DOI QR코드

DOI QR Code

Rheological Characterization of the Gelation Behavior of PVA Solutions in DMSO Containing BA

붕산을 첨가한 폴리비닐알콜/디메틸술폭시드 용액의 겔화 거동에 관한 유변학적 고찰

  • Lee, Eun Jeoung (Department of Organic and Nano Engineering, Hanyang University) ;
  • Kim, Dong Jun (EP Material Development Center, LG Chem Ltd.) ;
  • Chae, Dong Wook (Department of Textile Engineering, Kyungpook National University) ;
  • Kim, Byoung Chul (Department of Organic and Nano Engineering, Hanyang University)
  • 이은정 (한양대학교 유기나노공학과) ;
  • 김동준 (LG화학 EP 소재개발센터) ;
  • 채동욱 (경북대학교 섬유공학과) ;
  • 김병철 (한양대학교 유기나노공학과)
  • Received : 2018.04.02
  • Accepted : 2018.05.18
  • Published : 2018.06.30

Abstract

The gelation behavior of poly(vinyl alcohol) (PVA) solutions in dimethyl sulfoxide (DMSO) containing boric acid (BA, $H_3BO_3$) under shear stress was rheologically investigated in terms of temperature and molecular weight of PVA. Time-dependent rheological properties of the solutions were analyzed to determine the effects of stress on the gelation mechanism. The solutions of low weight-average molecular weight ($M_w=31,000-50,000$) PVA showed more noticeable temperature-dependent viscosity changes than those of high weight-average molecular weight ($M_w=165,000-186,000$) PVA. The viscosity increase caused by stress indicated that the formation of the gel structure was promoted by stress. In time sweep experiments, all the PVA solutions showed stress-dependent rheological responses except for the high $M_w$ PVA solutions at $30^{\circ}C$. The viscosities of the solutions remained constant over the observed shearing time, indicating the formation of an irreversible gel. The effects of stress history were reconfirmed by the results of frequency sweep experiments. Antecedent shearing gave rise to many different time-dependent rheological responses. At $60^{\circ}C$, both low and high $M_w$ PVA solutions had loss tangent values (tan ${\delta}$) less than 1. Furthermore, the formation of gel structures increased the relaxation time (${\lambda}$) by up to 10 s.

Keywords

References

  1. P. Song, Z. Xu, Y. Lu, and Q. Guo, "Bioinspired Strategy for Tuning Thermal Stability of PVA via Hydrogen-Bond Crosslink", Compos. Sci. Technol., 2015, 118, 16-22. https://doi.org/10.1016/j.compscitech.2015.08.006
  2. V. J. Addiel, T. Motohiro, and K. Takaomi, "Ultrasound Stimulus Inducing Change in Hydrogen Bonded Crosslinking of Aqueous Polyvinyl Alcohols", Ultrason. Sonochem., 2014, 21, 295-309. https://doi.org/10.1016/j.ultsonch.2013.06.011
  3. M. Rumyantsev, "Influences of Co-Solvent on Hydrogen Bond Reorganization in Ternary Poly(vinyl alcohol) Solutions", Eur. Polym. J., 2013, 49, 2257-2266. https://doi.org/10.1016/j.eurpolymj.2013.05.005
  4. W. S. Lyoo, I. S. Seo, B. C. Ji, J. H. Kim, S. S. Kim, H. D. Ghim, B. C. Kim, and J. Lee, "Role of the Stereosequences of Poly(vinyl alcohol) in the Rheological Properties of Syndiotacticity-Rich Poly(vinyl alcohol)/Water Solutions", J. Appl. Polym. Sci., 2003, 88, 1858-1863. https://doi.org/10.1002/app.11875
  5. W. S. Lyoo, J. H. Kim, J. H. Choi, B. C. Kim, and J. Blackwell, "Role of Degree of Saponification in the Shear-Induced Molecular Orientation of Syndiotacticity-Rich Ultrahigh Molecular Weight Poly(vinyl alcohol)", Macromolecules, 2001, 34, 3982-3987. https://doi.org/10.1021/ma001338g
  6. W. S. Lyoo, B. C. Kim, and W. S. Ha, "Rheological and Rheo- Optical Properties of High Molecular Weight Syndiotactic and Atactic Polyvinylalcohol Solutions", Polym. Eng. Sci., 1997, 37, 1259-1265. https://doi.org/10.1002/pen.11770
  7. S. R. Sudhamani, M. S. Prasad, and K. U. Sankar, "DSC and FTIR Studies on Gellan and Poly(vinyl alcohol) (PVA) Blend Films", Food Hydrocolloids, 2003, 17, 245-250. https://doi.org/10.1016/S0268-005X(02)00057-7
  8. Z. Zhang and Q. Zhang, "Matrix Tailoring of Engineered Cementitious Composites (ECC) with Non-Oil-Coated, Low Tensile Strength PVA Fiber", Constr. Build. Mater., 2018, 161, 420-431. https://doi.org/10.1016/j.conbuildmat.2017.11.072
  9. Z. Ahmad, M. Abbas, I. Gunawan, R. A. Shakoor, F. Ubaid, and F. Touati, "Electro-Sprayed PVA Coating with Texture-Enriched Surface Morphology for Augmented Humidity Sensing", Prog. Org. Coat., 2018, 117, 7-9. https://doi.org/10.1016/j.porgcoat.2017.12.010
  10. J. B. Chang, S. B. Yuk, J. S. Park, and J. P. Kim, "Dichroic and Spectral Properties of Anthraquinone-Based Azo Dyes for PVA Polarizing Film", Dyes Pigm., 2011, 92, 737-744.
  11. X. Wu, A. Liu, W. Wang, and R. Ye, "Improved Mechanical Properties and Thermal-Stability of Collagen Fiber Based Film by Crosslinking with Casein, Keratin or SPI: Effect of Crosslinking Process and Concentrations of Proteins", Int. J. Biol. Macromol., 2018, 109, 1319-1328. https://doi.org/10.1016/j.ijbiomac.2017.11.144
  12. H. Wang, T. Shyr, and M. Hu, "The Elastic Property of Polyvinyl Alcohol Gel with Boric Acid as a Crosslinking Agent", J. Appl. Polym. Sci., 1999, 74, 3046-3052. https://doi.org/10.1002/(SICI)1097-4628(19991220)74:13<3046::AID-APP6>3.0.CO;2-1
  13. E. J. Lee, K. S. Dan, and B. C. Kim, "Rheological Characterization of Shear-Induced Structural Formation in the Solutions of Poly(vinyl alcohol) in Dimethyl Sulfoxide", J. Appl. Polym. Sci., 2006, 101, 465-471. https://doi.org/10.1002/app.23256
  14. E. J. Lee and B. C. Kim, "The Effects of Boric Acid on the Rheological Behavior of Time Dependent Structure Formation in PVA/DMSO Solutions", Fiber. Polym., 2013, 14, 2097-2102. https://doi.org/10.1007/s12221-013-2097-9
  15. J. H. Choi, S. W. Ko, B. C. Kim, J. Blackwell, and W. S. Lyoo, "Phase Behavior and Physical Gelation of High Molecular Weight Syndiotactic Poly(vinyl alcohol) Solution", Macromolecules, 2001, 34, 2964-2972. https://doi.org/10.1021/ma001710s
  16. S. I. Song and B. C. Kim, "Characteristic Rheological Features of PVA Solutions in Water Containing Solvents with Different Hydration States", Polymer, 2004, 45, 2381-2386. https://doi.org/10.1016/j.polymer.2004.01.057
  17. Y. H. Cho, K. S. Dan, and B. C. Kim, "Effects of Dissolution Temperature on the Rheological Properties of Poly(vinyl alcohol) Solutions in Dimethyl Sulfoxide", Korea-Aust. Rheol. J., 2008, 20, 73-77.