DOI QR코드

DOI QR Code

Experimental and analytical study on the shear strength of corrugated web steel beams

  • Barakat, Samer (Department of Civil and Environmental Engineering, College of Engineering, University of Sharjah) ;
  • Leblouba, Moussa (Department of Civil and Environmental Engineering, College of Engineering, University of Sharjah)
  • 투고 : 2018.02.04
  • 심사 : 2018.05.14
  • 발행 : 2018.07.25

초록

Compared to conventional flat web I-beams, the prediction of shear buckling stress of corrugated web steel beams (CWSBs) is not straightforward. But the CWSBs combined advantages of lightweight large spans with low-depth high load-bearing capacities justify dealing with such difficulties. This work investigates experimentally and analytically the shear strength of trapezoidal CWSBs. A set of large scale CWSBs are manufactured and tested to failure in shear. The results are compared with widely accepted CWSBs shear strength prediction models. Confirmed by the experimental results, the linear buckling analyses of trapezoidal corrugated webs demonstrated that the local shear buckling occurs only in the flat plane folds of the web, while the global shear buckling occurs over multiple folds of the web. New analytical prediction model accounting for the interaction between the local and global shear buckling of CWSBs is proposed. Experimental results from the current work and previous studies are compared with the proposed analytical prediction model. The predictions of the proposed model are significantly better than all other studied models. In light of the dispersion of test data, accuracy, consistency, and economical aspects of the prediction models, the authors recommend their proposed model for the design of CWSBs over the rest of the models.

키워드

과제정보

연구 과제 주관 기관 : University of Sharjah

참고문헌

  1. Abbas, H.H. (2003), "Analysis and design of corrugated web Igirders for bridges using high performance steel", Ph.D. Dissertation; Lehigh University, Bethlehem, PA, USA.
  2. Aggarwal, K., Wu, S. and Papangelis, J. (2018), "Finite element analysis of local shear buckling in corrugated web beams", Eng. Struct., 162, 37-50. https://doi.org/10.1016/j.engstruct.2018.01.016
  3. Ahmed, S.E. (2005), "Plate girders with corrugated steel webs", Eng. J., 42(1), 1-13. https://doi.org/10.2307/808625
  4. Barakat, S. and Leblouba, M. (2018), Shear Strength of Corrugated Web Steel Beams: Experimental and Analytical Investigation (No. 18-02361).
  5. Barakat, S., Mansouri, A.A. and Altoubat, S. (2015), "Shear strength of steel beams with trapezoidal corrugated webs using regression analysis", Steel Compos. Struct., Int. J., 18(3), 757-773. https://doi.org/10.12989/scs.2015.18.3.757
  6. Basiński, W. (2018), "Shear Buckling of Plate Girders with Corrugated Web Restrained by End Stiffeners", Periodica Polytech. Civil Eng., 62(3), 757-771. DOI: https://doi.org/10.3311/PPci.11554
  7. Bergfelt, A. and Leiva, L. (1984), Shear Buckling of Trapezoidally Corrugated Girders Webs, Division of Steel and Timber Structures, Chalmers University of Technology, Gothenburg, 84(2).
  8. BS EN 1993-1-5:2006 - Eurocode 3 (2006), Design of steel structures-Part 1-5: General rules - Plated structural elements; CEN, United Kingdom.
  9. Chen, X.C., Bai, Z.Z., Zeng, Y., Jiang, R.J. and Au, F.T. (2017), "Prestressed concrete bridges with corrugated steel webs: Nonlinear analysis and experimental investigation", Steel Compos. Struct., Int. J., 21(5), 1045-1067.
  10. Driver, R.G., Abbas, H.H. and Sause, R. (2006), "Shear behavior of corrugated web bridge girders", J. Struct. Eng., 132(2), 195-203. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:2(195)
  11. Dubina, D., Ungureanu, V. and Gîlia, L. (2015), "Experimental investigations of cold-formed steel beams of corrugated web and built-up section for flanges", Thin-Wall. Struct., 90, 159-170. https://doi.org/10.1016/j.tws.2015.01.018
  12. Easley, J.T. (1975), "Buckling formulas for corrugated metal shear diaphragms", J. Struct. Div.-ASCE, 101(7), 1403-1417.
  13. El-Metwally, A.S. (1998), "Prestressed composite girders with corrugated steel webs", MS.C. Dissertation; University of Calgary, Canada.
  14. Elgaaly, M., Hamilton, R.W. and Seshadri, A. (1996), "Shear Strength of Beams with Corrugated Webs", J. Struct. Eng., 122(4), 390-398. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:4(390)
  15. Guo, T. and Sause, R. (2014), "Analysis of local elastic shear buckling of trapezoidal corrugated steel webs", J. Constr. Steel Res., 102, 59-71. https://doi.org/10.1016/j.jcsr.2014.06.006
  16. Hassanein, M. and Kharoob, O. (2013), "Behavior of bridge girders with corrugated webs: (II) Shear strength and design", Eng. Struct., 57(December), 544-553. https://doi.org/10.1016/j.engstruct.2013.04.015
  17. Hassanein, M. and Kharoob, O. (2014), "Shear buckling behavior of tapered bridge girders with steel corrugated webs", Eng. Struct., 74(1), 157-169. https://doi.org/10.1016/j.engstruct.2014.05.021
  18. Huang, L., Hikosaka, H. and Komine, K. (2004), "Simulation of accordion effect in corrugated steel web with concrete flanges", Comp. Struct., 82(23-26), 2061-2069. https://doi.org/10.1016/j.compstruc.2003.07.010
  19. Kharoob, O. and Hassanein, M. (2015), "Linearly tapered bridge girder panels with steel corrugated webs near intermediate supports of continuous bridges", Thin-Wall. Struct., 88, 119-128. https://doi.org/10.1016/j.tws.2014.11.021
  20. Leblouba, M., Barakat, S., Altoubat, S., Junaid, T.M. and Maalej, M. (2017a), "Normalized shear strength of trapezoidal corrugated steel webs", J. Constr. Steel Res., 136, 75-90. https://doi.org/10.1016/j.jcsr.2017.05.007
  21. Leblouba, M., Junaid, M.T., Barakat, S., Altoubat, S. and Maalej, M. (2017b), "Shear buckling and stress distribution in trapezoidal web corrugated steel beams", Thin-Wall. Struct., 113, 13-26. https://doi.org/10.1016/j.tws.2017.01.002
  22. Linder, J. and Aschinger, T.R. (1988), "Grenzschubtragfähigkeit von I-Trägern mit trapezförmig profilierten Stäben", Stahlbau, 57(12), 377-380.
  23. Lindner, J. and Huang, B. (1995), "Beulwerte für trapezförmig profilierte Bleche unter Schubbeanspruchung", Stahlbau, 64(2), 370-374.
  24. Luo, R. and Edlund, B. (1996), "Shear capacity of plate girders with trapezoidally corrugated webs", Thin-Wall. Struct., 26(1), 19-44. https://doi.org/10.1016/0263-8231(96)00006-7
  25. Lu, Y. and Ji, L. (2018), "Behavior of optimized prestressed concrete composite box-girders with Corrugated Steel Webs", Steel Compos. Struct., Int. J., 26(2), 183-196.
  26. Ma, Y., Ni, Y.S., Xu, D. and Li, J.K. (2017), "Space grid analysis method in modelling shear lag of cable-stayed bridge with corrugated steel webs", Steel Compos. Struct., Int. J., 24(5), 549-559.
  27. Moon, J., Yi, J., Choi, B.H. and Lee, H.-E. (2009), "Shear strength and design of trapezoidally corrugated steel webs" J. Constr. Steel Res., 65(5), 1198-1205. https://doi.org/10.1016/j.jcsr.2008.07.018
  28. Niea, J.-G., Zhu, L., Tao, M.-X. and Tang, L. (2013), "Shear strength of trapezoidal corrugated steel webs", J. Constr. Steel Res., 85(1), 105-115. https://doi.org/10.1016/j.jcsr.2013.02.012
  29. Pasternak, H. and Kubieniec, G. (2010), "Plate girders with corrugated webs", J. Civil Eng. Manag., 16(2), 166-171. https://doi.org/10.3846/jcem.2010.17
  30. Sause, R. and Braxtan, T.N. (2011), "Shear strength of trapezoidal corrugated steel webs", J. Constr. Steel Res., 67(2), 223-236. https://doi.org/10.1016/j.jcsr.2010.08.004
  31. Shiratani, H., Ikeda, H., IMAI, Y. and Kano, K. (2003), "Flexural shear behavior of composite bridge girder with corrugated steel webs around middle support", JSCE J., 724(I-62), 49-67.
  32. Timoshenko, S.P. and Gere, J.M. (1961), Theory of Elastic Stability, McGraw-Hil, New York, NY, USA.
  33. Yi, J., Gil, H., Youm, K. and Lee, H. (2008), "Interactive shear buckling behavior of trapezoidally corrugated steel webs", Eng. Struct., 30(6), 1659-1666. https://doi.org/10.1016/j.engstruct.2007.11.009