DOI QR코드

DOI QR Code

Influence of post-pouring joint on long-term performance of steel-concrete composite beam

  • Huang, Dunwen (School of Civil Engineering, Central South University) ;
  • Wei, Jun (School of Civil Engineering, Central South University) ;
  • Liu, Xiaochun (School of Civil Engineering, Central South University) ;
  • Zhang, Shizhuo (School of Civil Engineering, Central South University) ;
  • Chen, Tao (School of Civil Engineering, Central South University)
  • 투고 : 2018.02.12
  • 심사 : 2018.04.11
  • 발행 : 2018.07.10

초록

The concrete bridge decks are usually precast and in-situ assembled with steel girders with post-pouring joint in the construction practice of super-wide steel-concrete composite beam. But the difference of concrete age between the precast slabs and the post-pouring joint has been not yet considered for the long-term performance analysis of this kind composite beam. A simply supported precast-assembled T-shaped beam was taken as an example to analyze the long-term performance of steel-concrete composite beam with post-pouring joint. Based on the deformation coordination conditions of the old-new concrete deck and steel girder, a theoretical model for the long-term behavior of precast-assembled composite beam is proposed in this paper according to age-adjusted effective modulus method. Then, the feasibility of the proposed model is verified by the available test data from the Gilbert's composite beams. Parametric studies were preformed to evaluate the influences of the cross-sectional area ratio of the post-pouring joint to the whole bridge deck, as well as the difference of concrete age between the precast slabs and the post-pouring joint, on the long-term performance of the composite beam. The results indicate that the traditional method without considering the age difference would seriously underestimate the effect of creep and shrinkage of concrete bridge decks. The concrete age difference between the precast slabs and the post-pouring joint should be demonstrated for the life cycle design and long-term performance analysis of precast-assembled steel-concrete composite beams.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Al-Deen, S., Ranzi, G. and Vrcelj, Z. (2011a), "Shrinkage effects on the flexural stiffness of composite beams with solid concrete slabs: An experimental study", Eng. Struct., 33(4), 1302-1315. https://doi.org/10.1016/j.engstruct.2011.01.007
  2. Al-Deen, S., Ranzi, G. and Vrcelj, Z. (2011b), "Full-scale longterm experiments of simply supported composite beams with solid slabs", J. Constr. Steel Res., 67(3), 308-321. https://doi.org/10.1016/j.jcsr.2010.11.001
  3. Al-Deen, S., Ranzi, G. and Uy, B. (2015), "Non-uniform shrinkage in simply-supported composite steel-concrete slabs", Steel Compos. Struct., Int. J., 18(2), 375-394. https://doi.org/10.12989/scs.2015.18.2.375
  4. Amadio, C. and Fragiacomo, M. (1997), "Simplified Approach to Evaluate Creep and Shrinkage Effects in Steel-Concrete Composite Beams", J. Struct. Eng., 123(9), 1153-1162. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:9(1153)
  5. Bazant, Z.P. (1972), "Prediction of concrete creep effects using age-adjusted effective modulus method", ACI J., 69(4), 212-217.
  6. Deretic-Stojanovic, B. and Kostic, S.M. (2017), "A simplified matrix stiffness method for analysis of composite and prestressed beams", Steel Compos. Struct., Int. J., 24(1), 53-63. https://doi.org/10.12989/scs.2017.24.1.053
  7. Dezi, L., Leoni, G. and Tarantino, A.M. (1995), "Time-dependent analysis of prestressed composite beams", J. Struct. Eng., 121(4), 621-633. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:4(621)
  8. Dezi, L., Gara, F. and Leoni, G. (2006), "Effective slab width in prestressed twin-girder composite decks", J. Struct. Eng., 132(9), 1358-1370. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:9(1358)
  9. Erkmen, R.E. and Bradford, M.A. (2011), "Time-dependent creep and shrinkage analysis of composite beams curved in-plan", Comput. Struct., 89(1), 67-77. https://doi.org/10.1016/j.compstruc.2010.08.004
  10. Fan, J.S., Nie, J.Q. and Li, Q. (2010a), "Long-Term Behavior of Composite Beams under Positive and Negative Bending (I) -Experimental Study", J. Struct. Eng., 136(7), 849-857. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000175
  11. Fan, J.S., Nie, J.Q. and Quan, L. (2010b), "Long-Term Behavior of Composite Beams under Positive and Negative Bending (II) - Analytical Study", J. Struct. Eng., 136(7), 858-865. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000176
  12. Gara, F., Ranzi, G. and Leoni, G. (2010), "Short- and long-term analytical solutions for composite beams with partial interaction and shear-lag effects", Int. J. Steel Struct., 10(4), 359-372. https://doi.org/10.1007/BF03215844
  13. Gara, F., Ranzi, G. and Leoni, G. (2011a), "Partial interaction analysis with shear-lag effects of composite bridges: A finite element implementation for design applications", Adv. Steel Constr., 7(1), 1-16.
  14. Gara, F., Ranzi, G. and Leoni, G. (2011b), "Simplified method of analysis accounting for shear-lag effects in composite bridge decks", J. Constr. Steel Res., 67(10), 1684-1697. https://doi.org/10.1016/j.jcsr.2011.04.013
  15. Gilbert, R.I. (1989), "Time-dependent Analysis of Composite Steel-Concrete sections", J. Struct. Eng., 115(11), 2687-2705. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:11(2687)
  16. Gilbert, R.I. and Bradford, M.A. (1991), "Time-dependent behavior of simply-supported steel-concrete composite beams", Magaz. Concrete Res., 157(43), 265-274.
  17. Giussani, F. and Mola, F. (2010), "Displacement Method for the Long-Term Analysis of Steel-Concrete Beams with Flexible Connection", J. Struct. Eng., 136(3), 265-274. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000109
  18. Jurkiewiez, B., Buzon, S. and Sieffert, J.G. (2005), "Incremental viscoelastic analysis of composite beams with partial interaction", Comput. Struct., 83(21), 1780-1791. https://doi.org/10.1016/j.compstruc.2005.02.021
  19. Nguyen, Q.H. and Hjiaj, M. (2016), "Nonlinear Time-Dependent Behavior of Composite Steel-Concrete Beams", J. Struct. Eng., 142(5), 04015175. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001432
  20. Nguyen, Q.H., Hjiaj, M. and Aribert, J.M.A. (2010a), "space-exact beam element for time-dependent analysis of composite members with discrete shear connection", J. Constr. Steel Res., 66(11), 1330-1338. https://doi.org/10.1016/j.jcsr.2010.04.007
  21. Nguyen, Q.H., Hjiaj, M. and Uy, B. (2010b), "Time-dependent analysis of composite beams with continuous shear connection based on a space-exact stiffness matrix", Eng. Struct., 32(9), 2902-2911. https://doi.org/10.1016/j.engstruct.2010.05.009
  22. Wu, J., Dan, M.F. and Soliman, M. (2015), "Simulating the construction process of steel-concrete composite bridges", Steel Compos. Struct., Int. J., 18(5), 1239-1258. https://doi.org/10.12989/scs.2015.18.5.1239
  23. Xue, W.C., Ding, M., He, C. and Li, J. (2008), "Long-term behavior of prestressed composite beams at service loads for one year", J. Struct. Eng., 134(6), 930-937. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:6(930)
  24. Xue, W.C., Sun, T.R. and Liu, T. (2013), "Experimental study on prestressed steel-concrete composite beams for urban light rails under sustained loads of two years", China Civil Eng. J., 46(3), 110-118. [In Chinese]
  25. Zhu, L. and Su, R.K.L. (2017), "Analytical solutions for composite beams with slip, shear-lag and time-dependent effects", Eng. Struct., 152, 559-578. https://doi.org/10.1016/j.engstruct.2017.08.071

피인용 문헌

  1. Long-term deflection prediction in steel-concrete composite beams vol.39, pp.1, 2021, https://doi.org/10.12989/scs.2021.39.1.021