DOI QR코드

DOI QR Code

Modeling of ultimate value and kinetic of compressive strength and hydration heat of concrete made with different replacement rates of silica fume and w/b ratios

  • Djezzar, Mahdjoub (Laboratory Geomaterials, University Hassiba Benbouali of Chlef) ;
  • Ezziane, Karim (Laboratory Geomaterials, University Hassiba Benbouali of Chlef) ;
  • Kadri, Abdelkader (Laboratory Geomaterials, University Hassiba Benbouali of Chlef) ;
  • Kadri, El-Hadj (Laboratory L2MGC, University of Cergy Pontoise)
  • Received : 2017.12.31
  • Accepted : 2018.04.17
  • Published : 2018.06.25

Abstract

The objective of this study was to evaluate the influence of silica fume (SF) on the hydration heat and compressive strength of concrete. Portland cement with w/(c+sf) ratios varying between 0.25 to 0.45 was substituted by 10%, 20% and 30% of SF by mass. A superplasticizer was used to maintain a fluid consistency of the concrete. The heat of hydration was monitored continuously by a semi-adiabatic calorimetric method for 10 days at $20^{\circ}C$. Compressive strengths are tested for each mixture until age of 180 days. The results show that silica fume considerably influences the evolution and the ultimate values of the compressive strengths as well as the hydration heat especially for 10% rate. The w/b ratio has a considerable effect where its decrease modifies compressive strength and hydration heat more than silica fume. The correlation of the obtained results allows deducing of ultimate properties as well as the ages to reach half of their values. The correlation coefficients are close to unity and reflect the judicious choice of these relationships to be used to predict compressive strength and hydration heat.

Keywords

References

  1. Alshamsi, A.M. (1997), "Micro silica and ground granulated blast furnace slag effects on hydration temperature", Cement Concrete Res., 27(12), 1851-1859. https://doi.org/10.1016/S0008-8846(97)00195-6
  2. ASTM C1074-93 (1993), "Standard practice for estimating concrete strength by the maturity method", ASTM International, West Conshohocken, PA.
  3. Cheng-Yi, H. and Feldman, R.F. (1985), "Hydration reactions in Portland cement-silica fume blends", Cement Concrete Res., 15(4), 585-592. https://doi.org/10.1016/0008-8846(85)90056-0
  4. Douglas, E., Elola, A. and Malhotra, V.M. (1990), "Characterization of ground granulated blast furnace slags and fly ashes and their hydration in Portland blends", Cement Concrete Aggregate., 12(2), 38-46. https://doi.org/10.1520/CCA10387J
  5. Duval, R. and Kadri, E.H. (1998), "Influence of silica fume on the workability and compressive strength of high-performance concretes", Cement Concrete Res., 28(4), 533-547. https://doi.org/10.1016/S0008-8846(98)00010-6
  6. Eren, O. (2002), "Strength development of concrete with ordinary Portland cement, slag or fly ash and cured at different temperature", Mater. Struct., 35(9), 536-540. https://doi.org/10.1617/13873
  7. Ezziane, K., Kadri, E.H., Bougara, A. and Bennacer, R. (2010), "Analysis of mortar long-term strength with supplementary cementitious materials cured at different temperatures", ACI Mater. J., 107(4), 323-331.
  8. Godman, A. and Bentur, A. (1989), "Bond effects in high-strength silica fume concretes", ACI Mater. J., 86(5), 440-449.
  9. Kadri, E.H. and Duval, R. (2002), "Effect of ultrafines particles on heat of hydration of cement mortars", ACI Mater. J., 99(2), 138-142.
  10. Kadri, E.H., Aggoun, S., De Schutter, G. and Ezziane, K. (2010), "Combined effect of chemical nature and fineness of mineral powders on Portland cement hydration", Mater. Struct., 43(5), 665-673. https://doi.org/10.1617/s11527-009-9519-6
  11. Kadri, E.H., Kenai S., Ezziane K., Siddique, R. and De Schutter, G. (2011), "Influence of metakaolin and silica fume on the heat of hydration and compressive strength development of mortar", Appl. Clay Sci., 53(4), 704-708. https://doi.org/10.1016/j.clay.2011.06.008
  12. Langan, B.W., Weng, K. and Ward, M.A. (2002), "Effect of silica fume and fly ash on heat of hydration of Portland cement", Cement Concrete Res., 32(7), 1045-1051. https://doi.org/10.1016/S0008-8846(02)00742-1
  13. Ma, D.S., Martin, R. and Brown, P.W. (1994), "Calorimetric study of cement blends containing fly ash, silica fume and slag at elevated temperatures", Cement Concrete Aggregate., 16(2), 93-99.
  14. Malhotra, V.M. and Carette, G.G. (1983), "An efficient material: silica fume concrete, properties, applications, and limitations", Concrete Int., 5(5), 40-45.
  15. Mostafa, N.Y. and Brown, P.W. (2005), "Heat of hydration of high reactive pozzolans in blended cements: Isothermal conduction calorimetry", Thermochimica Acta, 435(2), 162-167. https://doi.org/10.1016/j.tca.2005.05.014
  16. Mukharjee, B.B. and Barai, S. (2015), "Characteristics of sustainable concrete incorporating recycled coarse aggregates and colloidal nano-silica", Adv. Concrete Constr., 3(3), 187-202. https://doi.org/10.12989/acc.2015.3.3.187
  17. Nocun-Wczelik, W. and Czapik, P. (2013), "Use of calorimetry and other methods in the studies of water reducers and set retarders interaction with hydrating cement paste", Constr. Build. Mater., 38(1), 980-986. https://doi.org/10.1016/j.conbuildmat.2012.09.048
  18. Pane, I. and Hansen, W. (2005), "Investigation of blended cement hydration by isothermal calorimetry and thermal analysis", Cement Concrete Res., 35(6), 1155-1164. https://doi.org/10.1016/j.cemconres.2004.10.027
  19. Persson, B. (1997), "Long term-effect of silica fume on the principal properties of low-temperature cured ceramics", Cement Concrete Res., 27(11), 1667-1680. https://doi.org/10.1016/S0008-8846(97)00147-6
  20. Popovics, S. (1987), "Attempts to improve the bond between cement paste and aggregate", Mater. Struct., 20(1), 32-38. https://doi.org/10.1007/BF02472724
  21. Sanches de Rojas, M.I. and Frias, M. (1995), "The influence of silica fume on the heat of hydration of Portland cement", Proceedings of the 5th CANMET/ACI International Conference on Fly Ash, Silica Fume Slag and Natural Pozzolans in Concrete, Milwaukee, Wisconsin, USA.
  22. Sanches de Rojas, M.I. and Frias, M. (1996), "The pozzolanic activity of different materials, its influence on the hydration heat in mortars", Cement Concrete Res., 26(2), 203-213. https://doi.org/10.1016/0008-8846(95)00200-6
  23. Sarkar, S.L. and Aitcin, P.C. (1987), "Dissolution rate of silica fume in very high strength concrete", Cement Concrete Res., 17(4), 591-601. https://doi.org/10.1016/0008-8846(87)90132-3
  24. Shaikh, F., Kerai, S. and Kerai, S. (2015), "Effect of micro-silica on mechanical and durability properties of high volume fly ash recycled aggregate concretes", Adv. Concrete Constr., 3(4), 317-331. https://doi.org/10.12989/acc.2015.3.4.317
  25. Shang, Y., Sun, W. and Liu, S. (2002), "Study on the hydration heat of binder paste in high performance concrete", Cement Concrete Res., 32(9), 1483-1488. https://doi.org/10.1016/S0008-8846(02)00810-4
  26. Sobolev, K. (2004), "The development of a new method for the proportioning of high-performance concrete mixtures", Cement Concrete Compos., 26(7), 901-907. https://doi.org/10.1016/j.cemconcomp.2003.09.002
  27. Toutanji, H., Delatte, N., Aggoun, S., Duval, R. and Dansona, A. (2004), "Effect of supplementary cementitious materials on the compressive strength and durability of short-term cured concrete", Cement Concrete Res., 34(2), 311-319. https://doi.org/10.1016/j.cemconres.2003.08.017
  28. Toutanji, H.A. and El-Korchi, T. (1995), "The Influence of silica fume on the compressive strength of cement paste and mortar", Cement Concrete Res., 25(7), 1591-1602. https://doi.org/10.1016/0008-8846(95)00152-3
  29. Xiaofeng, C., Shanglong, G., Darwin, D. and McCabe, S.L. (1992), "Role of silica fume in compressive strength of cement paste, mortar, and concrete", ACI Mater. J., 89(4), 375-387.
  30. Yogendran, V., Langan, B.W., Haque, M.N. and Ward, M.A. (1987), "Silica fume in high-strength concrete", ACI Mater. J., 84(2), 124-129.

Cited by

  1. Evaluation of mathematical models for prediction of slump, compressive strength and durability of concrete with limestone powder vol.10, pp.6, 2018, https://doi.org/10.12989/acc.2020.10.6.463