Flaw Discrimination for Welding Points in Boiler Tubes by Phased Array Ultrasonic Testing

위상배열초음파탐상검사에 의한 보일러관 용접부의 결함 판별

  • Published : 2018.07.10

Abstract

Nuclear safety law's amendment caused many problems to use radiography testing(RT). Phased array ultrasonic testing(PAUT) was adapted instead of RT for NDE of welding points in boiler tubes these days. Unfortunately, PAUT doesn't give us the discrimination characteristics about flaws distinction and flaws size clearly. In this thesis, the distinction characteristics of flaw types and the detection characteristics of flaw size using PAUT of welding points in boiler tubes were analyzed. It was concluded that PAUT can distinguish between planar flaws and rounded flaws, but it is hard to tell apart the types of flaw respectively. We paid attention to the discrimination of flaws size because PAUT tends to underestimate the flaw size of porosity and underestimate or overestimate the flaw size of porosity.

방사선 관련 법의 개정으로 보일러관 비파괴검사 방법으로 방사선투과검사를 대체하여 위상배열초음파탐상검사를 시행하고 있다. ASME BPVC 제5장 4절에서 제시하고 있는 주요 결함별 정성적 특징과 실제 결함을 비교하여 결함종류 판별을 확인하였고 시험편에 대해 방사선투과검사와 위상배열초음파탐상검사를 시행하여 결함크기 해상 특성을 예측하였다. 위상배열초음파탐상검사는 면상결함군과 구상결함군 결함의 판별은 할 수 있으나 형태가 유사한 결함의 판별은 용이하지 않음을 확인하였다. 또한 결함크기가 합격 여부를 좌우하는 슬래그의 경우 결함의 위치나 방향에 무관하게 방사선투과검사 대비 과소 예측하였으며, 기공은 결함의 위치, 방향 및 군집 유무에 따라 과대 또는 과소 예측하는 정량적 특성이 나타나므로 결함크기 판별에 주의를 요함을 확인하였다.

Keywords

References

  1. Nuclear Safety and Security Commission, 2013, 방사선 안전관리등의 기술기준에관한 규칙Nuclear Safety and Security Commission
  2. The American Society of Mechanical Engineers, ASME BPVC-VIII, 2015, The American Society of Mechanical Engineerspp. 393, pp. 427.
  3. The American Society of Mechanical Engineers, ASME BPVC-V, 2015, The American Society of Mechanical Engineerspp. 76.
  4. Sungryoung Yang, 2015, PAUT and UT, Sang Hackdang, Seoul, pp. 31 - 35.
  5. Heungsil Bang, 2015, Welding and Non destructive Evaluation Technology, Korea Learning Institute, Taean