DOI QR코드

DOI QR Code

Process Design and Experimental Verification of Airbag Inflator Cap Forming

에어백 인플레이터 캡 성형 공정 개발 및 검증

  • Received : 2018.03.06
  • Accepted : 2018.07.12
  • Published : 2018.08.01

Abstract

An airbag is an essential automotive component used in all kinds of vehicles such as an internal combustion engine and an electric motor vehicle and is used to minimize the damage of an occupant in the event of an accident. Airbag-related parts are being monopolized by a small number of foreign companies around the world. In this situation, it is necessary to develop and research the airbag-related part molding technology for expansion of the domestic airbag-related market and corporate export. As a part of this research, we have developed a mold for airbag inflator cap. The development consists of three steps which are the design of components, analysis of the design and verification of it. In the case of the design, the transfer type mold was designed for the multi-cylindrical shaped feature. Analysis was then conducted on the design. By examining the results of analysis, changing features and numbers of punches and dies were added in the analysis and repeatedly analyzed. After the addition, proper dimensions from the analysis were achieved, and prototypes were practically produced and verified. In the case of prototype verification, Pressurizing Burst Test was conducted on the existing products and the prototype. By comparing the results of the test, the possibility of replacing the existing product of the airbag inflator cap is presented in this paper.

Keywords

References

  1. J. H. Jun, S. W. Namkung, 2016, Technical Trends for TAKATA Airbag Recall, Auto. J, Vol. 38, No. 10, pp. 52-54.
  2. D. H. Won, 2016, Takata Airbag Situation and Automobile Industry, http://news.kotra.or.kr/user/globalAllBbs/kotranews/album/2/globalBbsDataAllView.do?dataIdx=149671
  3. S. K. Choi, J. S. Park, E. S. Lee, 2011, A Study on the Burst Pressure Analysis of Rupture Discs for Airbag Inflator, KSAE Fall Conf 2011, pp. 2055-2061.
  4. H. M. Oh, W. C. Lim, J. W. Lee, Y. W. Yoon, 2011, A Study of the Rupture Disc for Curtain Airbag Inflator, KSAE Fall Conf 2011, pp. 2051-2054.
  5. S. B. Kim, S. H. Kim, 2015, Fabrication and Thermal Ignition of Nanoenergetic Composite Powders for Airbag Inflator, KSPE Spring Conf 2015, pp. 245-247.
  6. J. S. Lim, N. Y. Yoon, Y. S. Bang, 2016, Study on improvement of fidelity of CAE model for airbag misuse test with object rating method, KSAE Spring Conf 2016, pp. 838-843.
  7. I. S. Park, K. W. Yun, K. J. Park, H. J. Kim, 2014, An Experimental Study on the Safety Performance of the Rear Safety Guard with Air Bag for Truck, Trans. KSAE, Vol. 22, No. 4, pp. 10-19. https://doi.org/10.7467/KSAE.2014.22.4.010
  8. T. W. Ku, H. Y. Kim, W. J. Song, B. S. Kang, 2008, Process Design and Finite Element Analysis of Rectangular Cup used for Ni-MH Battery with High Aspect Ratio, Trans. Mater. Process, Vol. 17, No. 3, pp. 170-181. https://doi.org/10.5228/KSPP.2008.17.3.170
  9. J. W. Park, T. W. Ku, B. S. Kang, 2013, Numerical Simulation for a Multi-Stage Deep Drawing of Anisotropic SUS409L Sheet into a Rectangular Cup, Trans. Mater. Process, Vol. 22, No. 3, pp. 133-142. https://doi.org/10.5228/KSTP.2013.22.3.133
  10. USCAR24 Inflator Technical Requirements and Validation, SAE Int, 2004
  11. B. S. Kang, T. W. Ku, 2014, Process Modification and Numerical Simulation for an Outer Race of a CV Joint using Multi-Stage Cold Forging, Trans. Mater. Process, Vol. 23, No.4, pp. 211-220. https://doi.org/10.5228/KSTP.2014.23.4.211
  12. T. W. Ku, J. W. Park, S. C. Heo, B. S. Kang, 2010, Experimental Study on Non-Axisymmetric Rectangular Cup using Multi-Stage Deep Drawing Process, Trans. Mater. Process, Vol. 19, No. 4, pp. 253-262. https://doi.org/10.5228/KSPP.2010.19.4.253