Journal of the Korea Society for Simulation (한국시뮬레이션학회논문지)

The Korea Society for Simulation (한국시뮬레이션학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Improvement in the Resistance Performance of Planing hulls by Hull Shape Optimization

고속활주선의 선형 최적화를 통한 저항성능 개선에 관한 연구

  • Received : 2018.03.27
  • Accepted : 2018.06.06
  • Published : 2018.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes the method of hull shape optimization to improve the resistance performance of planing hulls when a reference hull shape and its principal dimensions are given. First, the planing hull of precedent research is adopted as the reference hull and an optimization problem is formulated by defining hull shape parameters. The search space of this research is discretized for computing cost and DPSO(Discrete binary version of Particle Swarm Optimization) method is used to solve the optimization problem. As the result of optimization, the decrease of resistance is confirmed from the comparison between the reference hull's and the modified hull's planing performance from computational results.

본 연구에서는 선형의 기본 파라메타가 주어졌을 때, 선형 최적화를 통하여 고속으로 주행하는 활주선의 저항성능을 개선하는 기법을 제안하였다. 먼저 선행연구 된 활주선형을 기준 선형으로 채택한 뒤, 선형 변경지점을 정의해 설계변수로 하여 최적화 문제를 수립하였다. 계산 효율을 위하여 탐색공간을 이산화하고, 최적화 문제를 풀기위하여 DPSO(Discrete binary version of Particle Swarm Optimization) 알고리즘을 사용하였다. 최적화 수행 후 기준 선형과 수정 선형의 목적함수 출력의 비교를 수행하였고, 이를 통해 고속영역에서의 저항성능의 개선을 확인하였다.

Keywords

References

  1. Dong jin Kim et al., (2014), "Effects of hull form variations on resistance and seakeeping performance of planing hulls with and without incoming regular waves", Journal of the Society of Naval Architects of Korea, Vol. 51, No. 5, pp. 369-379. https://doi.org/10.3744/SNAK.2014.51.5.369
  2. Dong jin Kim et al., (2016), Hydrodynamic performance prediction method for multi-purpose intellectual USV, Technology transfer service for hydrodynamic performance of high-speed ship hull, Korea Research Institute of Ships & Ocean engineering. (다목적 지능형 무인선 유체성능 추정 기술, 고속 선형 유체성능해석 기술이전용역, 선박해양플랜트연구소)
  3. Jong-gu Kang (2017), "A Study on an Arrangement of Passive Sonars by using DPSO Algorithm", Journal of the Korea Society for Simulation, Vol. 26, NO. 1, pp. 39-46. https://doi.org/10.9709/JKSS.2017.26.1.039
  4. J. Kennedy and R. Eberhart (1995), Particle swarm optimization, Proc. IEEE Int. Conf. Neural Networks, pp. 1942-1948.
  5. J. Kennedy and R. Eberhart (1997), A discrete binary version of the particles swarm algorithm, Proceedings of the IEEE international conference on Systems, Man and Cybernetics, pp. 4104-4108, IEEE press
  6. K.H. Kim, K.H. Lee and S.W. Baek (2012), A Study on grooved wick heat pipe optimization using PSO algorithm, Conference Proceeding of Korean Society for Computational Fluids Engineering, pp. 339-342.
  7. Pinto A., Peri D. and Campana E.F., (2007), Multiobjective optimization of a containership using deterministic particle swarm optimization, Journal of Ship Research, 51, pp 217-228
  8. Savitsky D., (1964), "Hydrodynamic design of planing hull. Marine Technology, 1(1), pp. 71-96
  9. Savitsky D. Delorme, M.F. and Datla, R., (2007), Inclusion of whisker spray drag in performance prediction method for high-speed planing hulls. Marine Technology, 44(1), pp. 35-56.
  10. Savitsky D., (2012), The effect of bottom warp on the performance of planing hulls. Proceedings of 3rd Chesapeake Powerboat Symposium, Annapolis, Maryland, USA, 15-16 June 2012, pp. 1-40.
  11. Sunbum Kim et al., (2013), "A Study on Modified PSO for the Optimization of Stochastic Simulations", Journal of the Korea Society for Simulation, Vol. 22, No. 4, pp. 21-28. https://doi.org/10.9709/JKSS.2013.22.4.021