DOI QR코드

DOI QR Code

Sensor clustering technique for practical structural monitoring and maintenance

  • Celik, Ozan (Department of Civil Environmental and Construction Engineering, University of Central Florida) ;
  • Terrell, Thomas (Department of Civil Environmental and Construction Engineering, University of Central Florida) ;
  • Gul, Mustafa (Department of Civil and Environmental Engineering, University of Alberta) ;
  • Catbas, F. Necati (Department of Civil Environmental and Construction Engineering, University of Central Florida)
  • 투고 : 2018.02.06
  • 심사 : 2018.04.24
  • 발행 : 2018.06.25

초록

In this study, an investigation of a damage detection methodology for global condition assessment is presented. A particular emphasis is put on the utilization of wireless sensors for more practical, less time consuming, less expensive and safer monitoring and eventually maintenance purposes. Wireless sensors are deployed with a sensor roving technique to maintain a dense sensor field yet requiring fewer sensors. The time series analysis method called ARX models (Auto-Regressive models with eXogeneous input) for different sensor clusters is implemented for the exploration of artificially induced damage and their locations. The performance of the technique is verified by making use of the data sets acquired from a 4-span bridge-type steel structure in a controlled laboratory environment. In that, the free response vibration data of the structure for a specific sensor cluster is measured by both wired and wireless sensors and the acceleration output of each sensor is used as an input to ARX model to estimate the response of the reference channel of that cluster. Using both data types, the ARX based time series analysis method is shown to be effective for damage detection and localization along with the interpretations and conclusions.

키워드

과제정보

연구 과제 주관 기관 : National Science Foundation (NSF), Federal Highway Administration (FHWA)

참고문헌

  1. Agha, G. and Spencer, B.F. (2011), "Getting started for advanced users and developers", Setting up the Imote2 Development Environment for TinyOS 1.x and Installing the ISHMP Services Toolsuite
  2. Aktan, A.E., Catbas, F.N., Grimmelsman, K.A. and Tsikos C.J. (2000), "Issues in infrastructure health monitoring for management", J. Eng. Mech. - ASCE, 126(7), 711-724. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:7(711)
  3. Brownjohn, J.M.W., Tjin, S.C., Tan, G.H. and Tan, B.L. (2004), "A structural health monitoring paradigm for civil infrastructure", Proceedings of the 1st FIG International Symposium on Engineering Surveys for Construction Works and Structural Engineering, Nottingham, UK.
  4. Catbas, F.N., Brown, D.L. and Aktan, A.E. (2004), "Parameter estimation for multiple-input multiple-output modal analysis of large structures", J. Eng. Mech. - ASCE, 130(8), 921-930. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:8(921)
  5. Catbas, F.N., Gul, M., Zaurin R., Gokce, H.B., Terrell, T., Dumlupinar, T. and Maier, D. (2010), "Long term bridge maintenance monitoring demonstration on a movable bridge", A Framework for Structural Health Monitoring of Movable Bridges, Florida Department of Transportation (FDOT).
  6. Catbas, F.N., Gul, M., Zaurin, R., Terrel, T., Dere, Y., Ansley M., Frangopol D.M.,and Grimmelsman K. (2009), "Structural health monitoring for the safety of bridges: Fundamental", Proceedings of the Application and Organizational Considerations, ASCE Structures Congress '09, Austin, TX.
  7. Dessi, D. and Camerlengo, G. (2015), "Damage identification techniques via modal curvature analysis: Overview and comparison", Mech. Syst. Signal Pr., 52-53, 181-205. https://doi.org/10.1016/j.ymssp.2014.05.031
  8. Farinholt, K.M., Miller, N., Sifuentes, W., MacDonald, J., Park, G. and Farrar, C.R. (2010), "Energy harvesting and wireless energy transmission for embedded SHM sensor nodes", Struct. Health Monit., 9(3), 269-280. https://doi.org/10.1177/1475921710366647
  9. Farrar, C.R. and Worden, K. (2007), "An introduction to structural health monitoring", Philos. T. Roy. Soc. A, 365, 303-315. https://doi.org/10.1098/rsta.2006.1928
  10. Gillich, G.R. and Praisach, Z.I. (2014), "Modal identification and damage detection in beam-like structures using the power spectrum and time-frequency analysis", Signal Process., 96, 29-44. https://doi.org/10.1016/j.sigpro.2013.04.027
  11. Gul, M. (2009), Investigation of damage detection methodologies for structural health monitoring, PhD Dissertation, Department of Civil, Environmental and Construction Engineering. University of Central Florida, Orlando, FL.
  12. Gul, M. and Catbas, F.N. (2008), "Ambient vibration data analysis for structural identification and global condition assessment", J. Eng. Mech., 134(8), 650-662. https://doi.org/10.1061/(ASCE)0733-9399(2008)134:8(650)
  13. Gul, M., Catbas, F.N. (2009), "A novel time series analysis methodology for damage assessment", Proceedings of the 5th International Workshop on Advanced Smart Materials and Smart Structures Technology, ANCRISST 2009. Boston, MA.
  14. Gul, M. and Catbas, F.N. (2011), "Structural health monitoring and damage assessment using a novel time series analysis methodology with sensor clustering", J. Sound Vib., 330(6), 1196-1210. https://doi.org/10.1016/j.jsv.2010.09.024
  15. Jang, S. and Rice, J. (2009), Calibration Guide for Wireless Sensors.
  16. Ljung, L. (1999), System Identification: Theory for the User. Upper Saddle River, NJ, Prentice-Hall.
  17. Lu, Y. and Gao, F. (2005), "A novel time-domain auto-regressive model for structural damage diagnosis", J. Sound Vib., 283, 1031-1049. https://doi.org/10.1016/j.jsv.2004.06.030
  18. Lynch, J.P. (2007), "An overview of wireless structural health monitoring for civil structures", Philos. T. Roy. Soc. A , 365(1851), 345-372. https://doi.org/10.1098/rsta.2006.1932
  19. Lynch, J.P., Law, K.H., Kiremidjian, A. S., Carryer, E., Farrar, C.R., Sohn, H., Allen, D.W., Nadler, B. and Wait, J.R. (2004), "Design and performance validation of a wireless sensing unit for structural monitoring applications", Struct. Eng. Mech., 17(3-4), 393-408. https://doi.org/10.12989/sem.2004.17.3_4.393
  20. Lynch, J.P., Wang, Y., Sundararajan, A., Law, K.H. and Kiremidjian, A.S. (2004), "Wireless sensing for structural health monitoring of civil structures", Proceedings of the International Workshop on Integrated Life-Cycle Management of Infrastructures, Hong Kong.
  21. Omenzetter, P. and Brownjohn, J.M.W. (2006), "Application of time series analysis for bridge monitoring", Smart Mater. Struct., 15, 129-138. https://doi.org/10.1088/0964-1726/15/1/041
  22. Pakzad, S.N. and Fenves, G.L. (2009), "Statistical analysis of vibration modes of a suspension bridge using spatially dense wireless sensor network", J. Struct. Eng., 135(7), 863-872. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000033
  23. Sazonov, E., Krishnamurthy, V. and Schilling, R. (2010), "Wireless intelligent sensor and actuator networka scalable platform for time-synchronous applications of structural health monitoring", Struct. Health Monit., 9(5), 465-476. https://doi.org/10.1177/1475921710370003
  24. Sohn, H., Czarnecki, J.A. and Farrar, C.R. (2000), "Structural health monitoring using statistical process control", J. Struct. Eng.- ASCE , 126(11), 1356-1363. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:11(1356)
  25. Sohn, H. and Farrar, C.R. (2001), "Damage diagnosis using time series analysis of vibration signals", Smart Mater. Struct., 10(3), 446. https://doi.org/10.1088/0964-1726/10/3/304
  26. Spencer, B.F. (2011), "Getting started guide for new users", Programming the ISHMP Toolsuite V3.0 and Collecting Data with Imote2s.
  27. Spencer, B.F. (2011), ""Imote2 for structural health monitoring: User's guide", Illinois Structural Health Montitoring Project.
  28. Tanner, N.A., Wait, J.R., Farrar, C.R. and Sohn, H. (2003), "Structural health monitoring using modular wireless sensors", J. Intel. Mat. Syst. Str., 14(1), 43-56. https://doi.org/10.1177/1045389X03014001005
  29. Zaurin, R. (2009), Structural health monitoring with emphasis on computer vision, damage indices and statistical analysis, Ph.D. Dissertation, Civil, Environmental and Construction Engineering Dept. Orlando, FL.
  30. Zheng, H. and Mita A. (2009), "Localized damage detection of structures subject to multiple ambient excitations using two distance measures for autoregressive models", Struct. Health Monit., 8(3), 207-222. https://doi.org/10.1177/1475921708102145

피인용 문헌

  1. A semi-automated method for integrating textural and material data into as-built BIM using TIS vol.5, pp.2, 2018, https://doi.org/10.12989/acd.2020.5.2.127