DOI QR코드

DOI QR Code

Seismic reliability assessment of base-isolated structures using artificial neural network: operation failure of sensitive equipment

  • Moeindarbari, Hesamaldin (Civil and Environmental Engineering Department Amirkabir University of Technology) ;
  • Taghikhany, Touraj (Civil and Environmental Engineering Department Amirkabir University of Technology)
  • 투고 : 2017.05.24
  • 심사 : 2018.03.16
  • 발행 : 2018.05.25

초록

The design of seismically isolated structures considering the stochastic nature of excitations, base isolators' design parameters, and superstructure properties requires robust reliability analysis methods to calculate the failure probability of the entire system. Here, by applying artificial neural networks, we proposed a robust technique to accelerate the estimation of failure probability of equipped isolated structures. A three-story isolated building with susceptible facilities is considered as the analytical model to evaluate our technique. First, we employed a sensitivity analysis method to identify the critical sources of uncertainty. Next, we calculated the probability of failure for a particular set of random variables, performing Monte Carlo simulations based on the dynamic nonlinear time-history analysis. Finally, using a set of designed neural networks as a surrogate model for the structural analysis, we assessed once again the probability of the failure. Comparing the obtained results demonstrates that the surrogate model can attain precise estimations of the probability of failure. Moreover, our proposed approach significantly increases the computational efficiency corresponding to the dynamic time-history analysis of the structure.

키워드

참고문헌

  1. Adeli, H. and Jiang, X. (2006), "Dynamic fuzzy wavelet neural network model for structural system identification", J. Struct. Eng., 132(1), 102-111. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:1(102)
  2. Alhan, C. and Gavin, H.P. (2005), "Reliability of base isolation for the protection of critical equipment from earthquake hazards", Eng. Struct., 27(9), 1435-1449. https://doi.org/10.1016/j.engstruct.2005.04.007
  3. Atkinson, G.M. and Silva, W. (2000), "Stochastic modeling of California ground motions", Bull. Seismol. Soc. Am., 90(2), 255-274. https://doi.org/10.1785/0119990064
  4. Ayyub, B.M. and McCuen, R.H. (2011), Probability, Statistics, and Reliability for Engineers and Scientists, CRC press
  5. Boore, D.M. (2003), "Simulation of ground motion using the stochastic method", Pure Appl. Geophys., 160(3-4), 635-676. https://doi.org/10.1007/PL00012553
  6. Boore, D.M. and Joyner, W.B. (1991), "Estimation of ground motion at deep-soil sites in eastern North America", Bull. Seismol. Soc. Am., 81(6), 2167-2185.
  7. Boore, D.M. and Joyner, W.B. (1997), "Site amplifications for generic rock sites", Bull. Seismol. Soc. Am., 87(2), 327-341.
  8. Bucher, C. (2009), Computational Analysis of Randomness in Structural Mechanics: Structures and Infrastructures Book Series, CRC Press
  9. Bucher, C. (2015). "Analysis and design of sliding isolation pendulum systems", IABSE Symposium Report.
  10. Cardoso, J.B., de Almeida, J.R., Dias, J.M. and Coelho, P.G. (2008), "Structural reliability analysis using Monte Carlo simulation and neural networks", Adv. Eng. Softw., 39(6), 505-513. https://doi.org/10.1016/j.advengsoft.2007.03.015
  11. Castaldo, P. and Tubaldi, E. (2015), "Influence of FPS bearing properties on the seismic performance of base‐isolated structures", Earthq. Eng. Struct. Dyn., 44(15), 2817-2836 https://doi.org/10.1002/eqe.2610
  12. Chen, F., Tang, B. and Chen, R. (2013), "A novel fault diagnosis model for gearbox based on wavelet support vector machine with immune genetic algorithm", Measur., 46(1), 220-232. https://doi.org/10.1016/j.measurement.2012.06.009
  13. Chen, J., Liu, W., Peng, Y. and Li, J. (2007), "Stochastic seismic response and reliability analysis of base-isolated structures", J. Earthq. Eng., 11(6), 903-924. https://doi.org/10.1080/13632460701242757
  14. Constantinou, M., Mokha, A. and Reinhorn, A. (1990), "Teflon bearings in base isolation II: Modeling", J. Struct. Eng., 116(2), 455-474. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:2(455)
  15. Constantinou, M. and Papageorgiou, A. (1990), "Stochastic response of practical sliding isolation systems", Prob. Eng. Mech., 5(1), 27-34. https://doi.org/10.1016/0266-8920(90)90030-N
  16. Dai, H., Zhang, H. and Wang, W. (2015), "A Multiwavelet Neural Network‐Based Response Surface Method for Structural Reliability Analysis", Comput. Aid. Civil Infrastr. Eng., 30(2), 151-162. https://doi.org/10.1111/mice.12086
  17. Der Kiureghian, A. and Ang, A.S. (1975), "A line source model for seismic risk analysis", University of Illinois Engineering Experiment Station. College of Engineering. University of Illinois at Urbana-Champaign.
  18. Desai, K.M., Survase, S.A., Saudagar, P.S., Lele, S. and Singhal, R.S. (2008), "Comparison of artificial neural network (ANN) and response surface methodology (RSM) in fermentation media optimization: case study of fermentative production of scleroglucan", Biochem. Eng. J., 41(3), 266-273. https://doi.org/10.1016/j.bej.2008.05.009
  19. Ellingwood, B. and Galambos, T.V. (1983), "Probability-based criteria for structural design", Struct. Saf., 1(1), 15-26. https://doi.org/10.1016/0167-4730(82)90012-1
  20. Enevoldsen, I. and Sorensen, J.D. (1994), "Reliability-based optimization in structural engineering", Struct. Saf., 15(3), 169-196. https://doi.org/10.1016/0167-4730(94)90039-6
  21. Farooq Anjum, M., Tasadduq, I. and Al-Sultan, K. (1997), "Response surface methodology: A neural network approach", Eur. J. Operat. Res., 101(1), 65-73. https://doi.org/10.1016/S0377-2217(96)00232-9
  22. Gomes, H.M. and Awruch, A.M. (2004), "Comparison of response surface and neural network with other methods for structural reliability analysis", Struct. Saf., 26(1), 49-67. https://doi.org/10.1016/S0167-4730(03)00022-5
  23. Gosavi, A. (2003), Simulation-based Optimization: Parametric Optimization Techniques and Reinforcement Learning, Springer
  24. Gosavi, A. (2014), Simulation-based Optimization: Parametric Optimization Techniques and Reinforcement Learning, Springer
  25. Homma, T. and Saltelli, A. (1996), "Importance measures in global sensitivity analysis of nonlinear models", Reliab. Eng. Syst. Saf., 52(1), 1-17. https://doi.org/10.1016/0951-8320(96)00002-6
  26. Huang, T.L. and Ren, W.X. (2011). "Dynamic reliability-based seismic optimal design of base-isolated structures", Adv. Mater. Res., 243, 3765-3769
  27. Iman, R.L. (2008), Latin Hypercube Sampling, Wiley Online Library
  28. Jansen, M.J. (1999), "Analysis of variance designs for model output", Comput. Phys. Commun., 117(1), 35-43. https://doi.org/10.1016/S0010-4655(98)00154-4
  29. Jia, G., Gidaris, I., Taflanidis, A.A. and Mavroeidis, G.P. (2014), "Reliability-based assessment/design of floor isolation systems", Eng. Struct., 78, 41-56. https://doi.org/10.1016/j.engstruct.2014.07.031
  30. Kerh, T. and Ting, S. (2005), "Neural network estimation of ground peak acceleration at stations along Taiwan high-speed rail system", Eng. Appl. Artif. Intell., 18(7), 857-866. https://doi.org/10.1016/j.engappai.2005.02.003
  31. Lin, Y.-K. and Cai, G.-Q. (1995), Probabilistic Structural Dynamics: Advanced Theory and Applications, McGraw-Hill New York
  32. Liu, Y.Y., Ju, Y.F., Duan, C.D. and Zhao, X.F. (2011), "Structure damage diagnosis using neural network and feature fusion", Eng. Appl. Artif. Intell., 24(1), 87-92. https://doi.org/10.1016/j.engappai.2010.08.011
  33. Lomiento, G., Bonessio, N. and Benzoni, G. (2013), "Friction Model for Sliding Bearings under Seismic Excitation", J. Earthq. Eng., 17(8), 1162-1191. https://doi.org/10.1080/13632469.2013.814611
  34. Mayes, R.L. and Naeim, F. (2001), Design of Structures with Seismic Isolation, Springer
  35. McCulloch, W.S. and Pitts, W. (1943), "A logical calculus of the ideas immanent in nervous activity", Bull. Math. Biophys., 5(4), 115-133. https://doi.org/10.1007/BF02478259
  36. Moeindarbari, H., Malekzadeh, M. and Taghikhany, T. (2014), "Probabilistic analysis of seismically isolated elevated liquid storage tank using multi-phase friction bearing", Earthq. Struct., 6(1), 111-125. https://doi.org/10.12989/eas.2014.6.1.111
  37. Moeindarbari, H. and Taghikhany, T. (2014), "Seismic optimum design of triple friction pendulum bearing subjected to nearfault pulse-like ground motions", Struct. Multidisc. Optim., 50(4), 1-16. https://doi.org/10.1007/s00158-014-1051-9
  38. Mokha, A., Constantinou, M. and Reinhorn, A. (1990), "Teflon bearings in base isolation I: Testing", J. Struct. Eng., 116(2), 438-454. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:2(438)
  39. Palazzo, B., Castaldo, P. and Della Vecchia, P. (2014). "Seismic reliability analysis of base-isolated structures with friction pendulum system", Environmental Energy and Structural Monitoring Systems (EESMS), 2014 IEEE Workshop on.
  40. Papadrakakis, M. and Lagaros, N.D. (2002), "Reliability-based structural optimization using neural networks and Monte Carlo simulation", Comput. Meth. Appl. Mech. Eng., 191(32), 3491-3507. https://doi.org/10.1016/S0045-7825(02)00287-6
  41. Papadrakakis, M., Tsompanakis, Y., Lagaros, N.D. and Fragiadakis, M. (2004), "Reliability based optimization of steel frames under seismic loading conditions using evolutionary computation", J. Theor. Appl. Mech., 42(3), 585-608.
  42. Pourgharibshahi, A. and Taghikhany, T. (2012), "Reliability-based assessment of deteriorating steel moment resisting frames", J. Constr. Steel Res., 71, 219-230. https://doi.org/10.1016/j.jcsr.2011.07.019
  43. Saltelli, A., Annoni, P., Azzini, I., Campolongo, F., Ratto, M. and Tarantola, S. (2010), "Variance based sensitivity analysis of model output. Design and estimator for the total sensitivity index", Comput. Phys. Commun., 181(2), 259-270. https://doi.org/10.1016/j.cpc.2009.09.018
  44. Saltelli, A. and Sobol, I.M. (1995), "About the use of rank transformation in sensitivity analysis of model output", Reliab. Eng. Syst. Saf., 50(3), 225-239. https://doi.org/10.1016/0951-8320(95)00099-2
  45. Saltelli, A. and Tarantola, S. (2002), "On the relative importance of input factors in mathematical models: safety assessment for nuclear waste disposal", J. Am. Stat. Assoc., 97(459), 702-709. https://doi.org/10.1198/016214502388618447
  46. Schmidhuber, J. (2015), "Deep learning in neural networks: An overview", Neur. Network., 61 85-117. https://doi.org/10.1016/j.neunet.2014.09.003
  47. Shahbazi, P. and Taghikhany, T. (2017), "Sensitivity analysis of variable curvature friction pendulum isolator under near-fault ground motions", Smart Struct. Syst., 20(1), 23-33. https://doi.org/10.12989/sss.2017.20.1.023
  48. Sobol', I.Y.M. (2007), "Global sensitivity indices for the investigation of nonlinear mathematical models", Matematicheskoe Modelirovanie, 19(11), 23-24.
  49. Steele, C. (2008), "Use of the lognormal distribution for the coefficients of friction and wear", Reliab. Eng. Syst. Saf., 93(10), 1574-1576. https://doi.org/10.1016/j.ress.2007.09.005
  50. Su, L. and Ahmadi, G. (1988), "Response of frictional base isolation systems to horizontal-vertical random earthquake excitations", Prob. Eng. Mech., 3(1), 12-21. https://doi.org/10.1016/0266-8920(88)90003-3
  51. Taflanidis, A.A. and Jia, G. (2011), "A simulation-based framework for risk assessment and probabilistic sensitivity analysis of base‐isolated structures", Earthq. Eng. Struct. Dyn., 40(14), 1629-1651. https://doi.org/10.1002/eqe.1113
  52. Veitch, D. (2005), "Wavelet Neural Networks and their application in the study of dynamical systems", Department of Mathematics University of York, UK.
  53. Vrouwenvelder, T. (1997), "The JCSS probabilistic model code", Struct. Saf., 19(3), 245-251. https://doi.org/10.1016/S0167-4730(97)00008-8
  54. Wilamowski, B.M., Iplikci, S., Kaynak, O. and Efe, M.O. (2001). "An algorithm for fast convergence in training neural networks", Proceedings of the International Joint Conference on Neural Networks.
  55. Zayas, V.A., Low, S.S. and Mahin, S.A. (1990), "A simple pendulum technique for achieving seismic isolation", Earthq. Spectra., 6(2), 317-333. https://doi.org/10.1193/1.1585573
  56. Zou, X.K., Wang, Q., Li, G. and Chan, C.M. (2010), "Integrated reliability-based seismic drift design optimization of baseisolated concrete buildings", J. Struct. Eng., 136(10), 1282-1295. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000216

피인용 문헌

  1. A novel risk assessment approach for data center structures vol.19, pp.6, 2018, https://doi.org/10.12989/eas.2020.19.6.471