참고문헌
- B. Dunn, H. Kamath, and J. M. Tarascon, "Electrical Energy Storage for the Grid: a Battery of Choices," Science, 334 [6058] 928-35 (2011). https://doi.org/10.1126/science.1212741
- M. Armand and J. M. Tarascon, "Building Better Batteries," Nature, 451 [7179] 652-57 (2008). https://doi.org/10.1038/451652a
- G. E. Blomgren, "The Development and Future of Lithium Ion Batteries," J. Electrochem. Soc., 164 [1] A5019-25 (2017). https://doi.org/10.1149/2.0251701jes
- M. Lazzari and B. Scrosati, "Cyclable Lithium Organic Electrolyte Cell Based on 2 Intercalation Electrodes," J. Electrochem. Soc., 127 [3] 773-74 (1980). https://doi.org/10.1149/1.2129753
- D. Larcher and J. M. Tarascon, "Towards Greener and More Sustainable Batteries for Electrical Energy Storage," Nat. Chem., 7 [1] 19-29 (2015). https://doi.org/10.1038/nchem.2085
- B. Swain, "Cost Effective Recovery of Lithium from Lithium Ion Battery by Reverse Osmosis and Precipitation: a Perspective," J. Chem. Technol. Biotechnol., 93 [2] 311-19 (2018). https://doi.org/10.1002/jctb.5332
- S. W. Kim, D. H. Seo, X. H. Ma, G. Ceder, and K. Kang, "Electrode Materials for Rechargeable Sodium-Ion Batteries: Potential Alternatives to Current Lithium-Ion Batteries," Adv. Energy Mater., 2 [7] 710-21 (2012). https://doi.org/10.1002/aenm.201200026
- N. Yabuuchi, K. Kubota, M. Dahbi, and S. Komaba, "Research Development on Sodium-Ion Batteries," Chem. Rev., 114 [23] 11636-82 (2014). https://doi.org/10.1021/cr500192f
- V. Palomares, P. Serras, I. Villaluenga, K. B. Hueso, J. Carretero-Gonzalez, and T. Rojo, "Na-Ion Batteries, Recent Advances and Present Challenges to Become Low Cost Energy Storage Systems," Energy Environ. Sci., 5 [3] 5884-901 (2012). https://doi.org/10.1039/c2ee02781j
-
P. R. Kumar, Y. H. Jung, S. A. Ahad, and D. K. Kim, "A High Rate and Stable Electrode Consisting of a
$Na_3V_2O_{2X}(PO_4)_2F_{3-2X}-rGO$ Composite with a Cellulose Binder for Sodium-Ion Batteries," RSC Adv., 7 [35] 21820-26 (2017). https://doi.org/10.1039/C7RA01047H -
P. R. Kumar, Y. H. Jung, and D. K. Kim, "Influence of Carbon Polymorphism towards Improved Sodium Storage Properties of
$Na_3V_2O_{2x}(PO_4)_2F_{3-2x}$ ," J. Solid State Electrochem., 21 [1] 223-32 (2017). https://doi.org/10.1007/s10008-016-3365-6 - Y. H. Jung, A. S. Christiansen, R. E. Johnsen, P. Norby, and D. K. Kim, "In Situ X-Ray Diffraction Studies on Structural Changes of a P2 Layered Material during Electrochemical Desodiation/Sodiation," Adv. Funct. Mater., 25 [21] 3227-37 (2015). https://doi.org/10.1002/adfm.201500469
-
J. Song, J. Yang, M. H. Alfaruqi, W. Park, S. Park, S. Kim, J. Jo, and J. Kim, "Pyro-Synthesis of
$Na_2FeP_2O_7$ Nano-plates as Cathode for Sodium-ion Batteries with Long Cycle Stability," J. Korean Ceram. Soc., 53 [4] 406-10 (2016). https://doi.org/10.4191/kcers.2016.53.4.406 - J. Y. Hwang, S. T. Myung, and Y. K. Sun, "Sodium-Ion Batteries: Present and Future," Chem. Soc. Rev., 46 [12] 3529-614 (2017). https://doi.org/10.1039/C6CS00776G
- Y. Guo, Y. Wei, H. Li, and T. Zhai, "Layer Structured Materials for Advanced Energy Storage and Conversion," Small, 13 [45] 1701649 (2017). https://doi.org/10.1002/smll.201701649
- H. Y. Kang, Y. C. Liu, K. Z. Cao, Y. Zhao, L. F. Jiao, Y. J. Wang, and H. T. Yuan, "Update on Anode Materials for Na-Ion Batteries," J. Mater. Chem. A, 3 [35] 17899-913 (2015). https://doi.org/10.1039/C5TA03181H
- Y. Wen, K. He, Y. J. Zhu, F. D. Han, Y. H. Xu, I. Matsuda, Y. Ishii, J. Cumings, and C. S. Wang, "Expanded Graphite as Superior Anode for Sodium-Ion Batteries," Nat. Commun., 5 5033 (2014). https://doi.org/10.1038/ncomms6033
- E. Buiel, and J. R. Dahn, "Li-Insertion in Hard Carbon Anode Materials for Li-Ion Batteries," Electrochim. Acta, 45 [1-2] 121-30 (1999). https://doi.org/10.1016/S0013-4686(99)00198-X
- V. L. Chevrier and G. Ceder, "Challenges for Na-Ion Negative Electrodes," J. Electrochem. Soc., 158 [9] A1011-14 (2011). https://doi.org/10.1149/1.3607983
- W. Luo, F. Shen, C. Bommier, H. Zhu, X. Ji, and L. Hu, "Na-Ion Battery Anodes: Materials and Electrochemistry," Acc. Chem. Res., 49 [2] 231-40 (2016). https://doi.org/10.1021/acs.accounts.5b00482
- Y. Kim, K. H. Ha, S. M. Oh, and K. T. Lee, "High-Capacity Anode Materials for Sodium-Ion Batteries," Chem. - Eur. J., 20 [38] 11980-92 (2014). https://doi.org/10.1002/chem.201402511
- S. Komaba, Y. Matsuura, T. Ishikawa, N. Yabuuchi, W. Murata, and S. Kuze, "Redox Reaction of Sn-Polyacrylate Electrodes in Aprotic Na Cell," Electrochem. Commun., 21 65-8 (2012). https://doi.org/10.1016/j.elecom.2012.05.017
- J. W. Wang, X. H. Liu, S. X. Mao, and J. Y. Huang, "Microstructural Evolution of Tin Nanoparticles during In Situ Sodium Insertion and Extraction," Nano Lett., 12 [11] 5897-902 (2012). https://doi.org/10.1021/nl303305c
- S. A. Liu, J. K. Feng, X. F. Bian, Y. T. Qian, J. Liu, and H. Xu, "Nanoporous Germanium as High-Capacity Lithium-Ion Battery Anode," Nano Energy, 13 651-57 (2015). https://doi.org/10.1016/j.nanoen.2015.03.039
- X. W. Li, Z. B. Yang, Y. J. Fu, L. Qiao, D. Li, H. W. Yue, and D. Y. He, "Germanium Anode with Excellent Lithium Storage Performance in a Germanium/Lithium-Cobalt Oxide Lithium-Ion Battery," ACS Nano, 9 [2] 1858-67 (2015). https://doi.org/10.1021/nn506760p
- L. Baggetto, E. J. M. Hensen, and P. H. L. Notten, "In situ X-ray Absorption Spectroscopy of Germanium Evaporated Thin Film Electrodes," Electrochim. Acta, 55 [23] 7074-79 (2010). https://doi.org/10.1016/j.electacta.2010.06.087
- L. Baggetto and P. H. L. Notten, "Lithium-Ion (De)Insertion Reaction of Germanium Thin-Film Electrodes: An Electrochemical and In Situ XRD Study," J. Electrochem. Soc., 156 [3] A169-A75 (2009). https://doi.org/10.1149/1.3055984
- X. T. Lu, E. R. Adkins, Y. He, L. Zhong, L. L. Luo, S. X. Mao, C. M. Wang, and B. A. Korgel, "Germanium as a Sodium Ion Battery Material: In Situ TEM Reveals Fast Sodiation Kinetics with High Capacity," Chem. Mater., 28 [4] 1236-42 (2016). https://doi.org/10.1021/acs.chemmater.6b00200
- J. W. Wang, X. H. Liu, S. X. Mao, and J. Y. Huang, "Microstructural Evolution of Tin Nanoparticles during in situ Sodium Insertion and Extraction," Nano Lett., 12 [11] 5897-902 (2012). https://doi.org/10.1021/nl303305c
- F. Wan, J. Z. Guo, X. H. Zhang, J. P. Zhang, H. Z. Sun, Q. Y. Yan, D. X. Han, L. Niu, and X. L. Wu, "In Situ Binding Sb Nanospheres on Graphene via Oxygen Bonds as Superior Anode for Ultrafast Sodium-Ion Batteries," ACS Appl. Mater. Interfaces, 8 [12] 7790-99 (2016). https://doi.org/10.1021/acsami.5b12242
- X. L. Zhou, Y. R. Zhong, M. Yang, M. Hu, J. P. Wei, and Z. Zhou, "Sb Nanoparticles Decorated N-rich Carbon Nanosheets as Anode Materials for Sodium Ion Batteries with Superior Rate Capability and Long Cycling Stability," Chem. Commun., 50 [85] 12888-91 (2014). https://doi.org/10.1039/C4CC05989A
- L. Luo, H. Qiao, W. Z. Xu, D. W. Li, J. D. Zhu, C. Chen, Y. Lu, P. Zhu, X. W. Zhang, and Q. F. Wei, "Tin Nanoparticles Embedded in Ordered Mesoporous Carbon as High-Performance Anode for Sodium-Ion Batteries," J. Solid State Electrochem., 21 [5] 1385-95 (2017). https://doi.org/10.1007/s10008-016-3501-3
- Q. Q. Yang, J. Zhou, G. Q. Zhang, C. Guo, M. Li, Y. C. Zhu, and Y. T. Qian, "Sb Nanoparticles Uniformly Dispersed in 1-D N-doped Porous Carbon as Anodes for LiIon and Na-Ion Batteries," J. Mater. Chem. A, 5 [24] 12144-48 (2017). https://doi.org/10.1039/C7TA03060F
-
Y. X. Wang, Y. G. Lim, M. S. Park, S. L. Chou, J. H. Kim, H. K. Liu, S. X. Dou, and Y. J. Kim, "Ultrafine
$SnO_2$ Nanoparticle Loading onto Reduced Graphene Oxide as Anodes for Sodium-Ion Batteries with Superior Rate and Cycling Performances," J. Mater. Chem. A, 2 [2] 529-34 (2014). https://doi.org/10.1039/C3TA13592F -
H. W. Song, N. Li, H. Cui, and C. X. Wang, "Enhanced Capability and Cyclability of
$SnO_2$ -Graphene Oxide Hybrid Anode by Firmly Anchored$SnO_2$ Quantum Dots," J. Mater. Chem. A, 1 [26] 7558-62 (2013). https://doi.org/10.1039/c3ta11442b -
J. Patra, H. C. Chen, C. H. Yang, C. T. Hsieh, C. Y. Su, and J. K. Chang, "High Dispersion of 1-nm
$SnO_2$ Particles between Graphene Nanosheets Constructed Using Supercritical$CO_2$ Fluid for Sodium-Ion Battery Anodes," Nano Energy, 28 124-34 (2016). https://doi.org/10.1016/j.nanoen.2016.08.044 - R. S. Kalubarme, J. Y. Lee, and C. J. Park, "Carbon Encapsulated Tin Oxide Nanocomposites: An Efficient Anode for High Performance Sodium-Ion Batteries," ACS Appl. Mater. Interfaces, 7 [31] 17226-37 (2015). https://doi.org/10.1021/acsami.5b04178
- X. Xie, S. Chen, B. Sun, C. Wang, and G. Wang, "3D Networked Tin Oxide/Graphene Aerogel with a Hierarchically Porous Architecture for High-Rate Performance Sodium-Ion Batteries," ChemSusChem, 8 [17] 2948-55 (2015). https://doi.org/10.1002/cssc.201500149
-
Z. D. Huang, H. S. Hou, G. Q. Zou, J. Chen, Y. Zhang, H. X. Liao, S. M. Li, and X. B. Ji, "3D Porous Carbon Encapsulated
$SnO_2$ Nanocomposite for Ultrastable Sodium Ion Batteries," Electrochim. Acta, 214 156-64 (2016). https://doi.org/10.1016/j.electacta.2016.08.040 -
G. Z. Wang, J. M. Feng, L. Dong, X. F. Li, and D. J. Li, "
$SnO_2$ Particles Anchored on N-Doped Graphene Surface as Sodium-Ion Battery Anode with Enhanced Electrochemical Capability," Appl. Surf. Sci., 396 269-77 (2017). https://doi.org/10.1016/j.apsusc.2016.10.109 - H. S. Hou, M. J. Jing, Y. C. Yang, Y. Zhang, W. X. Song, X. M. Yang, J. Chen, Q. Y. Chen, and X. B. Ji, "Antimony Nanoparticles Anchored on Interconnected Carbon Nanofibers Networks as Advanced Anode Material for Sodium-Ion Batteries," J. Power Sources, 284 227-35 (2015). https://doi.org/10.1016/j.jpowsour.2015.03.043
-
D. H. Nam, K. S. Hong, S. J. Lim, M. J. Kim, and H. S. Kwon, "High-Performance
$Sb/Sb_2O_3$ Anode Materials Using a Polypyrrole Nanowire Network for Na-Ion Batteries," Small, 11 [24] 2885-92 (2015). https://doi.org/10.1002/smll.201500491 - K. S. Hong, D. H. Nam, S. J. Lim, D. Sohn, T. H. Kim, and H. Kwon, "Electrochemically Synthesized Sb/Sb2O3 Composites as High-Capacity Anode Materials Utilizing a Reversible Conversion Reaction for Na-Ion Batteries," ACS Appl. Mater. Interface, 7 [31] 17264-71 (2015). https://doi.org/10.1021/acsami.5b04225
- G. Z. Wang, J. M. Feng, L. Dong, X. F. Li, and D. J. Li, "Antimony (IV) Oxide Nanorods/Reduced Graphene Oxide as the Anode Material of Sodium-ion Batteries with Excellent Electrochemical Performance," Electrochim. Acta, 240 203-14 (2017). https://doi.org/10.1016/j.electacta.2017.04.088
-
J. Fei, Y. L. Cui, J. Y. Li, Z. W. Xu, J. Yang, R. Y. Wang, Y. Y. Cheng, and J. F. Hang, "A Flexible
$Sb_2O_3$ /Carbon Cloth Composite as a Free-Standing High Performance Anode for Sodium Ion Batteries," Chem. Commun., 53 [98] 13165-67 (2017). https://doi.org/10.1039/C7CC06945F -
M. J. Hu, Y. Z. Jiang, W. P. Sun, H. T. Wang, C. H. Jin, and M. Yan, "Reversible Conversion-Alloying of
$Sb_2O_3$ as a High-Capacity, High-Rate, and Durable Anode for Sodium Ion Batteries," ACS Appl. Mater. Interface, 6 [21] 19449-55 (2014). https://doi.org/10.1021/am505505m -
L. Zhao, H. L. Pan, Y. S. Hu, H. Li, and L. Q. Chen, "Spinel Lithium Titanate (
$Li_4Ti_5O_{12}$ ) as Novel Anode Material for Room-Temperature Sodium-Ion Battery," Chin. Phys. B, 21 [2] (2012). -
Y. Sun, L. Zhao, H. L. Pan, X. Lu, L. Gu, Y. S. Hu, H. Li, M. Armand, Y. Ikuhara, L.Q. Chen, and X. J. Huang, "Direct Atomic-Scale Confirmation of Three-Phase Storage Mechanism in
$Li_4Ti_5O_{12}$ Anodes for Room-Temperature Sodium-Ion Batteries," Nat. Commun., 4 2878 (2013). https://doi.org/10.1038/ncomms3878 -
P. Senguttuvan, G. Rousse, V. Seznec, J. M. Tarascon, and M. R. Palacin, "
$Na_2Ti_3O_7$ : Lowest Voltage Ever Reported Oxide Insertion Electrode for Sodium Ion Batteries," Chem. Mater., 23 [18] 4109-11 (2011). https://doi.org/10.1021/cm202076g - Y. S. Wang, X. Q. Yu, S. Y. Xu, J. M. Bai, R. J. Xiao, Y. S. Hu, H. Li, X. Q. Yang, L. Q. Chen, and X. J. Huang, "A Zero-Strain Layered Metal Oxide as the Negative Electrode for Long-Life Sodium-Ion Batteries," Nat. Commun., 4 [2365] 1-8 (2013).
-
D. B. S. H. Kim, C. Kim, and J. G. Lee, "Na-Ion Anode Based on
$Na(Li,Ti)O_2$ System: Effects of Mg Addition," J. Korean Ceram. Soc., 53 [3] 282-87 (2016). https://doi.org/10.4191/kcers.2016.53.3.282 -
A. Rudola, K. Saravanan, S. Devaraj, H. Gong, and P. Balaya, "
$Na_2Ti_6O_{13}$ : A Potential Anode for Grid-Storage Sodium-Ion Batteries," Chem. Commun., 49 [67] 7451-53 (2013). https://doi.org/10.1039/c3cc44381g - M. Shirpour, J. Cabana, and M. Doeff, "New Materials Based on a Layered Sodium Titanate for Dual Electrochemical Na and Li Intercalation Systems," Energy Environ. Sci., 6 [8] 2538-47 (2013). https://doi.org/10.1039/c3ee41037d
-
R. Alcantara, M. Jaraba, P. Lavela, and J. L. Tirado, "
$NiCo_2O_4$ Spinel: First Report on a Transition Metal Oxide for the Negative Electrode of Sodium-Ion Batteries," Chem. Mater., 14 [7] 2847-48 (2002). https://doi.org/10.1021/cm025556v - R. S. Kalubarme, A. I. Inamdar, D. S. Bhange, H. Im, S. W. Gosavi, and C. J. Park, "Nickel-Titanium Oxide as a Novel Anode Material for Rechargeable Sodium-Ion Batteries," J. Mater. Chem. A, 4 [44] 17419-30 (2016). https://doi.org/10.1039/C6TA07306A
-
S. Komaba, T. Mikumo, N. Yabuuchi, A. Ogata, H. Yoshida, and Y. Yamada, "Electrochemical Insertion of Li and Na Ions into Nanocrystalline
$Fe_3O_4$ and${\alpha}-Fe_2O_3$ for Rechargeable Batteries," J. Electrochem. Soc., 157 [1] A60-5 (2010). https://doi.org/10.1149/1.3254160 -
P. R. Kumar, Y. H. Jung, K. K. Bharathi, C. H. Lim, and D. K. Kim, "High Capacity and Low Cost Spinel
$Fe_3O_4$ for the Na-Ion Battery Negative Electrode Materials," Electrochim. Acta, 146 503-10 (2014). https://doi.org/10.1016/j.electacta.2014.09.081 - D. S. Li, D. Yan, X. J. Zhang, J. B. Li, T. Lu, and L. K. Pan, "Porous CuO/Reduced Graphene Oxide Composites Synthesized from Metal-Organic Frameworks as Anodes for High-Performance Sodium-Ion Batteries," J. Colloid Interface Sci., 497 350-58 (2017). https://doi.org/10.1016/j.jcis.2017.03.037
-
G. Longoni, M. Fiore, J. H. Kim, Y. H. Jung, D. K. Kim, C. M. Mari, and R. Ruffo, "
$Co_3O_4$ Negative Electrode Material for Rechargeable Sodium Ion Batteries: An Investigation of Conversion Reaction Mechanism and Morphology-Performances Correlations," J. Power Sources, 332 42-50 (2016). https://doi.org/10.1016/j.jpowsour.2016.09.094 -
S. Meng, D.L. Zhao, L. L. Wu, Z. W. Ding, X. W. Cheng, and T. Hu, "
$Fe_2O_3$ /Nitrogen-Doped Graphene Nanosheet Nanocomposites as Anode Materials for Sodium-Ion Batteries with Enhanced Electrochemical Performance," J. Alloys Compd., 737 130-35 (2018). https://doi.org/10.1016/j.jallcom.2017.12.077 -
M. M. Rahman, I. Sultana, Z. Q. Chen, M. Srikanth, L. H. Li, X. J. J. Dai, and Y. Chen, "Ex situ Electrochemical Sodiation/Desodiation Observation of
$Co_3O_4$ Anchored Carbon Nanotubes: A High Performance Sodium-Ion Battery Anode Produced by Pulsed Plasma in a Liquid," Nanoscale, 7 [30] 13088-95 (2015). https://doi.org/10.1039/C5NR03335G - X. J. Wang, Y. C. Liu, Y. J. Wang, and L. F. Jiao, "CuO Quantum Dots Embedded in Carbon Nanofibers as Binder-Free Anode for Sodium Ion Batteries with Enhanced Properties," Small, 12 [35] 4865-72 (2016). https://doi.org/10.1002/smll.201601474
-
S. M. Oh, S. T. Myung, C. S. Yoon, J. Lu, J. Hassoun, B. Scrosati, K. Amine, and Y. K. Sun, "Advanced
$Na[Ni_{0.25}Fe_{0.5}Mn_{0.25}]O_2/C-Fe_3O_4$ Sodium-Ion Batteries Using EMS Electrolyte for Energy Storage," Nano Lett., 14 [3] 1620-26 (2014). https://doi.org/10.1021/nl500077v -
J. Pan, N. N. Wang, Y. L. Zhou, X. F. Yang, W. Y. Zhou, Y. T. Qian, and J. Yang, "Simple Synthesis of a Porous
$Sb/Sb_2O_3$ Nanocomposite for a High-Capacity Anode Material in Na-Ion Batteries," Nano Res., 10 [5] 1794-803 (2017). https://doi.org/10.1007/s12274-017-1501-y -
D. S. Li, D. Yana, J. Q. Ma, W. Qin, X. J. Zhang, T. Lu, and L. K. Pan, "One-Step Microwave-Assisted Synthesis of
$Sb_2O_3$ /Reduced Graphene Oxide Composites as Advanced Anode Materials for Sodium-Ion Batteries," Ceram. Int., 42 [14] 15634-42 (2016). https://doi.org/10.1016/j.ceramint.2016.07.017 - Z. N. Guo, F. Sun, and W. X. Yuan, "Chemical Intercalations in Layered Transition Metal Chalcogenides: Syntheses, Structures, and Related Properties," Cryst. Growth Des., 17 [4] 2238-53 (2017). https://doi.org/10.1021/acs.cgd.7b00146
- M. Pumera, Z. Sofer, and A. Ambrosi, "Layered Transition Metal Dichalcogenides for Electrochemical Energy Generation and Storage," J. Mater. Chem. A, 2 [24] 8981-87 (2014). https://doi.org/10.1039/C4TA00652F
- L. Wu, X. H. Hu, J. F. Qian, F. Pei, F. Y. Wu, R. J. Mao, X. P. Ai, H. X. Yang, and Y. L. Cao, "A Sn-SnS-C Nanocomposite as Anode Host Materials for Na-Ion Batteries," J. Mater. Chem. A, 1 [24] 7181-84 (2013). https://doi.org/10.1039/c3ta10920h
- L. Wu, H. Y. Lu, L. F. Xiao, J. F. Qian, X. P. Ai, H. X. Yang, and Y. L. Cao, "A Tin(II) Sulfide-Carbon Anode Material Based on Combined Conversion and Alloying Reactions for Sodium-Ion Batteries," J. Mater. Chem. A, 2 [39] 16424-28 (2014). https://doi.org/10.1039/C4TA03365E
-
T. Zhou, W. K. Pang, C. Zhang, J. Yang, Z. Chen, H. K. Liu, and Z. Guo, "Enhanced Sodium-Ion Battery Performance by Structural Phase Transition from Two-Dimensional Hexagonal-
$SnS_2$ to Orthorhombic-SnS," ACS Nano, 8 [8] 8323-33 (2014). https://doi.org/10.1021/nn503582c -
B. Qu, C. Ma, G. Ji, C. Xu, J. Xu, Y. S. Meng, T. Wang, and J. Y. Lee, "Layered
$SnS_2$ -Reduced Graphene Oxide Composite - A High-Capacity, High-Rate, and Long-Cycle Life Sodium-Ion Battery Anode Material," Adv. Mater., 26 [23] 3854-59 (2014). https://doi.org/10.1002/adma.201306314 -
Y. D. Zhang, P. Y. Zhu, L. L. Huang, J. Xie, S. C. Zhang, G. S. Cao, and X. B. Zhao, "Few-Layered
$SnS_2$ on FewLayered Reduced Graphene Oxide as Na-Ion Battery Anode with Ultralong Cycle Life and Superior Rate Capability," Adv. Funct. Mater., 25 [3] 481-89 (2015). https://doi.org/10.1002/adfm.201402833 -
F. Z. Tu, X. Xu, P. Z. Wang, L. Si, X. S. Zhou, and J. C. Bao, "A Few-Layer
$SnS_2$ /Reduced Graphene Oxide Sandwich Hybrid for Efficient Sodium Storage," J. Phys. Chem. C, 121 [6] 3261-69 (2017). https://doi.org/10.1021/acs.jpcc.6b12692 - J. H. Kim, Y. H. Jung, J. H. Yun, P. Ragupathy, and D. K. Kim, "Enhancing the Sequential Conversion-Alloying Reaction of Mixed Sn-S Hybrid Anode for Efficient Sodium Storage by a Carbon Healed Graphene Oxide," Small, 14 [4] 1702605 (2018). https://doi.org/10.1002/smll.201702605
- Y. Kim, Y. Kim, Y. Park, Y. N. Jo, Y. J. Kim, N. S. Choi, and K. T. Lee, "SnSe Alloy as a Promising Anode Material for Na-Ion Batteries," Chem. Commun., 51 [1] 50-3 (2015). https://doi.org/10.1039/C4CC06106C
- Z. A. Zhang, X. X. Zhao, and J. Li, "SnSe/Carbon Nanocomposite Synthesized by High Energy Ball Milling as an Anode Material for Sodium-Ion and Lithium-Ion Batteries," Electrochim. Acta, 176 1296-301 (2015). https://doi.org/10.1016/j.electacta.2015.07.140
-
F. Zhang, C. Xia, J. J. Zhu, B. Ahmed, H. F. Liang, D. B. Velusamy, U. Schwingenschlogl, and H. N. Alshareef, "
$SnSe_2$ 2D Anodes for Advanced Sodium Ion Batteries," Adv. Energy Mater., 6 [22] 1601188 (2016). https://doi.org/10.1002/aenm.201601188 - A. R. Park and C. M. Park, "Cubic Crystal-Structured SnTe for Superior Li- and Na-Ion Battery Anodes," ACS Nano, 11 [6] 6074-84 (2017). https://doi.org/10.1021/acsnano.7b02039
-
Y. Zhu, P. Nie, L. Shen, S. Dong, Q. Sheng, H. Li, H. Luo, and X. Zhang, "High Rate Capability and Superior Cycle Stability of a Flower-like
$Sb_2S_3$ Anode for High-Capacity Sodium Ion Batteries," Nanoscale, 7 [7] 3309-15 (2015). https://doi.org/10.1039/C4NR05242K -
S. M. Hwang, J. Kim, Y. Kim, and Y. Kim, "Na-Ion Storage Performance of Amorphous
$Sb_2S_3$ Nanoparticles: Anode for Na-Ion Batteries and Seawater Flow Batteries," J. Mater. Chem. A, 4 [46] 17946-51 (2016). https://doi.org/10.1039/C6TA07838A -
S. S. Yao, J. Cui, Z. H. Lu, Z .L. Xu, L. Qin, J. Q. Huang, Z. Sadighi, F. Ciucci, and J. K. Kim, "Unveiling the Unique Phase Transformation Behavior and Sodiation Kinetics of 1D van der Waals
$Sb_2S_3$ Anodes for Sodium Ion Batteries," Adv. Energy Mater., 7 [8] 1602149 (2017). https://doi.org/10.1002/aenm.201602149 -
S. Wang, S. Yuan, Y. B. Yin, Y. H. Zhu, X. B. Zhang, and J. M. Yan, "Green and Facile Fabrication of MWNTs@
$Sb_2S_3$ @PPy Coaxial Nanocables for High-Performance Na-Ion Batteries," Part. Part. Syst. Charact., 33 [8] 493-99 (2016). https://doi.org/10.1002/ppsc.201500227 -
Y. Zhao and A. Manthiram, "Amorphous
$Sb_2S_3$ Embedded in Graphite: A High-Rate, Long-Life Anode Material for Sodium-Ion Batteries," Chem. Commun., 51 [67] 13205-8 (2015). https://doi.org/10.1039/C5CC03825A - D. Y. W. Yu, P. V. Prikhodchenko, C. W. Mason, S. K. Batabyal, J. Gun, S. Sladkevich, A. G. Medvedev, and O. Lev, "High-Capacity Antimony Sulphide Nanoparticle-Decorated Graphene Composite as Anode for Sodium-Ion Batteries," Nat. Commun., 4 2922 (2013). https://doi.org/10.1038/ncomms3922
-
X. Xiong, G. Wang, Y. Lin, Y. Wang, X. Ou, F. Zheng, C. Yang, J. H. Wang, and M. Liu, "Enhancing Sodium Ion Battery Performance by Strongly Binding Nanostructured
$Sb_2S_3$ on Sulfur-Doped Graphene Sheets," ACS Nano, 10 [12] 10953-59 (2016). https://doi.org/10.1021/acsnano.6b05653 -
W. Luo, A. Calas, C. Tang, F. Li, L. Zhou, and L. Mai, "Ultralong
$Sb_2Se_3$ Nanowire-Based Free-Standing Membrane Anode for Lithium/Sodium Ion Batteries," ACS Appl. Mater. Interfaces, 8 [51] 35219-26 (2016). https://doi.org/10.1021/acsami.6b11544 -
P. Ge, X. Cao, H. Hou, S. Li, and X. Ji, "Rodlike
$Sb_2Se_3$ Wrapped with Carbon: The Exploring of Electrochemical Properties in Sodium-Ion Batteries," ACS Appl. Mater. Interfaces, 9 [40] 34979-89 (2017). https://doi.org/10.1021/acsami.7b10886 -
K. H. Nam, J. H. Choi, and C. M. Park, "Highly Reversible Na-Ion Reaction in Nanostructured
$Sb_2Te_3-C$ Composites as Na-Ion Battery Anodes," J. Electrochem. Soc., 164 [9] A2056-64 (2017). https://doi.org/10.1149/2.1161709jes -
P. R. Kumar, Y. H. Jung, and D. K. Kim, "High Performance of
$MoS_2$ Microflowers with a Water-Based Binder as an Anode for Na-Ion Batteries," RSC Adv., 5 [97] 79845-51 (2015). https://doi.org/10.1039/C5RA16297A -
C. B. Zhu, X. K. Mu, P. A. van Aken, Y. Yu, and J. Maier, "Single-Layered Ultrasmall Nanoplates of
$MoS_2$ Embedded in Carbon Nanofibers with Excellent Electrochemical Performance for Lithium and Sodium Storage," Angew. Chem., Int. Ed., 53 [8] 2152-56 (2014). https://doi.org/10.1002/anie.201308354 -
F. E. Niu, J. Yang, N. N. Wang, D. P. Zhang, W. L. Fan, J. Yang, and Y. T. Qian, "
$MoSe_2$ -Covered N,P-Doped Carbon Nanosheets as a Long-Life and High-Rate Anode Material for Sodium-Ion Batteries," Adv. Funct. Mater., 27 [23] 1700522 (2017). https://doi.org/10.1002/adfm.201700522 -
K. Zhang, M. Park, L. M. Zhou, G. H. Lee, J. Shin, Z. Hu, S. L. Chou, J. Chen, and Y. M. Kang, "Cobalt-Doped
$FeS_2$ Nanospheres with Complete Solid Solubility as a High-Performance Anode Material for Sodium-Ion Batteries," Angew. Chem., Int. Ed., 55 [41] 12822-26 (2016). https://doi.org/10.1002/anie.201607469 -
W. X. Zhao, C. X. Guo, and C. M. Li, "Lychee-like
$FeS_2@FeSe_2$ Core-Shell Microspheres Anode in Sodium Ion Batteries for Large Capacity and Ultralong Cycle Life," J. Mater. Chem. A, 5 [36] 19195-202 (2017). https://doi.org/10.1039/C7TA05931K - Q. Guo, Y. Ma, T. Chen, Q. Xia, M. Yang, H. Xia, and Y. Yu, "Cobalt Sulfide Quantum Dot Embedded N/S-Doped Carbon Nanosheets with Superior Reversibility and Rate Capability for Sodium-Ion Batteries," ACS Nano, 11 [12] 12658-67 (2017). https://doi.org/10.1021/acsnano.7b07132
- Y. N. Ko, S. H. Choi, and Y. C. Kang, "Hollow Cobalt Selenide Microspheres: Synthesis and Application as Anode Materials for Na-Ion Batteries," ACS Appl. Mater. Interface, 8 [10] 6449-56 (2016). https://doi.org/10.1021/acsami.5b11963
-
J. H. Kim, J. H. Yun, and D. K. Kim, "A Robust Approach for Efficient Sodium Storage of
$GeS_2$ Hybrid Anode by Electrochemically Driven Amorphization," Adv. Energy Mater., 1703499 (2018). - X. Y. Yu, L. Yu, and X. W. Lou, "Metal Sulfide Hollow Nanostructures for Electrochemical Energy Storage," Adv. Energy Mater., 6 [3] 1501333 (2016). https://doi.org/10.1002/aenm.201501333
- X. Huang, Z. Zeng, and H. Zhang, "Metal Dichalcogenide Nanosheets: Preparation, Properties and Applications," Chem. Soc. Rev., 42 [5] 1934-46 (2013). https://doi.org/10.1039/c2cs35387c
- X. Rui, H. Tan, and Q. Yan, "Nanostructured Metal Sulfides for Energy Storage," Nanoscale, 6 [17] 9889-924 (2014). https://doi.org/10.1039/C4NR03057E
-
W. Li, M. Zhou, H. M. Li, K. L. Wang, S. J. Cheng, and K. Jiang, "Carbon-Coated
$Sb_2Se_3$ Composite as Anode Material for Sodium Ion Batteries," Electrochem. Commun., 60 74-7 (2015). https://doi.org/10.1016/j.elecom.2015.08.014 -
J. Park, J. S. Kim, J. W. Park, T. H. Nam, K. W. Kim, J. H. Ahn, G. Wang, and H. J. Ahn, "Discharge Mechanism of
$MoS_2$ for Sodium Ion Battery: Electrochemical Measurements and Characterization," Electrochim. Acta, 92 427-32 (2013). https://doi.org/10.1016/j.electacta.2013.01.057 -
X. S. Song, X. F. Li, Z. M. Bai, B. Yan, D. J. Li, and X. L. Sun, "Morphology-Dependent Performance of Nanostructured
$Ni_3S_2/N$ Anode Electrodes for High Performance Sodium Ion Batteries," Nano Energy, 26 533-40 (2016). https://doi.org/10.1016/j.nanoen.2016.06.019 -
Y. Han, S. Y. Liu, L. Cui, L. Xu, J. Xie, X. K. Xia, W. K. Hao, B. Wang, H. Li, and J. Gao, "Graphene-Immobilized Flower-like
$Ni_3S_2$ Nanoflakes as a Stable Binder-Free Anode Material for Sodium-Ion Batteries," Int. J. Miner., Metall. Mater., 25 [1] 88-93 (2018). https://doi.org/10.1007/s12613-018-1550-6 - S. Choi, Y. G. Cho, J. Kim, N. S. Choi, H. K. Song, G. Wang, and S. Park, "Mesoporous Germanium Anode Materials for Lithium-Ion Battery with Exceptional Cycling Stability in Wide Temperature Range," Small, 13 [13] 1603045 (2017). https://doi.org/10.1002/smll.201603045
- P. R. Abel, Y. M. Lin, T. de Souza, C. Y. Chou, A. Gupta, J. B. Goodenough, G. S. Hwang, A. Heller, and C. B. Mullins, "Nanocolumnar Germanium Thin Films as a High-Rate Sodium-Ion Battery Anode Material," J. Phys. Chem. C, 117 [37] 18885-90 (2013). https://doi.org/10.1021/jp407322k
- M. Mayo, K. J. Griffith, C. J. Pickard, and A. J. Morris, "Ab Initio Study of Phosphorus Anodes for Lithium- and Sodium-Ion Batteries," Chem. Mater., 28 [7] 2011-21 (2016). https://doi.org/10.1021/acs.chemmater.5b04208
- M. Dahbi, N. Yabuuchi, M. Fukunishi, K. Kubota, K. Chihara, K. Tokiwa, X. F. Yu, H. Ushiyama, K. Yamashita, J. Y. Son, Y. T. Cui, H. Oji, and S. Komaba, "Black Phosphorus as a High-Capacity, High-Capability Negative Electrode for Sodium-Ion Batteries: Investigation of the Electrode/Interface," Chem. Mater., 28 [6] 1625-35 (2016). https://doi.org/10.1021/acs.chemmater.5b03524
-
X. L. Fan, J. F. Mao, Y. J. Zhu, C. Luo, L. M. Suo, T. Gao, F. D. Han, S. C. Liou, and C. S. Wang, "Superior Stable Self-Healing
$SnP_3$ Anode for Sodium-Ion Batteries," Adv. Energy Mater., 5 [18] 1500174 (2015). https://doi.org/10.1002/aenm.201500174 - Y. Kim, Y. Kim, A. Choi, S. Woo, D. Mok, N. S. Choi, Y. S. Jung, J. H. Ryu, S. M. Oh, and K. T. Lee, "Tin Phosphide as a Promising Anode Material for Na-Ion Batteries," Adv. Mater., 26 [24] 4139-44 (2014). https://doi.org/10.1002/adma.201305638
-
C. Wu, P. Kopold, P. A. van Aken, J. Maier, and Y. Yu, "High Performance Graphene/
$Ni_2P$ Hybrid Anodes for Lithium and Sodium Storage through 3D Yolk-Shell-Like Nanostructural Design," Adv. Mater., 29 [3] 1604015 (2017). https://doi.org/10.1002/adma.201604015 - X. J. Wang, K. Chen, G. Wang, X. J. Liu, and H. Wang, "Rational Design of Three-Dimensional Graphene Encapsulated with Hollow FeP@Carbon Nanocomposite as Outstanding Anode Material for Lithium Ion and Sodium Ion Batteries," ACS Nano, 11 [11] 11602-16 (2017). https://doi.org/10.1021/acsnano.7b06625
- X. L. Fan, T. Gao, C. Luo, F. Wang, J. K. Hu, and C. S. Wang, "Superior Reversible Tin Phosphide-Carbon Spheres for Sodium Ion Battery Anode," Nano Energy, 38 350-57 (2017). https://doi.org/10.1016/j.nanoen.2017.06.014
- L. B. Ma, P. J. Yan, S. K. Wu, G. Y. Zhu, and Y. L. Shen, "Engineering Tin Phosphides@Carbon Yolk-Shell Nanocube Structures as a Highly Stable Anode Material for Sodium-Ion Batteries," J. Mater. Chem. A, 5 [32] 16994-7000 (2017). https://doi.org/10.1039/C7TA04900E
-
Q. Li, Z. Q. Li, Z. W. Zhang, C. X. Li, J. Y. Ma, C. X. Wang, X. L. Ge, S. H. Dong, and L. W. Yin, "Low-Temperature Solution-Based Phosphorization Reaction Route to
$Sn_4P_3$ /Reduced Graphene Oxide Nanohybrids as Anodes for Sodium Ion Batteries," Adv. Energy Mater., 6 [15] 1600376 (2016). https://doi.org/10.1002/aenm.201600376 -
W. J. Li, S. L. Chou, J. Z. Wang, J. H. Kim, H. K. Liu, and S. X. Dou, "
$Sn_{4+x}P_3$ @ Amorphous Sn-P Composites as Anodes for Sodium-Ion Batteries with Low Cost, High Capacity, Long Life, and Superior Rate Capability," Adv. Mater., 26 [24] 4037-42 (2014). https://doi.org/10.1002/adma.201400794 - Z. D. Huang, H. S. Hou, C. Wang, S. M. Li, Y. Zhang, and X. B. Ji, "Molybdenum Phosphide: A Conversion-type Anode for Ultralong-Life Sodium-Ion Batteries," Chem. Mater., 29 [17] 7313-22 (2017). https://doi.org/10.1021/acs.chemmater.7b02193
- F. Han, C. Y. J. Tan, and Z. Q. Gao, "Improving the Specific Capacity and Cyclability of Sodium-Ion Batteries by Engineering a Dual-Carbon Phase-Modified Amorphous and Mesoporous Iron Phosphide," ChemElectroChem, 3 [7] 1054-62 (2016). https://doi.org/10.1002/celc.201600101
- W. J. Zhang, M. Dahbi, S. Amagasa, Y. Yamada, and S. Komaba, "Iron Phosphide as Negative Electrode Material for Na-Ion Batteries," Electrochem. Commun., 69 11-4 (2016). https://doi.org/10.1016/j.elecom.2016.05.005
- Z. Q. Li, L. Y. Zhang, X. L. Ge, C. X. Li, S. H. Dong, C. X. Wang, and L. W. Yin, "Core-Shell Structured CoP/FeP Porous Microcubes Interconnected by Reduced Graphene Oxide as High Performance Anodes for Sodium Ion Batteries," Nano Energy, 32 494-502 (2017). https://doi.org/10.1016/j.nanoen.2017.01.009
- K. Zhang, M. Park, J. Zhang, G. H. Lee, J. Shin, and Y. M. Kang, "Cobalt Phosphide Nanoparticles Embedded in Nitrogen-Doped Carbon Nanosheets: Promising Anode Material with High Rate Capability and Long Cycle Life for Sodium-Ion Batteries," Nano Res., 10 [12] 4337-50 (2017). https://doi.org/10.1007/s12274-017-1649-5
- X. L. Ge, Z. Q. Li, and L. W. Yin, "Metal-Organic Frameworks Derived Porous Core/ShellCoP@C Polyhedrons Anchored on 3D Reduced Graphene Oxide Networks as Anode for Sodium-Ion Battery," Nano Energy, 32 117-24 (2017). https://doi.org/10.1016/j.nanoen.2016.11.055
-
M. P. Fan, Y. Chen, Y. H. Xie, T. Z. Yang, X. W. Shen, N. Xu, H. Y. Yu, and C. L. Yan, "Half-Cell and Full-Cell Applications of Highly Stable and Binder-Free Sodium Ion Batteries Based on
$Cu_3P$ Nanowire Anodes," Adv. Funct. Mater., 26 [28] 5019-27 (2016). https://doi.org/10.1002/adfm.201601323 -
S. O. Kim and A. Manthiram, "The Facile Synthesis and Enhanced Sodium-Storage Performance of a Chemically Bonded
$CuP_2/C$ Hybrid Anode," Chem. Commun., 52 [23] 4337-40 (2016). https://doi.org/10.1039/C5CC10585D -
Y. Y. Lu, P. F. Zhou, K. X. Lei, Q. Zhao, Z. L. Tao, and J. Chen, "Selenium Phosphide (
$Se_4P_4$ ) as a New and Promising Anode Material for Sodium-Ion Batteries," Adv. Energy Mater., 7 [7] 1601973 (2017). https://doi.org/10.1002/aenm.201601973 - W. J. Li, S. L. Chou, J. Z. Wang, H. K. Liu, and S. X. Dou, "Simply Mixed Commercial Red Phosphorus and Carbon Nanotube Composite with Exceptionally Reversible Sodium-Ion Storage," Nano Lett., 13 [11] 5480-84 (2013). https://doi.org/10.1021/nl403053v
- W. Li, Z. Yang, M. Li, Y. Jiang, X. Wei, X. Zhong, L. Gu, and Y. Yu, "Amorphous Red Phosphorus Embedded in Highly Ordered Mesoporous Carbon with Superior Lithium and Sodium Storage Capacity," Nano Lett., 16 [3] 1546-53 (2016). https://doi.org/10.1021/acs.nanolett.5b03903
- Y. Kim, Y. Kim, A. Choi, S. Woo, D. Mok, N. S. Choi, Y. S. Jung, J. H. Ryu, S. M. Oh, and K. T. Lee, "Tin Phosphide as a Promising Anode Material for Na-Ion Batteries," Adv. Mater., 26 [24] 4139-44 (2014). https://doi.org/10.1002/adma.201305638
-
J. Liu, P. Kopold, C. Wu, P. A. van Aken, J. Maier, and Y. Yu, "Uniform Yolk-Shell
$Sn_4P_3@C$ Nanospheres as High-Capacity and Cycle-Stable Anode Materials for Sodium-Ion Batteries," Energy Environ. Sci., 8 [12] 3531-38 (2015). https://doi.org/10.1039/C5EE02074C -
J. F. Qian, Y. Xiong, Y. L. Cao, X. P. Ai, and H. X. Yang, "Synergistic Na-Storage Reactions in
$Sn_4P_3$ as a High-Capacity, Cycle-stable Anode of Na-Ion Batteries," Nano Lett., 14 [4] 1865-69 (2014). https://doi.org/10.1021/nl404637q
피인용 문헌
- 나트륨이차전지용 전환반응 음극 소재 기술 동향 vol.22, pp.1, 2018, https://doi.org/10.5229/jkes.2019.22.1.22
- Superior electrochemical sodium storage of V4P7 nanoparticles as an anode for rechargeable sodium-ion batteries vol.55, pp.22, 2018, https://doi.org/10.1039/c8cc09184f
- Enhancing the Electrochemical Performance of SbTe Bimetallic Anodes for High-Performance Sodium-Ion Batteries: Roles of the Binder and Carbon Support Matrix vol.9, pp.8, 2019, https://doi.org/10.3390/nano9081134
- Emergence of rechargeable seawater batteries vol.7, pp.40, 2018, https://doi.org/10.1039/c9ta08321a
- Solvated Ion Intercalation in Graphite: Sodium and Beyond vol.8, pp.None, 2020, https://doi.org/10.3389/fchem.2020.00432
- A Stable Lead (II) Oxide-Carbon Composite Anode Candidate for Secondary Lithium Batteries vol.167, pp.6, 2018, https://doi.org/10.1149/1945-7111/ab8116
- FeTiO 3 as Anode Material for Sodium‐Ion Batteries: from Morphology Control to Decomposition vol.7, pp.7, 2020, https://doi.org/10.1002/celc.202000150
- DFT-Guided Design and Fabrication of Carbon-Nitride-Based Materials for Energy Storage Devices: A Review vol.13, pp.1, 2018, https://doi.org/10.1007/s40820-020-00522-1
- N-doped C@ZnSe as a low cost positive electrode for aluminum-ion batteries: Better electrochemical performance with high voltage platform of ~1.8 V and new reaction mechanism vol.370, pp.None, 2021, https://doi.org/10.1016/j.electacta.2021.137790
- The rational design of inorganic and organic material based nanocomposite hybrids as Na-ion battery electrodes vol.2, pp.15, 2018, https://doi.org/10.1039/d1ma00490e
- Ultra-long cycle life of flexible Sn anode using DME electrolyte vol.871, pp.None, 2021, https://doi.org/10.1016/j.jallcom.2021.159549
- Boron-doped Sb/SbO2@rGO composites with tunable components and enlarged lattice spacing for high-rate sodium-ion batteries vol.54, pp.31, 2018, https://doi.org/10.1088/1361-6463/abfdd8
- Room-Temperature Synthesis and Stable Na-ion Storage Performance of Two-Dimensional Mixed Lead-Bismuth Oxychloride vol.125, pp.32, 2021, https://doi.org/10.1021/acs.jpcc.1c04463