한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제17권3호
  • /
  • Pages.1-6
  • /
  • 2018
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

마이크로 프리즘 패턴의 엔드밀링에서 공구 마모와 정밀도

Tool Wear Rate and Accuracy of Patterns in Micro Prismatic End-milling

  • 안주은 (부경대학교 기계공학과) ;
  • 이정희 (부경대학교 기계공학과) ;
  • 곽재섭 (부경대학교 기계공학과)
  • An, Ju-Eun (Department of Mechanical Engineering, Pukyong National University) ;
  • Lee, Jung-Hee (Department of Mechanical Engineering, Pukyong National University) ;
  • Kwak, Jae-Seob (Department of Mechanical Engineering, Pukyong National University)
  • 투고 : 2018.02.09
  • 심사 : 2018.12.11
  • 발행 : 2018.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Micro prism pattern is applying in order to get increase of luminance, control the light, and so forth especially in optics and display industry. Most patterns are fabricated by lithography, planning, and EDM, but they have limitations on the productivity or the unit cost of produce. However, ultra precision mold is one of the processes able to replace it, and assure high productivity required by industries. In this investigation, micro prismatic end-milling is suggested in order to fabricate the pattern effectively. Micro prism pattern having $100{\mu}m$ of pitch and height was machined on STD-11. After machining, the flank and boundary wear on micro end mill were measured and analyzed, as well as burr formation and dimensional accuracy of fabricated pattern were evaluated. Thus the optimal cutting conditions were derived.

키워드

참고문헌

  1. Ebert, D., and Bhushan, B., "Durable Lotus-Effect Surfaces with Hierarchical Structure Using Micro- and Nanosized Hydrophobic Silica Particles," Journal of Colloid and Interface Science, Vol. 368, No. 1, pp. 584-591, 2012. https://doi.org/10.1016/j.jcis.2011.09.049
  2. Guo, P., Lu, Y., Pei, P., and Ehmann, K. F. "Fast Generation of Micro-channels on Cylindrical Surfaces by Elliptical Vibration Texturing," Journal of Manufacturing Science & Engineering, Vol. 136, No. 4, pp. 1-10, 2014.
  3. Deng, Y., Yi, P., Peng, L., Lai, X., and Lin, Z., "Experimental Investigation on the Large-Area Fabrication of Micro-Pyramid Arrays by Roll-to-Roll Hot Embossing on PVC film," Journal of Micromechanics & Microengineering, Vol. 24, No. 4, pp. 045023-045034, 2014. https://doi.org/10.1088/0960-1317/24/4/045023
  4. Shin, B. C., Ha, S. J., Kang, M. H., Heo, Y. M., Yoon, G. S., and Cho, M. W., "The cutting Process Monitoring of Micro Machine Using Multi Sensor," Transactions of Materials Processing, Vol. 18, No. 2, pp. 144-149, 2006. https://doi.org/10.5228/KSPP.2009.18.2.144
  5. Park, E. S., Je, T. J., Choi, H. J., Jeon, E. C., and Kang, M. C., "Wear Characteristics of V shape Diamond Tool for Micro Prism Pattern with Al Alloys," Transactions of Nonferrous Metals Society of China, Vol. 22, No. 3, pp. s769-s774, 2012. https://doi.org/10.1016/S1003-6326(12)61802-0
  6. Shin, B, S., Kim, S. U., Kim, J. K., and Lee, K. H., "Robust Design of an Automobile Ball Joint Considering the Worst-Case Analysis," Journal of the Korean Society of Manufacturing Process Engineering, Vol. 16, No. 1, pp.102-111, 2017.
  7. Jang, S. M., and Kang, S. G., "A Study on the Quantitative Analysis of CUtting Parameters and Prediction Model for Surface Roughness in Milling," Journal of the Korean Society of Manufacturing Process Engineering, Vol. 16, No. 3, pp.125-130, 2017.

피인용 문헌

  1. 마이크로 기둥 구조의 크기가 소유성 특성 발현에 미치는 영향 vol.17, pp.5, 2018, https://doi.org/10.14775/ksmpe.2018.17.5.091