Steel and Composite Structures

  • 제27권4호
  • /
  • Pages.427-438
  • /
  • 2018
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Multi-objective optimization of tapered tubes for crashworthiness by surrogate methodologies

  • Asgari, Masoud (Faculty of Mechanical Engineering, K.N. Toosi University of Technology) ;
  • Babaee, Alireza (Faculty of Mechanical Engineering, K.N. Toosi University of Technology) ;
  • Jamshidi, Mohammadamin (Faculty of Mechanical Engineering, K.N. Toosi University of Technology)
  • 투고 : 2017.03.31
  • 심사 : 2018.03.17
  • 발행 : 2018.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, the single and multi-objective optimization of thin-walled conical tubes with different types of indentations under axial impact has been investigated using surrogate models called metamodels. The geometry of tapered thin-walled tubes has been studied in order to achieve maximum specific energy absorption (SEA) and minimum peak crushing force (PCF). The height, radius, thickness, tapered angle of the tube, and the radius of indentation have been considered as design variables. Based on the design of experiments (DOE) method, the generated sample points are computed using the explicit finite element code. Different surrogate models including Kriging, Feed Forward Neural Network (FNN), Radial Basis Neural Network (RNN), and Response Surface Modelling (RSM) comprised to evaluate the appropriation of such models. The comparison study between surrogate models and the exploration of indentation shapes have been provided. The obtained results show that the RNN method has the minimum mean squared error (MSE) in training points compared to the other methods. Meanwhile, optimization based on surrogate models with lower values of MSE does not provide optimum results. The RNN method demonstrates a lower crashworthiness performance (with a lower value of 125.7% for SEA and a higher value of 56.8% for PCF) in comparison to RSM with an error order of $10^{-3}$. The SEA values can be increased by 17.6% and PCF values can be decreased by 24.63% by different types of indentation. In a specific geometry, higher SEA and lower PCF require triangular and circular shapes of indentation, respectively.

키워드

참고문헌

  1. Abramowicz, W. and Jones, N. (1984), "Dynamic axial crushing of square tubes", Int. J. Impact Eng., 2(2), 179-208. https://doi.org/10.1016/0734-743X(84)90005-8
  2. Acar, E., Guler, M.A., Gerçeker, B., Cerit, M.E. and Bayram, B. (2011), "Multi-objective crashworthiness optimization of tapered thin-walled tubes with axisymmetric indentations", Thin-Wall. Struct., 49(1), 94-105.
  3. Ambrosio, J.A.C. (2001), Crashworthiness, Springer-Verlag Wien.
  4. Azimi, M.B. and Asgari, M. (2016a), "A new bi-tubular conical-circular structure for improving crushing behavior under axial and oblique impacts", Int. J. Mech. Sci., 105, 253-265. https://doi.org/10.1016/j.ijmecsci.2015.11.012
  5. Azimi, M.B. and Asgari, M. (2016b), "Energy absorption characteristics and a meta-model of miniature frusta under axial impact", Int. J. Crashworth., 21(3), 222-230. https://doi.org/10.1080/13588265.2016.1164445
  6. Baroutaji, A., Gilchrist, M., Smyth, D. and Olabi, A.-G. (2015), "Crush analysis and multi-objective optimization design for circular tube under quasi-static lateral loading", Thin-Wall. Struct., 86, 121-131. https://doi.org/10.1016/j.tws.2014.08.018
  7. Baykasoglu, A. and Baykasoglu, C. (2016), "Crashworthiness optimization of circular tubes with functionally-graded thickness", Eng. Computat., 33(5), 1560-1585. https://doi.org/10.1108/EC-08-2015-0245
  8. Baykasoglu, A. and Baykasoglu, C. (2017), "Multiple objective crashworthiness optimization of circular tubes with functionally graded thickness via artificial neural networks and genetic algorithms", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 231(11), 2005-2016. https://doi.org/10.1177/0954406215627181
  9. Baykasoglu, C. and Cetin, M.T. (2015), "Energy absorption of circular aluminium tubes with functionally graded thickness under axial impact loading", Int. J. Crashworth., 20(1), 95-106. https://doi.org/10.1080/13588265.2014.982269
  10. Esfahlani, S.S., Shirvani, H., Shirvani, A., Nwaubani, S., Mebrahtu, H. and Chirwa, C. (2013), "Hexagonal honeycomb cell optimisation by way of meta-model techniques", Int. J. Crashworth., 18(3), 264-275. https://doi.org/10.1080/13588265.2013.776337
  11. Fang, J., Sun, G., Qiu, N., Kim, N.H. and Li, Q. (2017), "On design optimization for structural crashworthiness and its state of the art", Struct. Multidiscipl. Optimiz., 55(3), 1091-1119. https://doi.org/10.1007/s00158-016-1579-y
  12. Gu, X., Dai, J., Huang, X. and Li, G. (2017), "Reliable optimisation design of vehicle structure crashworthiness under multiple impact cases", Int. J. Crashworth., 22(1), 26-37. https://doi.org/10.1080/13588265.2016.1215585
  13. Guler, M.A., Cerit, M.E., Bayram, B., Gerçeker, B. and Karakaya, E. (2010), "The effect of geometrical parameters on the energy absorption characteristics of thin-walled structures under axial impact loading", Int. J. Crashworth., 15(4), 377-390. https://doi.org/10.1080/13588260903488750
  14. Gupta, N.K., Sheriff, N.M. and Velmurugan, R. (2006), "A study on buckling of thin conical frusta under axial loads, Thin-Walled Structures", 44(9), 986-996. https://doi.org/10.1016/j.tws.2006.08.010
  15. Hanssen, A.G., Langseth, M. and Hopperstad, O.S. (2000), "Static and dynamic crushing of circular aluminium extrusions with aluminium foam filler", Int. J. Impact Eng., 24(5), 475-507. https://doi.org/10.1016/S0734-743X(99)00170-0
  16. Hosseinipour, S.J. and Daneshi, G.H. (2003), "Energy absorbtion and mean crushing load of thin-walled grooved tubes under axial compression", Thin-Wall. Struct., 41(1), 31-46. https://doi.org/10.1016/S0263-8231(02)00099-X
  17. Khalkhali, A. and Samareh Mousavi, S. (2012), "Multi-objective Crashworthiness Optimization of the Aluminum Foam-filled Tubes", Int. J. Automot. Eng., 2(3), 193-206.
  18. Khayat, M., Poorveis, D. and Moradi, S. (2017), "Buckling analysis of functionally graded truncated conical shells under external displacement-dependent pressure", Steel Compos. Struct., Int. J., 23(1), 1-16. https://doi.org/10.12989/scs.2017.23.1.001
  19. Kim, S.K., Hwang, K.H.I.C.S. and Yang, I.Y. (2002), "A Study on Experimental Characteristics of Energy Absorption Control in Thin-Walled Tubes for the Use of Vehicular Structure Members", Int. J. Automot. Technol., 3(4), 137-145.
  20. Koziel, S., Ciaurri, D.E. and Leifsson, L. (2011), Surrogate-Based Methods, Springer Berlin Heidelberg, Berlin, Heidelberg, Germany.
  21. Lophaven, S.N., Nielsen, H.B. and Sondergaard, J. (2002), DACEA MATLAB Kriging Toolbox, Technical University of Denmark, Lyngby, Denmark.
  22. MacLeod, C. (2010), An Introduction to Practical Neural Networks and Genetic Algorithms For Engineers and Scientists, The Robert Gordon University.
  23. Mahmoodi, A., Shojaeefard, M.H. and Saeidi Googarchin, H. (2016), "Theoretical development and numerical investigation on energy absorption behavior of tapered multi-cell tubes", Thin-Wall. Struct., 102, 98-110. https://doi.org/10.1016/j.tws.2016.01.019
  24. Mamalis, A., Manolakos, D., Ioannidis, M. and Kostazos, P. (2005), "Numerical simulation of thin-walled metallic circular frusta subjected to axial loading", Int. J. Crashworth., 10(5), 505-513. https://doi.org/10.1533/ijcr.2005.0365
  25. Marzbanrad, J., Abdollahpoor, A. and Mashadi, B. (2009), "Effects of the triggering of circular aluminum tubes on crashworthiness", Int. J. Crashworth., 14(6), 591-599. https://doi.org/10.1080/13588260902896458
  26. Myers, R.H., Montgomery, D.C. and Anderson-Cook, C.M. (2009), Response Surface Methodology: Process and Product Optimization Using Designed Experiments, Wiley.
  27. Nagel, G. (2005), Impact and Energy Absorption of Straight and Tapered Rectangular Tubes, Queensland University of Technology, Brisbane, Australia.
  28. Najafi, A. (2009), Axial Collapse of Thin-walled, Multi-corner Single-and multi-cell Tubes, Mississippi State University, Starkville, MS, USA.
  29. Park, J.-S. (1994), "Optimal Latin-hypercube designs for computer experiments", J. Statist. Plan. Infer., 39(1), 95-111. https://doi.org/10.1016/0378-3758(94)90115-5
  30. Qi, C., Yang, S. and Dong, F. (2012), "Crushing analysis and multiobjective crashworthiness optimization of tapered square tubes under oblique impact loading", Thin-Wall. Struct., 59, 103-119. https://doi.org/10.1016/j.tws.2012.05.008
  31. The ANSYS Inc. (2009), ANSYS user's guide and reference guide.
  32. Vinayagar, K. and Senthil Kumar, A. (2017), "Multi-response optimization of crashworthiness parameters of bi-tubular structures", Steel Compos. Struct., Int. J., 23(1), 31-40. https://doi.org/10.12989/scs.2017.23.1.031
  33. Wallis, W.D. and George, J.C. (2010), Introduction to Combinatorics, CRC Press.
  34. Zarei, H.R. and Kröger, M. (2006), "Multiobjective crashworthiness optimization of circular aluminum tubes", Thin-Wall. Struct., 44(3), 301-308.
  35. Zhang, X. and Huh, H. (2009), "Energy absorption of longitudinally grooved square tubes under axial compression", Thin-Wall. Struct., 47(12), 1469-1477. https://doi.org/10.1016/j.tws.2009.07.003
  36. Zhang, X., Cheng, G., You, Z. and Zhang, H. (2007), "Energy absorption of axially compressed thin-walled square tubes with patterns", Thin-Wall. Struct., 45(9), 737-746. https://doi.org/10.1016/j.tws.2007.06.004
  37. Zhang, Z., Liu, S. and Tang, Z. (2010), "Crashworthiness investigation of kagome honeycomb sandwich cylindrical column under axial crushing loads", Thin-Wall. Struct., 48(1), 9-18. https://doi.org/10.1016/j.tws.2009.08.002
  38. Zhang, Y., Sun, G., Xu, X., Li, G. and Li, Q. (2014), "Multiobjective crashworthiness optimization of hollow and conical tubes for multiple load cases", Thin-Wall. Struct., 82, 331-342. https://doi.org/10.1016/j.tws.2014.05.006

피인용 문헌

  1. Optimization of a composite beam for high-speed railroads vol.37, pp.4, 2018, https://doi.org/10.12989/scs.2020.37.4.493