참고문헌
- K.S. Lee, I.Y. Kim, W. Lee, Y.S. Yoon, Effect of Zr thin film on Zr foil as a FCCI barrier between lanthanide (La-Ce) and clad material, Met. Mater. Int. 21 (2015) 498-503. https://doi.org/10.1007/s12540-015-4433-7
- H.J. Ryu, B.O. Lee, S.J. Oh, J.H. Kim, C.B. Lee, Performance of FCCI barrier foils for U-Zr-X metallic fuel, J. Nucl. Mater. 392 (2009) 206-212. https://doi.org/10.1016/j.jnucmat.2009.03.011
- D.W. Lim, D.J. Park, J.Y. Park, H. Jang, J.S. Yoo, Y.K. Mok, J.M. Suh, K.M. Lee, Effect of pre-hydriding on the burst behavior of the Zirconium cladding under loss-of-coolant accident condition, Korean J. Met. Mater. 52 (2014) 493. https://doi.org/10.3365/KJMM.2014.52.7.493
- T. Ogata, M. Akabori, A. Itoh, Diffusion of Cerium in UraniumeZirconium solid solutions, Mater. Trans. 44 (2003) 47. https://doi.org/10.2320/matertrans.44.47
- Y.I. Jung, S.H. Kim, H.G. Kim, J.Y. Park, Y.H. Koo, Effect of preceramic and Zr coating on impregnation behaviors of SiC ceramic composite, Met. Mater. Int. 21 (2015) 173. https://doi.org/10.1007/s12540-015-1021-9
- D.J. Kim, B.H. Mun, H.P. Kim, S.S. Hwang, Investigation of oxide property on alloy 600 with the immersion time in a high-temperature leaded alkaline solution, Met. Mater. Int. 20 (2014) 1059-1065. https://doi.org/10.1007/s12540-014-6009-3
- J.H. Kim, H.J. Ryu, J.H. Baek, S.J. Oh, B.O. Lee, C.B. Lee, Y.S. Yoon, Performance of a diffusion barrier under a fueleclad chemical interaction (FCCI), J. Nucl. Mater. 394 (2009) 144-150. https://doi.org/10.1016/j.jnucmat.2009.08.018
- G.W. Egeland, R.D. Mariani, T. Hartmann, D.L. Porter, S.L. Hayes, J.R. Kennedy, Reduction of FCCI effects in lanthanideeiron diffusion couples by doping with palladium, J. Nucl. Mater. 440 (2013) 178-192. https://doi.org/10.1016/j.jnucmat.2013.04.060
- J.H. Kim, J.H. Baek, B.O. Lee, C.B. Lee, Y.S. Yoon, Reaction between a rare earth element and 9Cr-2W steel, Met. Mater. Int. 17 (2011) 535-540. https://doi.org/10.1007/s12540-011-0801-0
- D.D. Keiser, M.C. Petri, Annual Conference of the Canadian Nuclear Society, 1994. CONF 940631-1, Toronto, Canada.
- A.B. Cohen, Joint American Nuclear Society/European Nuclear Society International meeting On fifty years of controlled nuclear chain reaction, 1992. CONF-921102-29, Chicago, USA.
- S.W. Yang, H.J. Ryu, J.H. Kim, B.O. Lee, C.B. Lee, FCCI barrier performance of electroplated Cr for metallic fuel, J. Nucl. Mater. 401 (2010) 98-103. https://doi.org/10.1016/j.jnucmat.2010.04.004
- S.H. Jee, K.S. Lee, J.H. Kim, Y.S. Yoon, Improvement of the zirconium diffusion barrier between lanthanide (LaeCe) and a clad material by hydrothermal crystallization, Curr. Appl. Phys. 13 (2013) 1995-2000. https://doi.org/10.1016/j.cap.2013.08.005
- L. Cunha, M. Andritschky, L. Rebouta, K. Pischow, Corrosion of CrN and TiAlN coatings in chloride-containing atmospheres, Surf. Coat. Technol. 116-119 (1999) 1152-1160. https://doi.org/10.1016/S0257-8972(99)00270-4
- K.W. Weng, T.N. Lin, D.Y. Wang, Tribological property enhancement of CrN films by metal vapor vacuum arc implantation of Vanadium and Carbon ions, Thin Solid Films 516 (2008) 1012-1019. https://doi.org/10.1016/j.tsf.2007.06.162
- F. Zhou, K. Chen, M. Wang, X. Xu, H. Meng, M. Yu, Z. Dai, Friction and wear properties of CrN coatings sliding against Si3N4 balls in water and air, Wear 265 (2008) 1029-1037. https://doi.org/10.1016/j.wear.2008.02.010
-
T. Polcar, N.M.G. Parreira, R. Novak, Friction and wear behaviour of CrN coating at temperatures up to
$500^{\circ}C$ , Surf. Coat. Technol. 201 (2007) 5228-5235. https://doi.org/10.1016/j.surfcoat.2006.07.121 - P.H. Mayrhofer, H. Willmann, C. Mitterer, Oxidation kinetics of sputtered CreN hard coatings, Surf. Coat. Technol. 146-147 (2001) 222-228. https://doi.org/10.1016/S0257-8972(01)01471-2
- L. Cunha, M. Andritschkya, K. Pischowb, Z. Wangb, Microstructure of CrN coatings produced by PVD techniques, Thin Solid Films 355-356 (1999) 465-471. https://doi.org/10.1016/S0040-6090(99)00552-0
- M.C. Kang, S.K. Je, K.H. Kim, B.S. Shin, D.H. Kwon, J.S. Kim, Cutting performance of CrN-based coatings tool deposited by hybrid coating method for micro drilling applications, Surf. Coat. Technol. 202 (2008) 5629-5632. https://doi.org/10.1016/j.surfcoat.2008.06.130
- S.H. Shin, M.W. Kim, M.C. Kang, K.H. Kim, D.H. Kwon, J.S. Kim, Cutting performance of CrN and Cr-Si-N coated end-mill deposited by hybrid coating system for ultra-high speed micro machining, Surf. Coat. Technol. 202 (2008) 5613-5616. https://doi.org/10.1016/j.surfcoat.2008.06.128
- J.Y. Lee, D.T. Ngo, C.J. Park, Ge-Al Multilayer thin film as an anode for Li-ion batteries, J. Korean Ceram. Soc. 54 (2017) 249-256. https://doi.org/10.4191/kcers.2017.54.3.11
- S.Y. Chun, Properties of VN Coatings deposited by ICP assisted sputtering: Effect of ICP power, J. Korean Ceram. Soc. 54 (2017) 38-42. https://doi.org/10.4191/kcers.2017.54.1.05
- S.Y. Chun, H.H. Im, Crystal structure, microstructure and mechanical properties of NbN Coatings deposited by asymmetric bipolar pulsed DC sputtering, J. Korean Ceram. Soc. 54 (2017) 33-37. https://doi.org/10.4191/kcers.2017.54.1.02
- D.D. Keiser, M.C. Petri, Interdiffusion behavior in U-Pu-Zr fuel versus stainless steel couples, J. Nucl. Mater. 240 (1996) 51-61. https://doi.org/10.1016/S0022-3115(96)00476-X
- T. Ogata, M. Kurata, K. Nakamura, A. Itoh, M. Akabori, reactions between U-Zr alloys and Fe at 923 K, J. Nucl. Mater. 250 (1997) 171-175. https://doi.org/10.1016/S0022-3115(97)00262-6
- D.D. Keiser, M.A. Dayananda, Interdiffusion between U-Zr fuel and selected Fe-Ni-Cr alloys, J. Nucl. Mater. 200 (1993) 229-243. https://doi.org/10.1016/0022-3115(93)90334-U
- K. Nakamura, T. Ogata, M. Kurata, A. Itoh, M. Akabori, Reactions of UeZr alloy with Fe and Fe-Cr alloy, J. Nucl. Mater. 275 (1999) 246-254. https://doi.org/10.1016/S0022-3115(99)00227-5
- R.L. Klueh, A.T. Nelson, Ferritic/martensitic steels for next-generation reactors, J. Nucl. Mater. 371 (2007) 37-52. https://doi.org/10.1016/j.jnucmat.2007.05.005
- C.B. Lee, J.S. Cheon, S.H. Kim, J.-Y. Park, H.-K. Joo, Metal Fuel Development and verification for prototype generation IV sodium-cooled fast reactor, Nucl. Eng. Technol. 48 (2016) 1096-1108. https://doi.org/10.1016/j.net.2016.08.001
- J. Yoo, J. Chang, J.-Y. Lim, J.-S. Cheon, T.-H. Lee, S.K. Kim, K.L. Lee, H.-K. Joo, Overall system description and safety characteristics of prototype Gen IV sodium cooled fast reactor in Korea, Nucl. Eng. Technol. 48 (2016) 1059-1070. https://doi.org/10.1016/j.net.2016.08.004
- K. Dyrda, M. Sayer, Critical loads and effective frictional force measurements in the industrial scratch testing of TiN on M2 tool steel, Thin Solid Films 355-356 (1999) 277-283. https://doi.org/10.1016/S0040-6090(99)00450-2
피인용 문헌
- Effects of Cathode Voltage Pulse Width in High Power Impulse Magnetron Sputtering on the Deposited Chromium Thin Films vol.10, pp.6, 2018, https://doi.org/10.3390/coatings10060542
- Synthesis of plasma-nitrided Cr coatings on HT9 steel for advanced chemical barrier property in a nuclear cladding application vol.579, pp.None, 2018, https://doi.org/10.1016/j.apsusc.2021.152133