참고문헌
- Aas, G., Lacasse, S., Lunne, T. and Hoeg, K. (1986). "Use of in situ tests for foundation design on clay." Proceedings of In situ '86, Use of In Situ Tests in Geotechnical Engineering, ASCE GSP 6, Blacksburg, Virginia, pp. 1-30.
- Ajmera, B., Tiwari, B. and Shrestha, D. (2012). "Effect of mineral composition and shearing rates on the undrained shear strength of expansive clays." GeoCongress 2012, ASCE.
- Amar, S., Baguelin, F., Jezequel, J. F. and Le Mehaute, A. (1975). "In situ shear resistance of clays." Proc. ASCE Spec. Conf. In Situ Measurement of Soil Properties, Raleigh, Vol. 1, pp. 22-45.
- Baligh, M. M., Vivatrat, V. and Ladd, C. C. (1980). "Cone penetration in soil profiling." Journal of the Geotechnical Engineering Division, Vol. 106, No. 4, pp. 447-461.
- Bolton, M. D., Gui, M. W., Garnier, J., Corte, J. F., Bagge, G., Laue, J. and Renzi, R. (1999). "Centrifuge cone penetration tests in sand." Geotechnique, Vol. 49, No. 4, pp. 543-552. https://doi.org/10.1680/geot.1999.49.4.543
- Chung, S. F., Randolph, M. and Schneider, J. (2006). "Effect of penetration rate on penetrometer resistance in clay." Journal of Geotechnical and Geoenvironmetal Engineering, ASCE, Vol. 132, No. 9, pp. 1188-1196. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:9(1188)
- de Lima, D. C. and Tumay, M. T. (1991). "Scale effects in cone penetration tests." Geotechnical Engineering Congress, ASCE, GSP2 (7) Boulder, CO, pp. 38-51.
- DeJong, J., Yafrate, N. and DeGroot, D. (2011). "Evaluation of undrained shear strength using full-flow penetrometers." Journal of Geotechnical and Geoenvironmetal Engineering, ASCE, Vol. 137, No. 1, pp. 14-26. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000393
- Gui, M. W. (1998). "Guidelines for cone penetration tests in sand." Proc. Int. Conf. on Centrifuge Modelling (Centrifuge '98), A.A. Balkema, Rotterdam, Netherlands, Vol. 1, pp. 155-160.
- Jamiolkowski, M., Lancellotta, R., Tordella, L. and Battaglio, M. (1982). "Undrained Strength from CPT." Proc. of 2nd European Symposium on Penetration Testing, Amsterdam, pp. 599-606.
- Kim, J. H., Choo, Y. W., Kim, D. J. and Kim, D. S. (2015). "Miniature cone tip resistance on sand in a centrifuge." Journal of Geotechnical and Geoenvironmental Engineering, Vol. 142, No. 3, pp. 1-14.
- Kim, K. K., Prezzi, M., Salgado, R. and Lee, W. J. (2008). "Effect of penetration rate on cone penetration resistance in saturated clayey soils." Journal of Geotechnical and Geoenvironmetal Engineering, ASCE, Vol. 134, No. 8, pp. 1142-1153. https://doi.org/10.1061/(ASCE)1090-0241(2008)134:8(1142)
- Kjekstad, O., Lunne, T. and Clausen, C. J. F. (1978). "Comparison between insitu cone resistance and laboratory strength for overconsolidated north sea clays." Marine Geotechnology, Vol. 3, No. 1, pp. 23-36. https://doi.org/10.1080/10641197809379792
- Lunne, T. and Kleven, A. (1981). "Role of CPT in north sea foundation engineering." Symposium on Cone Penetration Testing and Experience, Geotechnical Division, ASCE, October, pp. 49-75.
- Lunne, T., Andersen, K. H., Low, H. E., Randolph, M. F. and Sjursen, M. (2011). "Guidelines for offshore in situ testing and interpretation in deepwater soft clays." Canadian Geotechnical Journal, Vol. 48, No. 4, pp. 543-556. https://doi.org/10.1139/t10-088
- Lunne, T., Eidsmoen, T., Gillespie, D. and Howland, J. D. (1986). "Laboratory and field evaluation of cone penetrometer." Proceedings of In situ '86, Use of In Situ Tests in Geotechnical Engineering, ASCE GSP 6, Blacksburg, Virginia, pp. 714-729.
- Lunne, T., Randolph, M. F., Chung, S. F., Andersen, K. H. and Sjursen, M. (2005). "Comparison of cone and T-bar factors in two onshore and one offshore clay sediments." Proc., Int. Symp. on Frontiers in Offshore Geotechnics (ISFOG), Perth, Australia, in press.
- Nanda, S., Sivakumar, V., Hoyer, P., Bradshaw, A., Gavin, K. G., Gerkus, H., Jalivand, S., Gilbert, R. B., Doherty, P. and Fanning, J. (2017). "Effects of strain rates on the undrained shear strength of kaolin." Geotechnical Testing Journal, Vol. 40, No. 6, pp. 951-962.
- Randolph, M. F. and Andersen, K. H. (2006). "Numerical analysis of T-bar penetration in soft clay." International Journal of Geomechanics, Vol. 6, No. 6, pp. 411-420. https://doi.org/10.1061/(ASCE)1532-3641(2006)6:6(411)
- Remai, Z. (2013). "Correlation of undrained shear strength and CPT resistance." Periodica Polytechnica, Civil Engineering, Vol. 57, No. 1, pp. 39-44. https://doi.org/10.3311/PPci.2140
- Robertson, P. K. (1989). "Soil classification using the cone penetration test" Canadian Geotechnical Journal, Vol. 27, pp. 151-158.
- Sheng, D., Cui, L. and Ansari, Y. (2012). "Interpretation of cone factor in undrained soils via full-penetration finite-element analysis." International Journal of Geomechanics, Vol. 13, No. 6, pp. 745-753.
- Stark, T. D. and Juhrend, J. E. (1989). "Undrained shear strength from cone penetration tests." Proceedings of the 12th International Conference on Soil Mechanics and Foundation Engineering, Rio de Janeiro, Vol. 1, pp. 327-330.
- Stewart, D. A. and Randolph, M. F. (1994). "T-bar penetration testing in soft clay." Journal of Geotechnical Engineering, Vol. 120, No. 12, pp. 2230-2235. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:12(2230)
- Sweeney, B. (1987). Liquefaction evaluation using a miniature cone penetrometer and a large-scale calibration chamber, Ph.D. dissertation, Stanford University, CA.
- Titi, H., Mohammad, L. and Tumay, M. (2000). "Miniature cone penetration tests in soft and stiff clays." Geotechnical Testing Journal, Vol. 23, No. 4, pp. 432-334. https://doi.org/10.1520/GTJ11064J
- Tumay, M. T., Kurup, P. U. and Boggess, R. L. (1998). "A continuous intrusion electronic miniature cone penetration test system for site characterization." Proceedings of the First International Conference on Site Characterization-ISC'98, Atlanta, Robertson & Mayne, Eds., Balkema, No. 2, pp. 1183-1188.
- Wei, L., Pant, R. and Tumay, M. (2010). "A case study of undrained shear strength evaluation from in-situ tests in soft Louisiana soils." GeoShanghai International Conference, Geotechnical Special Publication, 200, Soil Behavior and Geo-Micromechanics.