Abstract
The material normally used in hot dip galvanizing facilities is SM45C (carbon steel for mechanical structure, KS standard), mainly because of its price. During this process, the oxidation of the plating facility occurs due to the heat of the Zn fumes coming from the molten zinc. Since the cycle time of the current facilities is 6 months, much time and money are wasted. In this study, the corrosive properties of various materials (Inconel625, STS304, SM45C) were investigated by oxidation in a high temperature and Zn fumes environment. The possibility of applying the hot-dip galvanizing equipment was investigated for each material. The Zn fumes were generated by directly bubbling Ar gas into Zn molten metal in a 650 degree furnace. High-temperature, Zn fumes corrosion was conducted for 30 days. The sample was removed after 30 days and the oxidation of the surface was confirmed with EDS and SEM, and the corrosion properties were examined using potentiodynamic polarization tests.
대부분의 용융 아연 도금 설비에 사용되고 있는 소재는 SM45C(기계구조용 탄소강, KS규격)으로, 주로 저렴한 가격적인 측면에 의해 사용되고 있다. 용융 아연 도금의 특성상 해당 용탕에서 발생되어 올라오는 Zn Fume과 고온의 열에 의한 도금 설비의 산화가 발생되고 있으며 현재 용융 아연 도금 설비의 교체 주기의 시기는 6개월으로 많은 시간과 설비 비용이 낭비 되어오고 있다. 이에 본 연구에서는 다양한 소재들(Inconel625, STS304, SM45C)을 이용하여 고온과 Zn Fume 환경에서 강제로 산화 시켜 각각의 부식성을 확인하고 비교 분석하였으며, 각 소재들의 용융 아연 도금 현장 설비에 적용 가능성을 파악하고자 진행하였다. 강제 산화 실험은 650도의 대기로 내에 Zn 용탕을 두고, Ar 가스를 용탕 내에서 직접 버블링하여 Zn fume를 발생시켜 고온, Zn fume에 의한 부식을 행하는 실험을 하였다. 30일 후 Sample들을 꺼내어 표면의 산화층을 EDS, SEM으로 확인하고, 동전위분극 시험을 이용하여 부식성을 비교 분석하였다.