References
- L. G. Austin, R. R. Klimpel, and P. T. Luckie, Process Engineering of Size Reduction: Ball Milling; pp. 12-14, 81-93, 240-41, Society of Mining Engineers of the AIME, New York, 1984.
- S. K. Sung, "The Theory of Comminution and the Actual Operation (in Korean)," Cement, 28 58-67 (1969).
- C.-H. Sim, "The Effect of the Operating Variables on the Batch Ball Milling," Prospect. Ind. Chem., 3 [1] 46-57 (2000).
- H. Shin, S. Lee, H. S. Jung, and J.-B. Kim, "Effect of Ball Size and Powder Loading on the Milling Efficiency of a Laboratory-Scale Wet Ball Mill," Ceram. Int., 39 [8] 8963-68 (2013). https://doi.org/10.1016/j.ceramint.2013.04.093
- H. Watanabe, "Critical Rotation Speed for Ball-Milling," Powder Technol., 104 [1] 95-9 (1999). https://doi.org/10.1016/S0032-5910(99)00031-5
- H. Mori, H. Mio, J. Kano, and F. Saito, "Ball Mill Simulation in Wet Grinding Using a Tumbling Mill and Its Cor relation to Grinding Rate," Powder Technol., 143-144 230-39 (2004). https://doi.org/10.1016/j.powtec.2004.04.029
- S.-H. Hong and B.-K. Kim, "Effects of Lifter Bars on the Ball Motion and Aluminum Foil Milling in Tumbler Ball Mill," Mater. Lett., 57 [2] 275-79 (2002). https://doi.org/10.1016/S0167-577X(02)00778-4
- N. N. S. Lameck, Effects of Grinding Media Shapes on Ball Mill Performance, pp. 8-39, in M. S. Thesis, University of the Witwatersrand, Johannesburg, 2005.
- V. Monov, B. Sokolov, and S. Stoenchev, "Grinding in Ball Mills: Modeling and Process Control," Cybern. Inf. Technol., 12 [2] 51-68 (2012).
- A. S. Kurlov and A. I. Gusev, "Effect of Ball Milling Parameters on the Particle Size in Nanocrystalline Powders," Tech. Phys. Lett., 33 [10] 828-32 (2007). https://doi.org/10.1134/S1063785007100070
- P. W. Cleary, "Predicting Charge Motion, Powder Draw, Segregation and Wear in Ball Mills Using Discrete Element Methods," Miner. Eng., 11 [11] 1061-80 (1998). https://doi.org/10.1016/S0892-6875(98)00093-4
- Hosseini, "Acoustic Emissions Simulation of Tumbling Mills using Charge Dynamics," Miner. Eng., 24 [13] 1440-47 (2011). https://doi.org/10.1016/j.mineng.2011.07.002
- J. Tang, L.-J. Zhao, J.-W. Zhou, H. Yue, and T.-Y. Chai, "Experimental Analysis of Wet Mill Load Based on Vibration Signals of Laboratory-Scale Ball Mill Shell," Miner. Eng., 23 [9] 720-30 (2010). https://doi.org/10.1016/j.mineng.2010.05.001
- S. P. Das, D. P. Das, S. K. Behera, and B. K. Mishra, "Interpretation of Mill Vibration Signal via Wireless Sensing," Miner. Eng., 24 [3-4] 245-51 (2011). https://doi.org/10.1016/j.mineng.2010.08.014
- B. Behera, B. K. Mishra, and C. V. R. Murty, "Experimental Analysis of Charge Dynamics in Tumbling Mills by Vibration Signature Technique," Miner. Eng., 20 [1] 84-91 (2007). https://doi.org/10.1016/j.mineng.2006.05.007
- F. M. Katubilwa and M. H. Moys, "Effects of Filling Degree and Viscosity of Slurry on Mill Load Orientation," Miner. Eng., 24 [13] 1502-12 (2011). https://doi.org/10.1016/j.mineng.2011.08.004
- H.-K. Lee, K.-S. Cho, M.-H. Jang, C.-W. Jang, S.-M. Kim, and M.-Y. Kim, "Characteristics of Large Green and Sintered Alumina Ceramics by Filter Pressing," J. Korean Ceram. Soc., 46 [3] 306-12 (2009). https://doi.org/10.4191/KCERS.2009.46.3.306
- K.-S. Cho, J. Kim, S. Y. Lee, J. P. Oh, and S. I. Park, "Shape Forming of Alumina by Step Pressure-Vacuum Hybrid Slip Casting," Appl. Mech. Mater., 217-219 1899-902 (2012). https://doi.org/10.4028/www.scientific.net/AMM.217-219.1899
- K.-S. Cho, I.-B. Song, and J. Kim, "Homogeneous Shape Forming of Alumina by Pressure-Vacuum Hybrid Slip Casting," J. Korean Ceram. Soc., 49 [6] 592-600 (2012). https://doi.org/10.4191/kcers.2012.49.6.592
- K.-S. Cho, H.-K. Lee, and B.-J. Woo, "Effect of Step Pressure on Shape Forming of Alumina by Pressure-Vacuum Hybrid Slip Casting," J. Korean Ceram. Soc., 50 [2] 142-48 (2013). https://doi.org/10.4191/kcers.2013.50.2.142
Cited by
- Increasing Energy Efficiency and Productivity of the Comminution Process in Tumbling Mills by Indirect Measurements of Internal Dynamics-An Overview vol.13, pp.24, 2018, https://doi.org/10.3390/en13246735