DOI QR코드

DOI QR Code

Sparsity-constrained Extended Kalman Filter concept for damage localization and identification in mechanical structures

  • Ginsberg, Daniel (Department of Mechanical Engineering, University of Siegen) ;
  • Fritzen, Claus-Peter (Department of Mechanical Engineering and Center of Sensor Systems (ZESS), University of Siegen) ;
  • Loffeld, Otmar (Center of Sensor Systems (ZESS), University of Siegen)
  • 투고 : 2017.11.30
  • 심사 : 2018.04.30
  • 발행 : 2018.06.25

초록

Structural health monitoring (SHM) systems are necessary to achieve smart predictive maintenance and repair planning as well as they lead to a safe operation of mechanical structures. In the context of vibration-based SHM the measured structural responses are employed to draw conclusions about the structural integrity. This usually leads to a mathematically illposed inverse problem which needs regularization. The restriction of the solution set of this inverse problem by using prior information about the damage properties is advisable to obtain meaningful solutions. Compared to the undamaged state typically only a few local stiffness changes occur while the other areas remain unchanged. This change can be described by a sparse damage parameter vector. Such a sparse vector can be identified by employing $L_1$-regularization techniques. This paper presents a novel framework for damage parameter identification by combining sparse solution techniques with an Extended Kalman Filter. In order to ensure sparsity of the damage parameter vector the measurement equation is expanded by an additional nonlinear $L_1$-minimizing observation. This fictive measurement equation accomplishes stability of the Extended Kalman Filter and leads to a sparse estimation. For verification, a proof-of-concept example on a quadratic aluminum plate is presented.

키워드

참고문헌

  1. Balageas, D., Fritzen, C.P. and Guemes, A. (2006), Structural Health Monitoring, Hermes Science Publishing
  2. Candes, E.J. and Wakin, E.J. (2008), "An introduction to compressive sampling", IEEE Signal Proc. Mag., 25(2), 21-30. https://doi.org/10.1109/MSP.2007.914731
  3. Ching, J., Beck, J.L. and Porter, K.A. (2006), "Bayesian state and parameter estimation of uncertain dynamical systems", Probab. Eng. Mech., 21(1), 81-96. https://doi.org/10.1016/j.probengmech.2005.08.003
  4. Corigliano, A. and Mariani, S. (2004), "Parameter identification in explicit structural dynamics: performance of the extended Kalman filter", Comput. Method. Appl. M., 193(36-38), 3807-3835. https://doi.org/10.1016/j.cma.2004.02.003
  5. Ding, Y. and Gua, L. (2016), "Structural identification based on incomplete measurements with iterative Kalman filter", Struct. Eng. Mech., 59(6), 1037-1054. https://doi.org/10.12989/sem.2016.59.6.1037
  6. Donoho, D.L. and Huo, X. (2006), "Uncertainty principles and ideal atomic decomposition", IEEE T. Inform. Theory, 47(7), 2845-2862.
  7. Ebrahimian, H., Astroza, R. and Conte, J.P. (2015), "Extended Kalman filter for material parameter estimation in nonlinear structural finite element models using direct differentiation method", Earthq. Eng. Struct. D., 44(10), 1495-1522. https://doi.org/10.1002/eqe.2532
  8. Fritzen, C.P. and Ginsberg, D. (2017), "Sparse solution techniques in load and damage monitoring systems", Advances in Science and Technology, 7th Forum on New Materials - Part E., 101, 35-44.
  9. Fritzen, C.P., Jennewein, D. and Buchen, D. (1996), "Model Based Damage Detection From Vibration Data", Proc. ISMA21: Noise and Vibration Engineering, 1017-1032.
  10. Lei, Y., Liu, C., Jiang Y.Q. and Mao, Y.K. (2013), "A two-stage and two-step algorithm for the identification of structural damage and unknown excitations: numerical and experimental studies", Smart Struct. Syst., 15(1), 57-80. https://doi.org/10.12989/sss.2015.15.1.057
  11. Lei, Y., Chen, F. and Zhou, H. (2015), "Substructure based structural damage detection with limited input and output measurements", Smart Struct. Syst., 12(6), 619-640. https://doi.org/10.12989/SSS.2013.12.6.619
  12. Liu, X., Escamilla-Ambrosio, P.J. and Lieven, N.A.J (2009), "Extended Kalman filtering for the detection of damage in linear mechanical structures", J. Sound Vib., 325(4-5), 1023-1046. https://doi.org/10.1016/j.jsv.2009.04.005
  13. Loffeld, O., Seel, A., Conde, M.H. and Wang, L.A. (2016), "Nullspace based L1 minimizing Kalman Filter approach to sparse CS Reconstruction", Advances in Sience and Technology, 11th European Conference on Synthetic Aperture Radar (EUSAR 2016)
  14. Sato, T. and Qi, K. (1998), "Adaptive $H{\infty}$ filter: its application to structural identification", J. Eng. Mech. - ASCE, 141(11), 1233-1240.
  15. Smyth, A.W., Masri, S.F., Chassiakos A.G. and Caughey, T.K. (1999), "On-line parametric identification of MDOF nonlinear hysteretic systems", J. Eng. Mech. - ASCE, 125(2), 133-142. https://doi.org/10.1061/(ASCE)0733-9399(1999)125:2(133)
  16. Sohn, H., Farrar, C.R., Hemez, F.M., Shunk, D.D., Stinemates, D.W., Nadler, B.R. and Czarnecki, J.J. (2003), A Review Of Structural Health Monitoring Literature: 1996-2001, Los Alamos National Laboratory
  17. Tikhonov, A.N. and Arsenin, V.I.A. (1977), "Solutions of ill-posed problems", Scripta series in mathematics.
  18. Wan, C., Sato, T., Wu, Z. and Zhang, J. (2013), "Damage identification using chaotic excitation", Smart Struct. Syst., 11(1), 87-102. https://doi.org/10.12989/sss.2013.11.1.087
  19. Wu, B. and Wang, T. (2014), "Model updating with constrained unscented Kalman filter for hybrid testing", Smart Struct. Syst., 14(6), 1105-1129. https://doi.org/10.12989/sss.2014.14.6.1105
  20. Yang, J.N. and Lin, S. (2005), "Identification of parametric variations of structures based on least squares estimation and adaptive tracking technique", J. Eng. Mech. - ASCE, 131(3), 290-298. https://doi.org/10.1061/(ASCE)0733-9399(2005)131:3(290)
  21. Zhang, C., Huang, J.Z., Song, G.Q., Dai, L. and Li, H.K. (2016), "Detection of structural damage via free vibration responses by extended Kalman filter with Tikhonov regularization scheme", Struct. Monit. Maint., 3(2), 115-127. https://doi.org/10.12989/SMM.2016.3.2.115

피인용 문헌

  1. Optimal Placement of Virtual Masses for Structural Damage Identification vol.19, pp.2, 2019, https://doi.org/10.3390/s19020340