참고문헌
- D. Stamenkovic and M. Milosevic, "Friction at rubber metal spring", Proceedings of 11th International Conference on Tribology, Belgrade, Serbia, 215 (2009).
- M. S. Khan, R. Franke, U. Gohs, D. Lehmann, and G. Heinrich, "Friction and wear behaviour of electron beam modified PTFE Filled EPDM compounds", Wear, 266, 175 (2009). https://doi.org/10.1016/j.wear.2008.06.012
- N. S. M. El-Tayeb and R. Md Nasir, "Effect of soft carbon black on tribology of deproteinised and polyisoprene rubbers", Wear, 262, 350 (2007). https://doi.org/10.1016/j.wear.2006.05.021
- D. Felhos and J. Karger-Kocsis, "Tribological testing of peroxide cured EPDM rubbers with different carbon black contents under dry sliding conditions against steel", Tribol. Int., 41, 404 (2008). https://doi.org/10.1016/j.triboint.2007.09.005
- S. Q. Lai, T. S. Li, X. J. Liu, and R. G. Lv, "A study on the friction and wear behavior of PTFE filled with acid treated nano-attapulgite", Macromol. Mater. Eng., 289, 916 (2004). https://doi.org/10.1002/mame.200400140
- Y. P. Wu, Y. Ma, Y. Q. Wang, and L. Q. Zhang, "Effects of characteristics of rubber, mixing and vulcanization on the structure and properties of rubber/clay nanocomposites by melt blending", Macromol. Mater. Eng., 289, 890 (2004). https://doi.org/10.1002/mame.200400085
- S. Kalpakjian and S. R. Schmid, "Manufacturing Processes for Engineering Materials", Pearson, New York, 250 (2007).
- A. Mukhopadhyay and S. Nihar, "Performance appraisal of a rubber-metal spring", J. Technol. Plast., 39, 29 (2014).
- A. Mukhopadhyay, "Flow behavior of 'EPDM' rubber during dry compression", J. Manuf. Sci. Prod., 14, 115 (2014).
- A. Mukhopadhyay, "Effect of some lubricants on the flow characteristics of EPDM rubber under compressive load", J. Manuf. Sci. Prod., 13, 1 (2013).
- K. Subulan, A. S. Tasan, and A. Baykasoglu, "Designing an environmentally conscious tire closed-loop supply chain net- work with multiple recovery options using interactive fuzzy goal programming", Appl. Math. Modell., 39, 2661 (2015). https://doi.org/10.1016/j.apm.2014.11.004
- J. D. Martínez, N. Puy, R. Murillo, T. García, M. V. Navarro, and A. M. Mastral, "Waste tyre pyrolysis-a review", Renew. Sustain. Energy Rev., 23, 179 (2013). https://doi.org/10.1016/j.rser.2013.02.038
- T. Amari, N. J. Themelis, and I. K. Wernick, "Resource recovery from used rubber tires", Resour. Policy, 25, 179 (1999). https://doi.org/10.1016/S0301-4207(99)00025-2
- C. Roy, A. Chaala, and H. Darmstadt, "The vacuum pyrolysis of used tires: End uses for oil and carbon black products", J. Anal. Appl. Pyrol., 51, 201 (1999). https://doi.org/10.1016/S0165-2370(99)00017-0
- B. Acevedo, A. M. Fernández, and C. Barriocanal, "Identification of polymers in waste tyre reinforcing fibre by thermal analysis and pyrolysis", J. Anal. Appl. Pyrol., 111, 224 (2015). https://doi.org/10.1016/j.jaap.2014.11.005
- Technical brochure, "Introduction to Chlorobutyl", Exxon Corporation, 268 (1987).
- V. Duchacek and A. J. Kuta, "Long-time sulfenamide-accelerated sulfur vulcanization of natural rubber/chlorobutyl rubber compounds", J. Appl. Polym. Sci., 32, 4849 (1986). https://doi.org/10.1002/app.1986.070320507
- Technical brochure, "Halobutyl Compounding for Pharmaceutical Applications", Exxon Corporation, 167 (1987).
- M. Morton, "Rubber technology", Germany: Springer; 183 (1999).