the present results are slightly deviated from other results because the normal deformation effect is taken into account. Numerical results are presented to show the effects of the different parameters, such as side-to-thickness ratio, foundation parameters, aspect ratio, temperature, moisture, power law index and core thickness on the stresses and displacements of the FG sandwich plates.

키워드

참고문헌

  1. Abazid, M.A. and Sobhy, M. (2018), "Thermo-electro-mechanical bending of FG piezoelectric microplates on Pasternak foundation based on a four-variable plate model and the modified couple stress theory", Microsyst. Technol., 24(2), 1227-1245. https://doi.org/10.1007/s00542-017-3492-8
  2. Alibeigloo, A. and Liew, K.M. (2014), "Free vibration analysis of sandwich cylindrical panel with functionally graded core using three-dimensional theory of elasticity", Compos. Struct., 113, 23-30. https://doi.org/10.1016/j.compstruct.2014.03.004
  3. Anderson, T.A. (2003), "A 3-D elasticity solution for a sandwich composite with functionally graded core subjected to transverse loading by a rigid sphere", Compos. Struct., 60(3), 265-274. https://doi.org/10.1016/S0263-8223(03)00013-8
  4. Aragh, B.S. and Yas, M.H. (2011), "Effect of continuously grading fiber orientation face sheets on vibration of sandwich panels with FGM core", Int. J. Mech. Sci., 53(8), 628-638. https://doi.org/10.1016/j.ijmecsci.2011.05.009
  5. Arefi, M. and Zenkour, A.M. (2016), "Employing sinusoidal shear deformation plate theory for transient analysis of three layers sandwich nanoplate integrated with piezo-magnetic facesheets", Smart Mater. Struct., 25(11), 115040. https://doi.org/10.1088/0964-1726/25/11/115040
  6. Arefi, M. and Zenkour, A.M. (2017a), "Influence of micro-lengthscale parameters and inhomogeneities on the bending, free vibration and wave propagation analyses of a FG Timoshenko's sandwich piezoelectric microbeam", J. Sandw. Struct. Mater., 1099636217714181.
  7. Arefi, M. and Zenkour, A.M. (2017b), "Size-dependent vibration and bending analyses of the piezomagnetic three-layer nanobeams", Appl. Phys. A, 123(3), 202.
  8. Arefi, M. and Zenkour, A.M. (2017c), "Thermo-electromechanical bending behavior of sandwich nanoplate integrated with piezoelectric face-sheets based on trigonometric plate theory", Compos. Struct., 162, 108-122. https://doi.org/10.1016/j.compstruct.2016.11.071
  9. Arefi, M. and Zenkour, A.M. (2017d), "Vibration and bending analysis of a sandwich microbeam with two integrated piezomagnetic face-sheets", Compos. Struct., 159, 479-490. https://doi.org/10.1016/j.compstruct.2016.09.088
  10. Arefi, M. and Zenkour, A.M. (2017e), "Nonlocal electro-thermomechanical analysis of a sandwich nanoplate containing a Kelvin-Voigt viscoelastic nanoplate and two piezoelectric layers", Acta Mech., 228(2), 475-493. https://doi.org/10.1007/s00707-016-1716-0
  11. Arefi, M. and Zenkour, A.M. (2017f), "Effect of thermo-magnetoelectro-mechanical fields on the bending behaviors of a threelayered nanoplate based on sinusoidal shear-deformation plate theory", J. Sandw. Struct. Mater., 1099636217697497.
  12. Arefi, M. and Zenkour, A.M. (2017g), "Size-dependent electroelastic analysis of a sandwich microbeam based on higher-order sinusoidal shear deformation theory and strain gradient theory", J. Intell. Mater. Syst. Struct., 1045389X17733333.
  13. Arefi, M. and Zenkour, A.M. (2017h), "Size-dependent free vibration and dynamic analyses of piezo-electro-magnetic sandwich nanoplates resting on viscoelastic foundation", Phys. B, 521, 188-197. https://doi.org/10.1016/j.physb.2017.06.066
  14. Arefi, M. and Zenkour, A.M. (2017i), "Vibration and bending analyses of magneto-electro-thermo-elastic sandwich microplates resting on viscoelastic foundation", Appl. Phys. A, 123(8), 550. https://doi.org/10.1007/s00339-017-1156-2
  15. Arefi, M. and Zenkour, A.M. (2017j), "Thermo-electro-magnetomechanical bending behavior of size-dependent sandwich piezomagnetic nanoplates", Mech. Res. Comm., 84, 27-42. https://doi.org/10.1016/j.mechrescom.2017.06.002
  16. Arefi, M., and Zenkour, A.M. (2018), "Free vibration analysis of a three-layered microbeam based on strain gradient theory and three-unknown shear and normal deformation theory", Steel Compos. Struct., 26(4), 421-437. https://doi.org/10.12989/SCS.2018.26.4.421
  17. Arefi, M., Bidgoli, E.M.R. and Zenkour, A.M. (2018), "Free vibration analysis of a sandwich nano-plate including FG core and piezoelectric face-sheets by considering neutral surface", Mech. Adv. Mater. Struct., 1-12.
  18. Aydogdu, M. (2009), "A new shear deformation theory for laminated composite plates", Compos. Struct., 89(1), 94-101. https://doi.org/10.1016/j.compstruct.2008.07.008
  19. Bouafia, K., Kaci, A., Houari, M.S.A., Benzair, A. and Tounsi, A. (2017), "A nonlocal quasi-3D theory for bending and free flexural vibration behaviors of functionally graded nanobeams", Smart Struct. Syst., 19(2), 115-126. https://doi.org/10.12989/sss.2017.19.2.115
  20. Bouderba, B., Houari, M.S.A., Tounsi, A. and Mahmoud, S.R. (2016), "Thermal stability of functionally graded sandwich plates using a simple shear deformation theory", Struct. Eng. Mech., 58(3), 397-422. https://doi.org/10.12989/sem.2016.58.3.397
  21. Carrera, E. (2002), "Theories and finite elements for multilayered, anisotropic, composite plates and shells", Arch. Comput. Meth. Eng., 9(2), 87-140. https://doi.org/10.1007/BF02736649
  22. Carrera, E. and Ciuffreda, A. (2005), "A unified formulation to assess theories of multilayered plates for various bending problems", Compos. Struct., 69(3), 271-293. https://doi.org/10.1016/j.compstruct.2004.07.003
  23. Chen, C.S., Liu, F.H. and Chen, W.R. (2017), "Vibration and stability of initially stressed sandwich plates with FGM face sheets in thermal environments", Steel Compos. Struct., 23(3), 251-261. https://doi.org/10.12989/scs.2017.23.3.251
  24. Cheng, Z.Q. and Batra, R.C. (2000), "Exact correspondence between eigenvalues of membranes and functionally graded simply supported polygonal plates", J. Sound Vibr., 229(4), 879-895. https://doi.org/10.1006/jsvi.1999.2525
  25. Cunedioglu, Y. (2015), "Free vibration analysis of edge cracked symmetric functionally graded sandwich beams", Struct. Eng. Mech., 56(6), 1003-1020. https://doi.org/10.12989/sem.2015.56.6.1003
  26. Das, M., Barut, A., Madenci, E. and Ambur, D.R. (2006), "A triangular plate element for thermo-elastic analysis of sandwich panels with a functionally graded core", Int. J. Numer. Meth. Eng., 68(9), 940-966. https://doi.org/10.1002/nme.1724
  27. Dozio, L. (2013), "Natural frequencies of sandwich plates with FGM core via variable-kinematic 2-D Ritz models", Compos. Struct., 96, 561-568. https://doi.org/10.1016/j.compstruct.2012.08.016
  28. Fard, K.M. (2014), "Higher order free vibration of sandwich curved beams with a functionally graded core", Struct. Eng. Mech., 49(5), 537-554. https://doi.org/10.12989/sem.2014.49.5.537
  29. Ferreira, A.J.M., Castro L.M.S. and Bertoluzza, S. (2003), "A high order collocation method for the static and vibration analysis of composite plates using a first-order theory", Compos. Struct., 34, 627-636.
  30. Houari, M.S.A., Tounsi, A. and Anwer, B. (2013), "Thermoelastic bending analysis of functionally graded sandwich plates using a new higher order shear and normal deformation theory", Int. J. Mech. Sci., 76, 102-111. https://doi.org/10.1016/j.ijmecsci.2013.09.004
  31. Karama, M., Afaq, K.S. and Mistou, S. (2003), "Mechanical behavior of laminated composite beam by the new multi-layered laminated composite structures model with transverse shear stress continuity", Int. J. Sol. Struct., 40(6), 1525-1546. https://doi.org/10.1016/S0020-7683(02)00647-9
  32. Kashtalyan, M. and Menshykova, M. (2009), "Three-dimensional elasticity solution for sandwich panels with a functionally graded core", Compos. Struct., 87(1), 36-43. https://doi.org/10.1016/j.compstruct.2007.12.003
  33. Kirugulige, M.S., Kitey, R. and Tippur, H.V. (2005), "Dynamic fracture behavior of model sandwich structures with functionally graded core: A feasibility study", Compos. Sci. Technol., 65(7), 1052-1068. https://doi.org/10.1016/j.compscitech.2004.10.029
  34. Li, D., Deng, Z., Xiao, H. and Zhu, L. (2018), "Thermomechanical bending analysis of functionally graded sandwich plates with both functionally graded face sheets and functionally graded cores", Mech. Adv. Mater. Struct., 25(3), 179-191. https://doi.org/10.1080/15376494.2016.1255814
  35. Li, Q., Lu, V. and Kou, K. (2008), "Three-dimensional vibration analysis of functionally graded material sandwich plates", J. Sound Vibr., 311(1-2), 498-515. https://doi.org/10.1016/j.jsv.2007.09.018
  36. Meksi, R., Benyoucef, S., Mahmoudi, A., Tounsi, A., Adda Bedia, E.A. and Mahmoud, S.R. (2017), "An analytical solution for bending, buckling and vibration responses of FGM sandwich plates", J. Sandw. Struct. Mater., 1099636217698443.
  37. Meziane, M.A.A., Abdelaziz, H.H. and Tounsi, A. (2014), "An efficient and simple refined theory for buckling and free vibration of exponentially graded sandwich plates under various boundary conditions", J. Sandw. Struct. Mater., 16(3), 293-318. https://doi.org/10.1177/1099636214526852
  38. Natarajan, S. and Manickam, G. (2012), "Bending and vibration of functionally graded material sandwich plates using an accurate theory", Fin. Elem. Anal. Des., 57, 32-42. https://doi.org/10.1016/j.finel.2012.03.006
  39. Radwan, A.F. (2017), "Effects of non-linear hygrothermal conditions on the buckling of FG sandwich plates resting on elastic foundations using a hyperbolic shear deformation theory", J. Sandw. Struct. Mater., 1099636217693557.
  40. Reddy, J.N. (1984), "A simple higher-order theory for laminated composite plates", J. Appl. Mech., 51(4), 745-752. https://doi.org/10.1115/1.3167719
  41. Reissner, E. (1945), "The effect of transverse shear deformation on the bending of elastic plates", J. Appl. Mech. Trans., 12, 69-77.
  42. Shimpi, R.P. (2002), "Refined plate theory and its variants", AIAA J., 40(1), 137-146. https://doi.org/10.2514/2.1622
  43. Sobhy, M. (2013), "Buckling and free vibration of exponentially graded sandwich plates resting on elastic foundations under various boundary conditions", Compos. Struct., 99, 76-87. https://doi.org/10.1016/j.compstruct.2012.11.018
  44. Sobhy, M. (2016), "An accurate shear deformation theory for vibration and buckling of FGM sandwich plates in hygrothermal environment", Int. J. Mech. Sci., 110, 62-77. https://doi.org/10.1016/j.ijmecsci.2016.03.003
  45. Sobhy, M. (2017), "Hygro-thermo-mechanical vibration and buckling of exponentially graded nanoplates resting on elastic foundations via nonlocal elasticity theory", Struct. Eng. Mech., 63(3), 401-415. https://doi.org/10.12989/SEM.2017.63.3.401
  46. Sobhy, M. and Radwan, A.F. (2017), "A new quasi 3D nonlocal plate theory for vibration and buckling of FGM nanoplates", Int. J. Appl. Mech., 9(1), 1750008. https://doi.org/10.1142/S1758825117500089
  47. Sofiyev, A.H. (2014), "The vibration and buckling of sandwich cylindrical shells covered by different coatings subjected to the hydrostatic pressure", Compos. Struct., 117, 124-134. https://doi.org/10.1016/j.compstruct.2014.06.025
  48. Soldatos, K.P. (1992), "A transverse shear deformation theory for homogeneous monoclinic plates", Acta Mech., 94(3-4), 195-220. https://doi.org/10.1007/BF01176650
  49. Thai, H.T. and Vo, T.P. (2013), "A new sinusoidal shear deformation theory for bending, buckling, and vibration of functionally graded plates", Appl. Math. Model., 37(5), 3269-81. https://doi.org/10.1016/j.apm.2012.08.008
  50. Tounsi, A., Houari, M.S.A. and Benyoucef, S. (2013), "A refined trigonometric shear deformation theory for thermoelastic bending of functionally graded sandwich plates", Aerosp. Sci. Technol., 24(1), 209-20. https://doi.org/10.1016/j.ast.2011.11.009
  51. Tounsi, A., Houari, M.S.A. and Bessaim, A. (2016), "A new 3-unknowns non-polynomial plate theory for buckling and vibration of functionally graded sandwich plate", Struct. Eng. Mech., 60(4), 547-565. https://doi.org/10.12989/sem.2016.60.4.547
  52. Touratier, M. (1991), "An efficient standard plate theory", Int. J. Eng. Sci., 29(8), 901-916. https://doi.org/10.1016/0020-7225(91)90165-Y
  53. Zenkour, A.M. (2004), "Thermal effects on the bending response of fiber-reinforced viscoelastic composite plates using a sinusoidal shear deformation theory", Acta Mech., 171(3-4), 171-187. https://doi.org/10.1007/s00707-004-0145-7
  54. Zenkour, A.M. (2005), "A comprehensive analysis of functionally graded sandwich plates: Part 1, deflection and stresses, part 2-buckling and free vibration", Int. J. Sol. Struct., 42(18-19), 5243-5258. https://doi.org/10.1016/j.ijsolstr.2005.02.016
  55. Zenkour, A.M. (2007), "Elastic deformation of the rotating functionally graded annular disk with rigid casing", J. Mater. Sci., 42, 9717-9724. https://doi.org/10.1007/s10853-007-1946-6
  56. Zenkour, A.M. (2009a), "The effect of transverse shear and normal deformations on the thermomechanical bending of functionally graded sandwich plates", Int. J. Appl. Mech., 1(4), 667-707. https://doi.org/10.1142/S1758825109000368
  57. Zenkour, A.M. (2009b), "The refined sinusoidal theory for FGM plates on elastic foundations", Int. J. Mech. Sci., 51(11-12), 869-880 https://doi.org/10.1016/j.ijmecsci.2009.09.026
  58. Zenkour, A.M. and Alghamdi, N.A. (2008), "Thermoelastic bending analysis of functionally graded sandwich plates", J. Mater. Sci., 43(8), 2574-2589 https://doi.org/10.1007/s10853-008-2476-6
  59. Zenkour, A.M. and Arefi, M. (2017), "Nonlocal transient electrothermomechanical vibration and bending analysis of a functionally graded piezoelectric single-layered nanosheet rest on visco-Pasternak foundation", J. Therm. Stress., 40(2), 167-184. https://doi.org/10.1080/01495739.2016.1229146
  60. Zenkour, A.M. and Sobhy, M. (2012), "Elastic foundation analysis of uniformly loaded functionally graded viscoelastic sandwich plates", J. Mech., 28(3), 439-452. https://doi.org/10.1017/jmech.2012.53
  61. Zenkour, A.M., Allam, M.N.M. and Sobhy, M. (2010), "Bending analysis of FG viscoelastic sandwich beams with elastic cores resting on Pasternak's elastic foundations", Acta Mech., 212(3-4), 233-252. https://doi.org/10.1007/s00707-009-0252-6

피인용 문헌

  1. The Nonlocal Strain Gradient Theory for Hygrothermo-Electromagnetic Effects on Buckling, Vibration and Wave Propagation in Piezoelectromagnetic Nanoplates vol.11, pp.7, 2018, https://doi.org/10.1142/s1758825119500674
  2. Size-Dependent Hygro-Thermal Buckling of Porous FGM Sandwich Microplates and Microbeams Using a Novel Four-Variable Shear Deformation Theory vol.12, pp.2, 2020, https://doi.org/10.1142/s1758825120500179