DOI QR코드

DOI QR Code

Numerical and experimental investigation for damage detection in FRP composite plates using support vector machine algorithm

  • Shyamala, Prashanth (Department of Civil Engineering, Indian Institute of Technology Kharagpur) ;
  • Mondal, Subhajit (Department of Civil Engineering, National Institute of Technology Rourkela) ;
  • Chakraborty, Sushanta (Department of Civil Engineering, Indian Institute of Technology Kharagpur)
  • Received : 2018.01.18
  • Accepted : 2018.05.07
  • Published : 2018.06.25

Abstract

Detection of damages in fibre reinforced plastic (FRP) composite structures is important from the safety and serviceability point of view. Usually, damage is realized as a local reduction of stiffness and if dynamic responses of the structure are sensitive enough to such changes in stiffness, then a well posed inverse problem can provide an efficient solution to the damage detection problem. Usually, such inverse problems are solved within the framework of pattern recognition. Support Vector Machine (SVM) Algorithm is one such methodology, which minimizes the weighted differences between the experimentally observed dynamic responses and those computed using the finite element model- by optimizing appropriately chosen parameters, such as stiffness. A damage detection strategy is hereby proposed using SVM which perform stepwise by first locating and then determining the severity of the damage. The SVM algorithm uses simulations of only a limited number of damage scenarios and trains the algorithm in such a way so as to detect damages at unknown locations by recognizing the pattern of changes in dynamic responses. A rectangular fiber reinforced plastic composite plate has been investigated both numerically and experimentally to observe the efficiency of the SVM algorithm for damage detection. Experimentally determined modal responses, such as natural frequencies and mode shapes are used as observable parameters. The results are encouraging since a high percentage of damage cases have been successfully determined using the proposed algorithm.

Keywords

References

  1. ABAQUS v6.10 (2010), Dassault Systemes Simulia Corp.
  2. Abderahmane, S., Mokhtar, B.M., Smail, B., Wayne, S.F., Zhang, L., Belabbes, B.B. and Boualem, S. (2017), "Experimental and numerical disbond localization analyses of a notched plate repaired with a CFRP patch", Struct. Eng. Mech., 63(3), 361-370. https://doi.org/10.12989/SEM.2017.63.3.361
  3. Bai, R.B., Ostachowicz, W., Cao, M.S. and Su, Z. (2014), "Crack detection in beams in noisy conditions using scale fractal dimension analysis of mode shapes", Smart Mater. Struct., 23, 065014. (10pp). doi:10.1088/0964-1726/23/6/065014.
  4. Barthorpe, R.J. and Worden, K. (2011), "Classification of multi-site damage using support vector machines", J. Phys.: Conference Series, 305(1), 012059. https://doi.org/10.1088/1742-6596/305/1/012059
  5. Bornn, L., Farrar, C.R., Park, G. and Farinholt, K. (2009), "Structural health monitoring with autoregressive support vector machines", J. Vib. Acoust., 131(2), 021004. https://doi.org/10.1115/1.3025827
  6. Carden, E.P. and Fanning, P. (2004), "Vibration based condition monitoring: A review", Struct. Health Monit., 3(4), 355-377, DOI: 10.1177/1475921704047500
  7. Carraro, P.A. and Quaresimin, M. (2015), "A stiffness degradation model for cracked multidirectional laminates with cracks in multiple layers", Int. J. Solids Struct., 58, 34-51. https://doi.org/10.1016/j.ijsolstr.2014.12.016
  8. Cevik, A., Kortoglu, A.E., Bilgehan, M., Gulsan, M.E. and Albegmprli, H.M. (2015), "Support vector machines in structural engineering: a review", J. Civil Eng. Management, 21(3), 261-281. https://doi.org/10.3846/13923730.2015.1005021
  9. Chiachio, J., Bochud, N., Chiachio, M., Cantero, S. and Rus, G. (2017), "A multilevel Bayesian method for ultrasound-based damage identification in composite laminates", Mech. Syst. Signal Pr., 88, 462-477 https://doi.org/10.1016/j.ymssp.2016.09.035
  10. Daniel, I.M. and Ishai, O. (2005), Engineering Mechanics of Composite Materials 2nd Ed., Oxford University Press, USA.
  11. Das, S., Srivastava, A.N. and Chattopadhyay, A. (2007), "Classification of damage signatures in composite Plates using one-class SVMs", IEEE Aerospace Conference, 1-19. doi:10.1109/AERO.2007.352912.
  12. Doebling, S.W., Farrar, C.R. and Prime, M.B. (1998), "A summary review of vibration based damage identification methods", Shock Vib. Digest, 30(2), 91-105. https://doi.org/10.1177/058310249803000201
  13. Farooq, M., Zheng, H., Nagabhushana, A., Roy, S., Burkett, S., Barkey, M., Kotru, S. and Sazonov, E. (2012), "Damage detection and identification in smart structures using SVM and ANN", Proceedings of SPIE - The International Society for Optical, 8346:40, doi: 10.1117/12.915189.
  14. Farrar, C.R. and Worden, K. (2012), Structural health monitoring: A machine learning perspective, Wiley Publications, ISBN: 978-1-119-99433-6.
  15. Garcia-Palencia, A., Santini-Bell, E., Mustafa Gul, M. and Catbas, N. (2015), "A FRF-based algorithm for damage detection using experimentally collected data", Struct. Monit. Maint., 2(4), 399-418. https://doi.org/10.12989/SMM.2015.2.4.399
  16. Garcia, D. and Trendafilova, I. (2015), "A multivariate data analysis approach towards Vibration analysis and vibration-based damage assessment: Application for delamination detection in a composite beam", J. Sound Vib., 338, 76-90 https://doi.org/10.1016/j.jsv.2014.11.031
  17. Goni, S.A., Mondal, S. and Chakraborty, S. (2015), "A new gradient based step size controlled inverse eigen sensitivity algorithm for identification of material and boundary parameters of plates", J. Vib. Control, 1-15.
  18. Gunn, S.R. (1998), Support vector machines for classification and regression Technical report, Image Speech & Intelligent Systems Group, University of Southampton UK.
  19. Gupta, S., Satpal, S.B., Banerjee, S. and Guha A. (2016), "Vibration based health monitoring of honey comb core sandwich panels using support vector machine", Int. J. Smart Sens. Intell. Syst., 9(1), 215-232.
  20. Harizi, W., Chaki, S., Bourse, G. and Ourak, M. (2015), "Mechanical damage characterization of glass fiber-reinforced polymer laminates by ultrasonic maps", Compos.: Part B, 70 ,131-137 https://doi.org/10.1016/j.compositesb.2014.11.014
  21. He, H.X. and Yan, W.M. (2007), "Structural damage detection with wavelet support vector machine: Introduction and applications", Struct. Control Health Monit., 14, 162-176. DOI: 10.1002/stc.150.
  22. He, M., Yang, T. and Du, Y. (2017), "Non-destructive identification of composite beams damage based on the curvature mode difference", Compos.Struct., 176, 178-186. https://doi.org/10.1016/j.compstruct.2017.05.040
  23. Kim, Y., Chong, J.W., Chon, K.H. and Kim, J. (2012), "Wavelet-based AR-SVM for health monitoring of smart structures", Smart Mater. Struct., 22(1), 015003. https://doi.org/10.1088/0964-1726/22/1/015003
  24. Li, H.N., Yi, T.H., Ren, L., Li, D.S. and Huo, L.S. (2014),"Reviews on innovations and applications in structural health monitoring for infrastructures", Struct. Monit. Maint., 1(1),1-45. https://doi.org/10.12989/SMM.2014.1.1.001
  25. Mondal, S. and Chakraborty, S. (2014), "Identification of material parameters of pultruded FRP Composite plates using finite element model updating", Proceedings of the 58th Congress (an international conference) of Indian Society of Theoretical and Applied Mechanics (ISTAM) , IIEST Shibpur, India, December.
  26. Mondal, S. and Chakraborty, S. (2016), "Identification of in-plane and out-of-plane elastic parameters of orthotropic composite structures", Proceedings of the 23rd International Congress on Sound and Vibration, ICSV23, Athens (Greece), 10-14 July.
  27. Mondal, S. and Chakraborty, S., Mitra, N. (2016), "Estimation of elastic parameters of sandwich composite plates using a gradient based finite element model updating approach", Proceedings of the Conferences on Smart Materials, Adaptive Structures and Intelligent Systems (ASME 2016 SMASIS), Stowe, Vermont, USA, September 28-30.
  28. Nagarajaiah, S. and Erazo, K., (2016), "Structural monitoring and identification of civil infrastructure in the United States", Struct. Monit. Maint., 3(1), 51-69. DOI: 10.12989/smm.2016.3.1.051.
  29. Nello, C. and Taylor, J.S. (2000), An introduction to support vector machines and other kernel-based learning methods , Cambridge university press, ISBN: 9780521780193.
  30. Park, S., Inman, D.J., Lee, J.J. and Yun, C.B. (2008), "Piezoelectric sensor-based health monitoring of railroad tracks using a two-step support vector machine classifier", J. Infrastruct. Syst., 14(1), 80-88. https://doi.org/10.1061/(ASCE)1076-0342(2008)14:1(80)
  31. Rother, A., Jelali, M. and Soffker, D. (2014), "Development of a fault detection approach based on SVM", Applied to Industrial Data Le Cam, Vincent and Mevel, Laurent and Schoefs, Franck. EWSHM - 7th European Workshop on Structural Health Monitoring, Nantes, France, July.
  32. Salawu, O.S. and Williams, C. (1994), "Damage location using vibration mode shapes", Proceedings of the 12th International Modal analysis Conference, 2251, 933-941.
  33. Sampaio, R. and Chan, T.H.T, (2015), "Modal parameters identification of heavy-haul railway RC bridges - experience acquired", Struct. Monit. Maint., 2(1), 1-18. DOI: 10.12989/smm.2015.2.1.001
  34. Satpal, S.B., Guha, A. and Banerjee, S. (2015), "Damage identification in aluminium beams using support vector machine: Numerical and experimental studies", Struct. Control Health Monit, DOI: 10.1002/stc.1773
  35. Satpal, S.B., Khandare, Y., Banerjee, S. and Guha, A. (2013), "Application of support vector machine in health monitoring of plate structures", Proceedings of the 2013 World Congress, Advance in Structural Engineering and Mechanics(ASEM13), Jeju, Korea, 8-12.
  36. Shyamala, P., Mondal, S. and Chakraborty, S. (2016), "Detection of damage in beam from measured natural frequencies using support vector machine algorithm", Advance in Dynamics, Vibration and Control, 06-310, Narosa Publishing House, New Delhi.
  37. Sohn, H., Farrar, C.R., Hunter, N.F. and Worden, K. (2001), "Structural health monitoring using statistical pattern recognition techniques", J. Dynam. Syst. Measure.Control, 123(4), 706-711. https://doi.org/10.1115/1.1410933
  38. Soleimanpour, R. and Ng, C.T. (2017), "Locating delaminations in laminated composite beams using nonlinear guided waves", Eng. Struct., 131, 207-219. https://doi.org/10.1016/j.engstruct.2016.11.010
  39. Vapnik, V. (2000), "The nature of statistical learning theory", Information science and statistics, Springer, 2nd Ed.
  40. Yang, C. and Oyadiji, S.O. (2017), "Delamination detection in composite laminate plates using 2D wavelet analysis of modal frequency surface", Comput. Struct., 179, 109-126. https://doi.org/10.1016/j.compstruc.2016.10.019
  41. Zhang, Z., Shankar, K., Ray, T., Morozov, E.V. and Tahtali, M. (2013), "Vibration-based inverse algorithms for detection of delamination in composites", Compos. Struct., 102, 226-236. https://doi.org/10.1016/j.compstruct.2013.03.012
  42. Zhang, Z., Zhan, C., Shankar, K., Morozov, E.V., Singh, H.K. and Ray, T. (2017), "Sensitivity analysis of inverse algorithms for damage detection in composites", Compos. Struct., 176, 844-859 https://doi.org/10.1016/j.compstruct.2017.06.019

Cited by

  1. Numerical forced vibration analysis of compositionally gradient porous cylindrical microshells under moving load and thermal environment vol.40, pp.6, 2021, https://doi.org/10.12989/scs.2021.40.6.893