DOI QR코드

DOI QR Code

An innovative BRB with viscoelastic layers: performance evaluation and numerical simulation

  • Zhou, Ying (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University) ;
  • Gong, Shunming (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University) ;
  • Hu, Qing (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University) ;
  • Wu, Rili (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University)
  • Received : 2017.11.02
  • Accepted : 2017.11.24
  • Published : 2018.06.25

Abstract

Energy induced by minor earthquake and micro vibration cannot be dissipated by traditional buckling-restrained braces (BRBs). To solve this problem, a new type of hybrid passive control device, named as VE-BRB, which is configured by a BRB with high-damping viscoelastic (VE) layers, is developed and studied. Theoretical analysis, performance tests, numerical simulation and case analysis are conducted to study the seismic behavior of VE-BRBs. The results indicate that the combination of hysteretic and damping devices lead to a multi-phased nature and good performance. VE-BRB's working state can be divided into three phases: before yielding of the steel core, VE layers provide sufficient damping ratio to mitigate minor vibrations; after yielding of the steel core, the steel's hysteretic deformations provide supplemental dissipative capacity for structures; after rupture of the steel core, VE layers are still able to work normally and provide multiple security assurance for structures. The simulation results agreed well with the experimental results, validating the finite element analysis method, constitutive models and the identified parameters. The comparison of the time history analysis on a 6-story frame with VE-BRBs and BRBs verified the advantages of VE-BRB for seismic protection of structures compared with traditional BRB. In general, VE-BRB had the potential to provide better control effect on structural displacement and shear in all stages than BRB as expected.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China

References

  1. Andersson, B.L., Andersson, P. and Lundwall, J. (2010), Abaqus/CAE 6.7 User's manual, Computers Structures.
  2. ANSI/AISC 341-10 (2010), Seismic provision of structural steel buildings, American Institute of Steel Construction; Chicago, USA.
  3. Apostolakis, G. and Dargush, G.F. (2010), "Optimal seismic design of moment-resisting steel frames with hysteretic passive devices", Earthq. Eng. Struct. D., 39(4), 355-376. https://doi.org/10.1002/eqe.944
  4. Bazaez, R. and Dusicka, P. (2016), "Cyclic behavior of reinforced concrete bridge bent retrofitted with buckling restrained braces", Eng. Struct., 119, 34-48. https://doi.org/10.1016/j.engstruct.2016.04.010
  5. Bozkurt, M.B. and Topkaya, C. (2016), "Development of welded overlap core steel encased buckling-restrained braces", J. Constr. Steel Res., 127, 151-164. https://doi.org/10.1016/j.jcsr.2016.07.034
  6. Chang, K.C., Lai, M.L., Soong, T.T., Hao, D.S. and Yeh, Y.C. (1993), "Seismic behavior and design guidelines for steel frame structures with added viscoelastic dampers", Research Report No. NCEER-93-0009; National Center for Earthquake Engineering Research, Buffalo, NY, USA.
  7. Chou, C.C., Tsai, W.J. and Chung, P.T. (2016), "Development and validation tests of a dual-core self-centering sandwiched buckling-restrained brace (SC-SBRB) for seismic resistance", Eng. Struct., 121, 30-41. https://doi.org/10.1016/j.engstruct.2016.04.015
  8. Di Sarno, L. and Manfredi, G. (2012), "Experimental tests on full-scale RC unretrofitted frame and retrofitted with buckling-restrained braces", Earthq. Eng. Struct. D., 41(2), 315-333. https://doi.org/10.1002/eqe.1131
  9. El-Bahey, S. and Bruneau, M. (2011), "Buckling restrained braces as structural fuses for the seismic retrofit of reinforced concrete bridge bents", Eng. Struct., 33(3), 1052-1061. https://doi.org/10.1016/j.engstruct.2010.12.027
  10. GB 50011-2010 (2010), Code for seismic design of buildings, China Architecture Building Press; Beijing, China. (in Chinese).
  11. Gong, S.M. and Zhou, Y. (2017), "Experimental study and numerical simulation on a new type of viscoelastic damper with strong nonlinear characteristics", Struct. Control Health., 24, e1897. https://doi.org/10.1002/stc.1897
  12. Guneyisi, E.M. (2012), "Seismic reliability of steel moment resisting framed buildings retrofitted with buckling restrained braces", Earthq. Eng. Struct. D., 41(5), 853-874. https://doi.org/10.1002/eqe.1161
  13. Guo, Z. (2007), "Seismic performance analysis of steel frame with BRBs. PhD Thesis", Ph.D. Dissertation; Harbin Institute of Technology, Harbin, China. (in Chinese).
  14. Khoo, H.H., Tsai, K.C., Tsai, C.Y., Tsai, C.Y. and Wang, K.J. (2016), "Bidirectional substructure pseudo-dynamic tests and analysis of a full-scale two-story buckling-restrained braced frame", Earthq. Eng. Struct. D., 45(7), 1085-1107. https://doi.org/10.1002/eqe.2696
  15. Lee, H.S., Lee, K.B., Hwang, K.R. and Cho, C.S. (2013), "Shake table responses of an RC low-rise building model strengthened with buckling restrained braces at ground story", Earthq. Struct., 5(6), 703-731. https://doi.org/10.12989/eas.2013.5.6.703
  16. Lin, P.C., Tsai, K.C., Chang, C.A., Hsiao, Y.Y. and Wu, A.C. (2016), "Seismic design and testing of buckling-restrained braces with a thin profile", Earthq. Eng. Struct. D., 45(3), 339-358. https://doi.org/10.1002/eqe.2660
  17. Mahrenholtz, C., Lin, P.C., Wu, A.C., Tsai, K.C., Hwang, S.J., Lin, R.Y. and Bhayusukma, M.Y. (2015), "Retrofit of reinforced concrete frames with buckling-restrained braces", Earthq. Eng. Struct. D., 44(1), 59-78. https://doi.org/10.1002/eqe.2458
  18. Marshall, J.D. and Charney, F.A. (2012). "Seismic Response of Steel Frame Structures with Hybrid Passive Control Systems", Earthq. Eng. Struct. D., 41(4), 715-733. https://doi.org/10.1002/eqe.1153
  19. Merritt, S., Uang, C.M. and Benzoni, G. (2003), "Subassemblage testing of star seismic buckling-restrained braces", Research Report No. TR-2003.
  20. Pratap, R., Mukherjee, S. and Moon, F.C. (1994), "Dynamic behavior of a bilinear hysteretic elasto-plastic oscillator, part I: free oscillations", J. Sound Vib., 172(3), 321-337. https://doi.org/10.1006/jsvi.1994.1178
  21. Shimizu, T., Fujisawa, K. and Uemura, K. (2001), "Study on hysteresis behavior of double tube steel bracing: part 2 plan of cyclic loading test of double tube steel bracing", Summaries of Technical Papers of Meeting Architectural Institute of Japan, Architectural Institute of Japan; Tokyo, Japan.
  22. Usami, T., Wang, C.L. and Funayama, J. (2012), "Developing high-performance aluminum alloy buckling-restrained braces based on series of low-cycle fatigue tests", Earthq. Eng. Struct. D., 41(4), 643-661. https://doi.org/10.1002/eqe.1149
  23. Vargas, R. and Bruneau, M. (2009), "Analytical response and design of buildings with metallic structural fuses I", J. Struct. Eng., 135(4), 386-393. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:4(386)
  24. Wei, X.N. and Bruneau, M. (2016), "Case Study on Applications of Structural Fuses in Bridge Bents", J. Bridge. Eng., 21(7), 1-15.
  25. Zhang, D.B., Nie, X., Pan, P., Wang, M.Z., Deng, K.L. and Chen, Y.B. (2016), "Experimental study and finite element analysis of a buckling-restrained brace consisting of three steel tubes with slotted holes in the middle tube", J. Constr. Steel Res., 124, 1-11. https://doi.org/10.1016/j.jcsr.2016.05.003
  26. Zhao, J.X. (2012), "Seismic behavior and stability design methods of buckling restrained braces", Ph.D. Dissertation; Harbin Institute of Technology, Harbin, China. (in Chinese).
  27. Zhao, J.X., Wu, B. and Ou, J.P. (2011), "A novel type of angle steel buckling-restrained brace: Cyclic behavior and failure mechanism", Earthq. Eng. Struct. D., 40(10), 1083-1102. https://doi.org/10.1002/eqe.1071
  28. Zhao, J.X., Wu, B. and Ou, J.P. (2012), "Effect of brace end rotation on the global buckling behavior of pin-connected buckling-restrained braces with end collars", Eng. Struct., 40(7), 240-253. https://doi.org/10.1016/j.engstruct.2012.02.030
  29. Zhao, J.X., Wu, B. and Ou, J.P. (2013), "Global stability design method of buckling-restrained braces considering end bending moment transfer: Discussion on pinned connections with collars", Eng. Struct., 49(2), 947-962. https://doi.org/10.1016/j.engstruct.2012.12.042
  30. Zhou, Y. and Chen, P. (2017), "Shaking table tests and numerical studies on the effect of viscous dampers on an isolated RC building by friction pendulum bearings", Soil Dyn. Earthq. Eng., 100, 330-344. https://doi.org/10.1016/j.soildyn.2017.06.002
  31. Zhou, Y., Lu, X.L., Weng, D.G. and Zhang, R.F. (2012), "A practical design method for reinforced concrete structures with viscous dampers", Eng. Struct., 39, 187-198. https://doi.org/10.1016/j.engstruct.2012.02.014
  32. Zhou, Y., Zhang, C.Q. and Lu, X.L. (2017), "Seismic performance of a damping outrigger system for tall buildings", Struct. Control Health., 24, e1864. https://doi.org/10.1002/stc.1864