DOI QR코드

DOI QR Code

Dynamic increase factor for progressive collapse analysis of semi-rigid steel frames

  • Zhu, Yan Fei (School of Mechanics and Civil Engineering, Northwestern Polytechnical University) ;
  • Chen, Chang Hong (School of Mechanics and Civil Engineering, Northwestern Polytechnical University) ;
  • Yao, Yao (School of Mechanics and Civil Engineering, Northwestern Polytechnical University) ;
  • Keer, Leon M. (Civil and Environmental Engineering, Northwestern University) ;
  • Huang, Ying (School of Civil Engineering, Xi'an University of Architecture and Technology)
  • 투고 : 2018.01.04
  • 심사 : 2018.05.25
  • 발행 : 2018.07.25

초록

An empirical and efficient method is presented for calculating the dynamic increase factor to amplify the applied loads on the affected bays of a steel frame structure with semi-rigid connections. The nonlinear static alternate path analysis is used to evaluate the dynamic responses. First, the polynomial models of the extended end plate and the top and seat connection are modified, and the proposed polynomial model of the flush end plate connection shows good agreement as compared with experimental results. Next, a beam model with nonlinear spring elements and plastic hinges is utilized to incorporate the combined effect of connection flexibility and material nonlinearity. A new step-by-step analysis procedure is established to obtain quickly the dynamic increase factor based on a combination of the pushdown analysis and nonlinear dynamic analysis. Finally, the modified dynamic increase factor equation, defined as a function of the maximum ratio value of energy demand to energy capacity of an affected beam, is derived by curve fitting data points generated by the different analysis cases with different column removal scenarios and five types of semi-rigid connections.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China, Shanxi National Science Foundation of China

참고문헌

  1. Arshian, A.H. and Morgenthal, G. (2017), "Three-dimensional progressive collapse analysis of reinforced concrete frame structures subjected to sequential column removal", Eng. Struct., 132, 87-97. https://doi.org/10.1016/j.engstruct.2016.11.018
  2. Bjorhovde, R., Colson, A. and Brozzetti, J. (1990), "Classification system for beam-to-column connections", J. Struct. Eng., 116(11), 3059-3076. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:11(3059)
  3. Chan, S.L. and Chui, P.T. (2000), "Nonlinear static and cyclic analysis of steel frames with semi-rigid connections", Elsevier, Amsterdam, Netherlands.
  4. Chen, C.H., Zhu, Y.F., Yao, Y., Huang, Y. and Long, X. (2016a), "An evaluation method to predict progressive collapse resistance of steel frame structures", J. Constr. Steel Res., 22, 238-250.
  5. Chen, C.H., Zhu, Y.F., Yao, Y. and Huang, Y. (2016b), "Progressive collapse analysis of steel frame structure based on the energy principle", Steel Compos. Struct., Int. J., 21(3), 553-571. https://doi.org/10.12989/scs.2016.21.3.553
  6. Chen, C.H., Zhu, Y.F., Yao, Y. and Huang, Y. (2016c), "The finite element model research of the pre-twisted thin-walled beam", Struct. Eng. Mech., Int. J., 57(3), 389-402. https://doi.org/10.12989/sem.2016.57.3.389
  7. Chen, C., Zhang, Q., Keer, L.M., Yao, Y. and Huang, Y. (2018a), "The multi-factor effect of tensile strength of concrete in numerical simulation based on the Monte Carlo random aggregate distribution", Constr. Build. Mater., 165, 585-595. https://doi.org/10.1016/j.conbuildmat.2018.01.056
  8. Degertekin, S.O. and Hayalioglu, M.S. (2004), "Design of nonlinear semi-rigid steel frames with semi-rigid column bases", Electron. J. Struct. Eng., 4, 1-16.
  9. Federal Emergency Management Agency 356 (2000), Prestandard and Commentary for the Seismic Rehabilitation of Buildings; Washington D.C., USA.
  10. Frye, M.J. and Morris, G.A. (1975), "Analysis of flexibly connected steel frames", Can. J. Civil Eng., 2(3), 280-291. https://doi.org/10.1139/l75-026
  11. Fu, Q.N., Tan, K.H., Zhou, X.H. and Yang, B. (2017), "Numerical simulations on three-dimensional composite structural systems against progressive collapse", J. Const. Steel Res., 135, 125-136. https://doi.org/10.1016/j.jcsr.2017.04.014
  12. Ihaddoudene, A.N.T., Saidani, M. and Chemrouk, M. (2009), "Mechanical model for the analysis of steel frames with semirigid joints", J. Constr. Steel Res., 65(3), 631-640. https://doi.org/10.1016/j.jcsr.2008.08.010
  13. Jones, S.W., Kirby, P.A. and Nethercort, D.A. (1983), "The analysis of frames with semi-rigid connections-a state-of-theart report", J. Constr. Steel Res., 3(2), 2-13. https://doi.org/10.1016/0143-974X(83)90017-2
  14. Khuyen, H.T. and Iwasaki, E. (2016), "An approximate method of dynamic amplification factor for alternate load path in redundancy and progressive collapse linear static analysis for steel truss bridges", Case Stud. Struct. Eng., 6, 53-62. https://doi.org/10.1016/j.csse.2016.06.001
  15. Li, Y., Lu, X.Z., Guan, H. and Ye, L.P. (2014), "An energy-based assessment on dynamic amplification factor for linear static analysis in progressive collapse design of ductile RC frame structures", Adv. Struct. Eng., 17(8), 1217-1225. https://doi.org/10.1260/1369-4332.17.8.1217
  16. Liu, M. (2013a), "A new dynamic increase factor for nonlinear static alternate path analysis of building frames against progressive collapse", Eng. Struct., 48, 666-673. https://doi.org/10.1016/j.engstruct.2012.12.011
  17. Liu, M. (2013b), "Discussion of -Alternate Path Method in Progressive Collapse Analysis: Variation of Dynamic and Nonlinear Load Increase Factors" by Aldo McKay, Kirk Marchand, and Manuel Diaz", Pract. Period. Struct. Des. Constr., 21(2), 07016001.
  18. Liu, M. (2016), "Discussion of -Alternate Path Method in Progressive Collapse Analysis: Variation of Dynamic and Nonlinear Load Increase Factors" by Aldo McKay, Kirk Marchand, and Manuel Diaz", Pract. Period. Struct. Des. Constr., 21(2), 07016001. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000166
  19. Marjanishvili, S. and Agnew, E. (2006), "Comparison of various procedures for progressive collapse analysis", J. Perform. Constr. Fac., 20(4), 365-374. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:4(365)
  20. Mashhadiali, N., Kheyroddin, A. and Zahiri-Hashemi, R. (2016), "Dynamic Increase Factor for Investigation of Progressive Collapse Potential in Tall Tube-Type Buildings", J. Perform. Constr. Fac., 30(6), 4016050. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000905
  21. Mirtaheri, M. and Zoghi, M.A. (2016), "Design guides to resist progressive collapse for steel structures", Steel Comp. Struct., Int. J., 20(2), 357-378. https://doi.org/10.12989/scs.2016.20.2.357
  22. Qin, X., Wang, W., Chen, Y. and Bao, Y. (2016), "A special reinforcing technique to improve resistance of beam-to-tubular column connections for progressive collapse prevention", Eng. Struct., 117, 26-39. https://doi.org/10.1016/j.engstruct.2016.03.012
  23. Saberi, V., Gerami, M. and Kheyroddin, A. (2014), "Comparison of bolted end plate and T-stub connection sensitivity to component thickness", J. Constr. Steel. Res., 98, 134-145. https://doi.org/10.1016/j.jcsr.2014.02.012
  24. Tavakoli, H.R. and Kiakojouri, F. (2013), "Numerical study of progressive collapse in framed structures: A new approach for dynamic column removal", Int. J. Eng. Trans A: Basics, 26(7), 685-692.
  25. Tsai, M.H. (2010), "An analytical methodology for the dynamic amplification factor in progressive collapse evaluation of building structures", Mech. Res. Commun., 37(1), 61-66. https://doi.org/10.1016/j.mechrescom.2009.11.001
  26. Tsai, M.H. (2012), "Assessment of analytical load and dynamic increase factors for progressive collapse analysis of building frames", Adv. Struct. Eng., 15(1), 41-54. https://doi.org/10.1260/1369-4332.15.1.41
  27. Unified Facilities Criteria (2009), Design of Buildings to Resist Progressive Collapse; (UFC4-023-03), Department of Defense, USA.
  28. US General Services Administration (2013), Progressive Collapse Analysis and Design Guidelines for New Federal Office Buildings and Major Modernization Projects; GSA.
  29. Wang, W., Fang, C., Qin, X. and Li, L. (2016), "Performance of practical beam-to-SHS column connections against progressive collapse", Eng. Struct., 106, 332-347. https://doi.org/10.1016/j.engstruct.2015.10.040
  30. Yang, B. and Tan, K.H. (2012), "Numerical analyses of steel beam-column joints subjected to catenary action", J. Constr. Steel Res., 70, 1-11. https://doi.org/10.1016/j.jcsr.2011.10.007
  31. Yang, B. and Tan, K.H. (2013), "Experimental tests of different types of bolted steel beam-column joints under a centralcolumn-removal scenario", Eng. Struct., 54, 112-130. https://doi.org/10.1016/j.engstruct.2013.03.037

피인용 문헌

  1. Component-based model for posttensioned steel connections against progressive collapse vol.40, pp.4, 2018, https://doi.org/10.12989/scs.2021.40.4.481
  2. Machine learning applications for assessment of dynamic progressive collapse of steel moment frames vol.36, pp.None, 2022, https://doi.org/10.1016/j.istruc.2021.12.067