DOI QR코드

DOI QR Code

Seismic performance of retrofitted URM walls with diagonal and vertical steel strips

  • Darbhanzi, Abbas (College of Engineering, Vali-e-Asr University of Rafsanjan) ;
  • Marefat, Mohammad S. (School of Civil Engineering, College of Engineering, University of Tehran) ;
  • Khanmohammadi, Mohammad (School of Civil Engineering, College of Engineering, University of Tehran) ;
  • Moradimanesh, Amin (School of Civil Engineering, College of Engineering, University of Tehran) ;
  • Zare, Hamid (School of Civil Engineering, College of Engineering, University of Tehran)
  • 투고 : 2017.05.20
  • 심사 : 2018.03.19
  • 발행 : 2018.05.25

초록

Earthquakes have shown the vulnerability of unreinforced masonry (URM) structures. The aim of this research is to study a technique for in-plane seismic retrofitting of URM walls in which both diagonal and vertical steel strips are added to a single side of a URM wall. Specimens have been tested under quasi-static cyclic lateral load in combination with constant vertical load. The tests show that vertical and diagonal strips cause a significant increase in seismic capacity in terms of both strength (about 200%) and displacement at maximum (about 20%). Furthermore, this technique caused the failure modes of URM walls were influenced.

키워드

참고문헌

  1. Abdul Karim, A.R., M.Sa'don, N. and Ingham, J.M. (2016), "Structural dynamic response of an unreinforced masonry house using non-destructive forced vibration", J. Earthq. Eng., 20, 1-11. https://doi.org/10.1080/13632469.2015.1051247
  2. Ahmad, Z., Shahzada, K., Gencturk, B., Naeem Khan, A., Rehan, R., Fahad, M., Ashraf, M. and Ali, Z. (2015), "Seismic capacity assessment of unreinforced concrete block masonry buildings in Pakistan before and after retrofitting", J. Earthq. Eng., 19, 357-382. https://doi.org/10.1080/13632469.2014.963744
  3. ASTM C1314 (2002), Standard Test Method for Compressive Strength of Masonry Prisms, American Society for Testing of Materials (ASTM), USA.
  4. ASTM C1531 (2002), Standard Test Methods for in Situ Measurement of Masonry Mortar Joint Shear Strength index, American Society for Testing of Materials (ASTM), USA.
  5. ASTM C67 (2002), Standard Test Method for Sampling and Testing Brick and Structural Clay Tile, American Society for Testing of Materials (ASTM), USA.
  6. ASTM E8/E8M-09 (2009), Standard Test Methods for Tension Testing of Metallic Materials, American Society for Testing of Materials (ASTM), USA.
  7. Benedetti, A., Landi, L. and Merenda, D.G. (2014), "Displacement-based design of an energy dissipating system for seismic upgrading of existing masonry structures", J. Earthq. Eng., 18, 477-501. https://doi.org/10.1080/13632469.2014.897274
  8. Churilov, S. and Dumova-Jovanoska, E. (2013), "In-plane shear behaviour of unreinforced and jacketed brick masonry walls", Soil Dyn. Earthq. Eng., 50, 85-105. https://doi.org/10.1016/j.soildyn.2013.03.006
  9. Darbhanzi, A., Marefat, M.S. and Khanmohammadi, M. (2014), "Investigation of in-plane seismic retrofit of unreinforced masonry walls by means of vertical steel strips", Constr. Build. Mater., 52, 122-129. https://doi.org/10.1016/j.conbuildmat.2013.11.020
  10. ELGawady, M.A., Lestuzzi, P. and Badoux, M. (2006), "Shear strength of URM walls retrofitted using FRP", Eng. Struct., 28, 1658-1670. https://doi.org/10.1016/j.engstruct.2006.03.005
  11. Farooq, S.H., Ilyas, M. and Amir, S. (2012), "Response of masonry walls strengthened with CFRP and steel strips", Arab J. Sci. Eng., 37, 545-559. https://doi.org/10.1007/s13369-012-0190-9
  12. Lourenco, P.B., Vasconcelos, G., Medeiros, P. and Gouveia, J. (2010), "Vertically perforated clay brick masonry for loadbearing and non-loadbearing masonry walls", Constr. Build. Mater., 24, 2317-2330. https://doi.org/10.1016/j.conbuildmat.2010.04.010
  13. Magenes, G. and Calvi, GM. (1997), "In-plane seismic response of brick masonry walls", Earthq. Eng. Struct. Dyn., 26, 1091-1112. https://doi.org/10.1002/(SICI)1096-9845(199711)26:11<1091::AID-EQE693>3.0.CO;2-6
  14. Magenes, G., Morandi, P. and Penna A. (2008), "experimental inplane cyclic response of masonry walls with clay units'', Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China.
  15. Mahjoob Farshchi, D., Motavalli, M., Schumacher, A. and Marefat, M.S. (2009), "Numerical modeling of in-plane behaviour of URM walls and an investigation into the aspect ratio, vertical and horizontal post-tensioning and head joint as a parametric study", Arch. Civil Mech. Eng., 9(1), 5-27. https://doi.org/10.1016/S1644-9665(12)60037-5
  16. Mahmood, H. and Ingham, J.M. (2011), "Diagonal compression testing of FRP-retrofitted unreinforced clay brick masonry wallettes", J. Compos. Constr., ASCE, 15(5), 810-820. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000209
  17. Marcari, G., Manfredi, G., Prota, A. and Pecce, M. (2007), "Inplane shear performance of masonry panels strengthened with FRP'', Compos. Part B, 38, 887-901. https://doi.org/10.1016/j.compositesb.2006.11.004
  18. Medeiros, P., Vasconcelos, G., Lourenco, P.B. and Gouveia, J. (2013), "Numerical modelling of non-confined and confined masonry walls", Constr. Build. Mater., 41, 968-976. https://doi.org/10.1016/j.conbuildmat.2012.07.013
  19. Paulay, T. and Priestley, M.J.N. (1992), Seismic Design Of Reinforced Concrete And Masonry Buildings, Wiley-Interscience, New York.
  20. Popa, V., Pascu, R., Papurcu, A. and Albota, E. (2016), "Retrofitting of squat masonry walls by FRP grids bonded by cement-based mortar", Earthq. Struct., 10(1), 125-139. https://doi.org/10.12989/eas.2016.10.1.125
  21. Porter, M.L. (1987), "Sequential phased displacement (SPD) procedure for TCCMAR testing", Report of the Third Meeting of the US-Japan Joint Technical Committee on Masonry Research, Tomaru, Japan.
  22. Preciado, A., Ramirez-Gaytan, A., Salido-Ruiz, A.R., Caro-Becerra, L.J. and Lujan-Godinez, R. (2015), "Earthquake risk assessment methods of unreinforced masonry structures: Hazard and vulnerability", Earthq. Struct., 9(4), 719-733. https://doi.org/10.12989/eas.2015.9.4.719
  23. Remki, M., Kehila, F., Bechtoula, H. and Bourzam, A. (2016), "Seismic vulnerability assessment of composite reinforced concrete-masonry building", Earthq. Struct., 11(2), 371-386. https://doi.org/10.12989/eas.2016.11.2.371
  24. Sadek, H. and Lissel, S. (2013), "Seismic performance of masonry walls with GFRP and geogrid bed joint reinforcement", Constr. Build. Mater., 41, 977-989. https://doi.org/10.1016/j.conbuildmat.2012.07.005
  25. Taghdi, M., Bruneau, M. and Saatcioglu, M. (2000), "Seismic retrofitting of low-rise masonry and concrete walls using steel strips", J. Struct. Eng., ASCE, 126(9), 1017-1025. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:9(1017)
  26. Tena-Colunga, A., Juarez-Angeles, A., Victor, H. and Salinas-Vallejo, V.H. (2009), "Cyclic behavior of combined and confined masonry walls", Eng. Struct., 31, 240-259. https://doi.org/10.1016/j.engstruct.2008.08.015
  27. Tomazevic, M. (1996), "Recent advances in earthquake-resistant design of masonry buildings", Proceedings of the 11th World Conference on Earthquake Engineering, Acapulco, Paper No. 2012.
  28. Tomazevic, M., Bosiljkov, V. and Weiss, P. (2004) "Structural behavior factor for masonry structures", Proceedings of the 13th Conference on Earthquake Engineering, Vancouver, Canada.
  29. Vasconcelos, G. and Lourenco, P.B. (2005), "Evaluation of the inplane seismic performance of stone masonry walls", Proceedings of the 5th International Conference (AMCM 2005), Gliwice-Ustron, Poland.
  30. Wang, Q., Chai, Z. and Wang, L. (2014), "Seismic capacity of brick masonry walls externally bonded GFRP under in-plane loading", Struct. Eng. Mech., 51(3), 413-431. https://doi.org/10.12989/sem.2014.51.3.413
  31. Zuccarello, F.A., Milani, G., Olivito, R.S. and Tralli, A. (2009), "A numerical and experimental analysis of unbonded brickwork panels laterally loaded", Constr. Build. Mater., 23, 2093-2106. https://doi.org/10.1016/j.conbuildmat.2008.08.031

피인용 문헌

  1. Improving in-plane seismic response of unreinforced masonry walls using steel strips vol.23, pp.12, 2020, https://doi.org/10.1177/1369433220920995