DOI QR코드

DOI QR Code

Evaluation of Seismic performance of RC setback frames

  • Habibi, Alireza (Department of Civil Engineering, Shahed University) ;
  • Vahed, Meisam (Department of Civil Engineering, University of Kurdistan, Kurdistan Province) ;
  • Asadi, Keyvan (Department of Civil Engineering, University of Kurdistan, Kurdistan Province)
  • 투고 : 2017.04.24
  • 심사 : 2018.03.21
  • 발행 : 2018.06.10

초록

When the irregularities occurred in buildings, affect their seismic performance. This paper has focused on one of the types of irregularities at the height that named setback in elevation. For this purpose, several multistorey Reinforced Concrete Moment Resisting Frames (RCMRFs) with different types of setbacks were designed according to new edition of Iranian seismic code. The nonlinear time history analysis was performed to predict the seismic performance of frames subjected to seven input ground motions. The assessment of the seismic performance was done considering both global and local criteria. Results showed that the current edition of Iranian seismic code needs to be modified in order to improve the seismic behaviour of reinforced concrete moment resisting setback buildings. It was also shown that the maximum damages happen at the elements located in the vicinity of the setbacks. Therefore, it is necessary to strengthen these elements by appropriate modification of Iranian seismic code.

키워드

참고문헌

  1. Aranda, G.R. (1984), "Ductility demands for R/C frames irregular in elevation", Proceedings of the 8th World Conference on Earthquake Eng., San Francisco, U.S.A., July.
  2. Asteris, P.G., Repapis, C.C., Foskolos, F., Fotos, A. and Tsaris, A.K. (2017), "Fundamental period of infilled RC frame structures with vertical irregularity", Struct. Eng. Mech., 61(5), 663-674. https://doi.org/10.12989/sem.2017.61.5.663
  3. Athanassiadou, C.J. (2008), "Seismic performance of R/C plane frames irregular in elevation", Eng. Struct., 30(5), 1250-1261. https://doi.org/10.1016/j.engstruct.2007.07.015
  4. Bigdeli, Y., Kim, D. and Chang, S. (2014), "Vibration control of 3D irregular buildings by using developed neuro-controller strategy", Struct. Eng. Mech., 49(6), 687-703. https://doi.org/10.12989/sem.2014.49.6.687
  5. Chen, C., Lam, N.T.K. and Mendis, P. (2000), "The bifurcation behavior of vertically irregular buildings in low seismicity regions", Proceedings of the 12th World Conference on Earthquake Engineering, New Zealand, January.
  6. Design and Implementation of Concrete Buildings (2012), Topic Ninth National Building Regulations, Office of National Building Regulations, Tehran, Iran.
  7. Destefano, M., Marino, E.M. and Viti, S. (2005), "Evaluation of second order effects on the seismic response of vertically irregular RC framed structures", Proceedings of the 4th European Workshop on the Seismic Behavior of Irregular and Complex Structures, Thessaloniki, Greece, August.
  8. Duan, X.N. and Chandler, A.M. (1995), "Seismic torsional response and design procedures for a class of setback frame buildings", Earthq. Eng. Struct. Dyn., 24(5), 761-777. https://doi.org/10.1002/eqe.4290240511
  9. Eurocode8 (2004), Design of Structures for Earthquake Resistance. Part1: General Rules, Seismic Actions and Rules for Buildings, European Committee for Standardization, Brussels, Belgium.
  10. FEMA 356 (2000), Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agency, Washington, U.S.A.
  11. Georgoussis, G.K. (2011), "Simplified dynamic analysis of eccentric buildings with a setback. 1: The effect of mass irregularity", Struct. Des. Tall Spec. Build., 20(8), 911-927. https://doi.org/10.1002/tal.567
  12. Gursoy, S., Oz, R. and Bas, S. (2015), "Investigation of the effect of weak-story on earthquake behavior and rough construction costs of RC buildings", Comput. Concrete, 16(1), 141-161. https://doi.org/10.12989/cac.2015.16.1.141
  13. Habibi, A.R. and Asadi, K. (2014), "Seismic performance of reinforced concrete moment resisting frames with setback based on Iranian seismic code", Int. J. Civil Eng., 12(1), 41-54.
  14. Habibi, A.R. and Asadi, K. (2016), "Development of drift-based damage index for reinforced concrete moment resisting frames with setback", Int. J. Civil Eng.
  15. Humar, J.L. and Wright, W. (1977), "Earthquake response of steelframed multistory buildings with setbacks", Earthq. Eng. Struct. Dyn., 5(1), 15-39. https://doi.org/10.1002/eqe.4290050103
  16. Kappos, A.J. and Stefanidou, S. (2010), "A deformation-based seismic design method for 3D R/C irregular buildings using inelastic dynamic analysis", Bullet. Earthq. Eng., 8(4), 875-895. https://doi.org/10.1007/s10518-009-9170-1
  17. Karavasilis, T.L., Bazeos, N. and Beskos, D.E. (2008), "Seismic response of plane steel MRF with setbacks: Estimation of inelastic deformation demands", J. Constr. Steel Res., 64(6), 644-654. https://doi.org/10.1016/j.jcsr.2007.12.002
  18. Khoury, W., Rutenberg, A. and Levy, R. (2005), "On the seismic response of a symmetric setback perimeter-frame structures", Proceedings of the 4th European Workshop on the Seismic Behavior of Irregular and Complex Structures, Thessaloniki, Greece, August.
  19. Landi, L., Pollio, B. and Diotallevi, P.P. (2014), "Effectiveness of different standard and advanced pushover procedures for regular and irregular RC frames", Struct. Eng. Mech., 51(3), 433-446. https://doi.org/10.12989/sem.2014.51.3.433
  20. Lignos, D.G. and Gantes, C.J. (2005), "Seismic demands for steel braced frames with stiffness irregularities based on modal pushover analysis", Proceedings of the 4th European Workshop on the Seismic Behavior of Irregular and Complex Structures, Thessaloniki, Greece, August.
  21. Mazza, F., Mazza, M. and Vulcano, A. (2015), "Displacementbased seismic design of hysteretic damped braces for retrofitting in-elevation irregular RC framed structures", Soil Dyn. Earthq. Eng., 69, 115-124. https://doi.org/10.1016/j.soildyn.2014.10.029
  22. Mazzolani, F.M. and Piluso, V. (1996), Theory and Design of Seismic Resistant Steel Frames, E. & F.N. SPON, London, U.K.
  23. Pacific Earthquake Engineering Research Centre (PEER), Strong Ground Motion Database, .
  24. Park, Y.J., Reinhorn, A.M. and Kunnath, S.K. (1987), IDARC: Inelastic Damage Analysis of Reinforced Concrete Frame-Shear-Wall Structures, Technical Report NCEER-87-0008, State University of New York at Buffalo, U.S.A.
  25. Pekau, O.A. and Green, R. (1974), "Inelastic structures with setbacks", Proceedings of the 5th World Conference on Earthquake Engineering, Rome, June.
  26. Penzien, J. (1969), "Earthquake response of irregularly shaped buildings", Proceedings of the 4th World Conference on Earthquake Engineering, Santiago, Chile, January.
  27. Penzien, J. and Chopra, A.K. (1965), "Earthquake response of appendage on a multi-story building", Proceedings of the 3rd World Conference on Earthquake Engineering, New Zealand, January.
  28. Rahami, H., Kaveh, A., Ardalan Asl, M. and Mirghaderi, S. (2013), "Analysis of near-regular structures with node irregularity using SVD of equilibrium matrix", Int. J. Civil Eng., 11(4), 226-241.
  29. Romao, X., Costa, A. and Delgado, R. (2004), "Seismic behavior of reinforced concrete frames with setbacks", Proceedings of 13th World Conference on Earthquake Engineering, Vancouver, Canada, August.
  30. Sarkar, P., Prasadb, A.M. and Menonb, D. (2010), "Vertical geometric irregularity in stepped building frames", Eng. Struct., 32(10), 2175-2182. https://doi.org/10.1016/j.engstruct.2010.03.020
  31. Shahrooz, B.M. and Moehle, J.P. (1990), "Seismic response and design of setback buildings", J. Struct. Eng., 116(5), 1423-1439. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:5(1423)
  32. Shakib, H. and Pirizadeh, M. (2014), "Probabilistic seismic performance assessment of setback buildings under bidirectional excitation", J. Struct. Eng., 140(2), 140-145.
  33. Standard No. 2800 (2005), Iranian Code of Practice for Seismic Resistance Design of Buildings, 3rd Edition, BHRC, Permanent Committee for Revising the Iranian Code of Practice for Seismic Resistant Design of Buildings, Tehran, Iran.
  34. Standard No. 2800 (2013), Iranian Code of Practice for Seismic Resistance Design of Buildings, 4rd Edition, BHRC, Permanent Committee for Revising the Iranian Code of Practice for Seismic Resistant Design of Buildings, Tehran, Iran
  35. Tena-Colunga, A. (2004), "Evaluation of the seismic response of slender, setback RC moment-resisting frame buildings designed according to the seismic guidelines of a modern building code", Proceedings of the 13th World conference on earthquake engineering, Vancouver, Canada, August.
  36. Varadharajan, S., Sehgal, V.K. and Saini, B. (2012), "Review of different structural irregularities in buildings", J. Struct. Eng., 39(5), 393-418.
  37. Varadharajan, S., Sehgal, V.K. and Saini, B. (2013), "Determination of inelastic seismic demands of RC moment resisting setback frames", Arch. Civil Mech. Eng., 13(3), 370-393. https://doi.org/10.1016/j.acme.2013.02.006
  38. Varadharajan, S., Sehgal, V.K. and Saini, B. (2014), "Fundamental time period of RC setback buildings", Concrete Res. Lett., 5(4), 901-935.
  39. Varadharajan, S., Sehgal, V.K. and Saini, B. (2015), "Seismic behavior of multistorey RC frames with vertical mass irregularities", Concrete Res. Lett., 6(1), 21-39.
  40. Wong, C.M. and Tso, W.K. (1994), "Seismic loading for buildings with setbacks", Can. J. Civil Eng., 21(5), 863-871. https://doi.org/10.1139/l94-092
  41. Wood, S.L. (1992), "Seismic response of R/C frames with irregular profiles", J. Struct. Eng., 118(2), 545-566. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:2(545)
  42. Wu, X., Sun, Y., Rui, M., Yan, M., Li, L. and Liu, D. (2013), "Elasto-plastic time history analysis of an asymmetrical twintower rigid-connected structure", Comput. Concrete, 12(2), 211-228. https://doi.org/10.12989/cac.2013.12.2.211
  43. Zahid, M.Z.A.M., Robert, D. and Shahrin, F. (2013), "An evaluation of over strength factor of seismic designed low rise RC buildings", Proc. Eng., 53, 48-51. https://doi.org/10.1016/j.proeng.2013.02.008
  44. Zhou, J., Zhao, W. and Mao, W. (2015), "Least favorable probability of failure for 5-and 10-story RC frame structures with vertical irregularities", J. Earthq. Eng., 19(7), 1158-1180. https://doi.org/10.1080/13632469.2015.1025315