DOI QR코드

DOI QR Code

Effective numerical approach to assess low-cycle fatigue behavior of pipe elbows

  • Jang, Heung Woon (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology (KAIST)) ;
  • Hahm, Daegi (Risk and Environmental Safety Research Division, Korea Atomic Energy Research Institute (KAERI)) ;
  • Jung, Jae-Wook (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology (KAIST)) ;
  • Hong, Jung-Wuk (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology (KAIST))
  • 투고 : 2017.09.07
  • 심사 : 2018.01.30
  • 발행 : 2018.06.25

초록

We developed numerical models to efficiently simulate the low-cycle fatigue behavior of a pipe elbow. To verify the model, in-plane cyclic bending tests of pipe elbow specimens were conducted, and a through crack occurred in the vicinity of the crown. Numerical models based on the erosion method and tie-break method are developed, and the numerical results are compared with experimental results. The calculated results of both models are in good agreement with experimental results, and the model using the tie-break method possesses two times faster calculation speed. Therefore, the numerical model based on the tie-break method would be beneficial to evaluate the strength of piping systems under seismic loadings.

키워드

참고문헌

  1. KHNP, Probabilistic Safety Assessment of Uljin No. 5 and No. 6, 2002.
  2. B.G. Jeon, H.S. Choi, D.G. Hahm, N.S. Kim, Seismic fragility evaluation of base isolated nuclear power plant piping system, in: Int. Conf. Thin-Walled Struct. Busan, 2014.
  3. K. Takahashi, S. Tsunoi, T. Hara, T. Ueno, A. Mikami, H. Takada, K. Ando, M. Shiratori, Experimental study of low-cycle fatigue of pipe elbows with local wall thinning and life estimation using finite element analysis, Int. J. Press. Vessel Pip. 87 (2010) 211-219, https://doi.org/10.1016/j.ijpvp.2010.03.022.
  4. K. Takahashi, S. Watanabe, K. Ando, Y. Urabe, A. Hidaka, M. Hisatsune, K. Miyazaki, Low cycle fatigue behaviors of elbow pipe with local wall thinning, Nucl. Eng. Des. 239 (2009) 2719-2727, https://doi.org/10.1016/j.nucengdes.2009.09.011.
  5. S.A. Karamanos, E. Giakoumatos, A.M. Gresnigt, Nonlinear response and failure of steel elbows under in-plane bending and pressure, J. Press. Vessel Technol. 125 (2003) 393, https://doi.org/10.1115/1.1613949.
  6. S.A. Karamanos, D. Tsouvalas, A.M. Gresnigt, Ultimate bending capacity and buckling of pressurized 90 deg steel elbows, J. Press. Vessel Technol 128 (2006) 348, https://doi.org/10.1115/1.2217967.
  7. H. Mourad, M.Y.A. Younan, Nonlinear analysis of pipe bends subjected to outof-plane moment loading and internal, ASME 123 (2001) 253-258, https://doi.org/10.1115/1.1425807.
  8. J. Chattopadhyay, D.K. Nathani, B.K. Dutta, H.S. Kushwaha, Closed-form collapse moment equations of elbows under combined internal pressure and in-plane bending moment, J. Press. Vessel Technol. 122 (2000) 431-436. https://doi.org/10.1115/1.1285988
  9. C. Balan, D. Redekop, The effect of bi-directional loading on fatigue assessment of pressurized piping elbows with local thinned areas, Int. J. Press. Vessel. Pip, 82 (2005) 235-242, https://doi.org/10.1016/j.ijpvp.2004.07.020.
  10. G. Degrassil, C. Hofmayer, A. Murphy, K. Suzuki, Y. Namita, BNL Nonlinear Pretest Seismic Analysis for the NUPEC Ultimate Strength Piping Test Program, 2003, pp. 1-8.
  11. S.K. Gupta, S. Goyal, V. Bhasin, K.K. Vaze, A.K. Ghosh, H.S. Kushwaha, Ratcheting-fatigue failure of pressurized elbows made of carbon steel ERT-2, in: 20th Int. Conf. Struct. Mech. React. Technol. Espoo, Finland, 2009, pp. 1-10.
  12. D. Hahm, M.k. Kim, Ultimate failure criteria evaluation of elbow components by using dynamic cyclic loading tests, in: Trans. Korean Nucl. Soc. Autumn Meet., Gyeongju, Korea, 2015.
  13. D. Hahm, M.K. Kim, Ultimate failure criteria evaluation of elbow pipe components in seismically isolated NPPs, in: Proc. ASME 2016 Press. Vessel. Pip. Conf., Vancouver, British Columbia, Canada, 2016.
  14. K.-J. Bathe, Finite Element Procedures, 2006.
  15. J.O. Hallquist, LS-DYNA, Keyword User's Manual. Version 971, Livermore Software Technology Corporation, Livermore, 2007.
  16. A. Ochsner, Holm Altenbach, Experimental and Numerical Investigation of Advanced Materials and Structures, 2000, https://doi.org/10.2514/6.2009-5462.

피인용 문헌

  1. 모멘트-변형각의 관계를 이용한 SCH80 3인치 강재배관엘보의 한계상태 평가 vol.24, pp.3, 2020, https://doi.org/10.11112/jksmi.2020.24.3.122
  2. Experimental and Numerical Study of Low-Velocity Impact and Tensile after Impact for CFRP Laminates Single-Lap Joints Adhesively Bonded Structure vol.14, pp.4, 2021, https://doi.org/10.3390/ma14041016
  3. Finite Element Analysis-Based Damage Metric for Airtightness Performance Evaluation of Concrete Tube Structures vol.25, pp.4, 2018, https://doi.org/10.1007/s12205-021-1007-8
  4. Experimental study on the floor responses of a base-isolated frame structure via shaking table tests vol.253, pp.None, 2018, https://doi.org/10.1016/j.engstruct.2021.113763