DOI QR코드

DOI QR Code

Seismic behaviors of ring beams joints of steel tube-reinforced concrete column structure

  • Zhang, Yingying (State Key Laboratory for Geomechanics and Deep Underground Engineering, Jiangsu Key Laboratory of Environmental Impact and Structural Safety in Engineering, China University of Mining and Technology) ;
  • Pei, Jianing (State Key Laboratory for Geomechanics and Deep Underground Engineering, Jiangsu Key Laboratory of Environmental Impact and Structural Safety in Engineering, China University of Mining and Technology) ;
  • Huang, Yuan (State Key Laboratory for Geomechanics and Deep Underground Engineering, Jiangsu Key Laboratory of Environmental Impact and Structural Safety in Engineering, China University of Mining and Technology) ;
  • Lei, Ke (China Construction Eighth Engineering Divisions Corp. Ltd.) ;
  • Song, Jie (State Key Laboratory for Geomechanics and Deep Underground Engineering, Jiangsu Key Laboratory of Environmental Impact and Structural Safety in Engineering, China University of Mining and Technology) ;
  • Zhang, Qilin (College of Civil Engineering, Tongji University)
  • 투고 : 2017.11.21
  • 심사 : 2018.03.17
  • 발행 : 2018.05.25

초록

This paper presents the seismic behaviors and restoring force model of ring beam joints of steel tube-reinforced concrete column structure under cyclic loading. First, the main failure mode, ultimate bearing capacity, stiffness degradation and energy dissipation capacity are studied. Then, the effects of concrete grade, steel grade, reinforcement ratio and radius-to-width ratios are discussed. Finally, the restoring force model is proposed. Results show that the ring beam joints of steel tube-reinforced concrete column structure performs good seismic performances. With concrete grade increasing, the ultimate bearing capacity and energy dissipation capacity increase, while the stiffness degradation rates increases slightly. When the radius-width ratio is 2, with reinforcement ratio increasing, the ultimate bearing capacity decreases. However, when the radius-to-width ratios are 3, with reinforcement ratio increasing, the ultimate bearing capacity increases. With radius-to-width ratios increasing, the ultimate bearing capacity decreases slightly and the stiffness degradation rate increases, but the energy dissipation capacity increases slightly.

키워드

참고문헌

  1. Cao, W., Hui, C., Dong, H., Xu, F. and Qiao, Q. (2013), "Study on seismic behavior of bottom strengthened rectangular steel tube reinforced concrete columns", World Earthq. Eng., 29(3), 14-19.
  2. CECS (2005), Technical specification for steel tube-reinforced concrete column structure, China Planning Press, Beijing, China.
  3. Clough, R.W. (1966), Effect of Stiffness Degradation on Earthquake Ductility Requirements, University of California.
  4. Dong, C.X., Kwan, A.K.H. and Ho, J.C.M. (2017), "Effects of external confinement on structural performance of concretefilled steel tubes", J. Const. Steel Res., 132, 72-82. https://doi.org/10.1016/j.jcsr.2016.12.024
  5. Jeddi, M.Z., Sulong, N.H.R. and Khanouki, M.M.A. (2016), "Seismic performance of a new through rib stiffener beam connection to concrete-filled steel tubular columns: An experimental study", Eng. Struct., 131(15), 477-491.
  6. Kara, I.F., Ashour, A.F. and Koroglu, M.A. (2015), "Flexural behavior of hybrid FRP/steel reinforced concrete beams", Compos. Struct., 129, 111-121. https://doi.org/10.1016/j.compstruct.2015.03.073
  7. Kasar, A.A., Bharti, S.D., Shrimali, M.K. and Goswami, R. (2017), "Mechanics based force-deformation curve of steel beam to column moment joints", Steel Compos. Struct., Int. J., 25(1), 19-34.
  8. Kwan, A.K.H., Dong, C.X. and Ho, J.C.M. (2016), "Axial and lateral stress-strain model for circular concrete-filled steel tubes with external steel confinement", Eng. Struct., 117(15), 528-541. https://doi.org/10.1016/j.engstruct.2016.03.026
  9. Li, Y. and Liao, F. (2013), "Behaviour of Concrete Filled Steel Tube Reinforced Concrete Columns Subjected to Long-term Sustained Loading", J. Beijing Univ. Technol., 36(2), 79-86.
  10. Li, H., Wang, Z. and Wu, B. (1999), "Analysis on Axial Loading Distribution and Limitation of Nominal Axial Compression Ratio of Laminated Column With High Strength Concrete Filled Steel Tube", World Info. Earthq. Eng., 15(2), 1-8.
  11. Lee, J. and Fenves, G.L. (1998), "Plastic-Damage Model for Cyclic Loading of Concrete Structures", J. Eng. Mech., 124(8), 892-900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892)
  12. MOHURD (2010), Code for design of concrete structures; Beijing, China.
  13. MOHURD (2015), Specification for seismic test of building; China Architecture & Building Press, Beijing, China.
  14. Mollazadeh, M.H. and Wang, Y.C. (2016), "New Mechanism of Load Introduction into Concrete-Filled Steel Tubular Columns", J. Struct. Eng., 142(6), 4016016. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001470
  15. Neuenschwander, M., Knobloch, M. and Fontana, M. (2016), "ISO Standard Fire Tests of Concrete-Filled Steel Tube Columns with Solid Steel Core", J. Struct. Eng., 143(4), 4016211.
  16. Neuenschwander, M., Knobloch, M. and Fontana, M. (2017), "Modeling thermo-mechanical behavior of concrete-filled steel tube columns with solid steel core subjected to fire", Eng. Struct., 136(1), 180-193. https://doi.org/10.1016/j.engstruct.2017.01.017
  17. Nie, J. (2011), Composite Structures of Steel and Concrete: Theory and Practice, Architecture &Building Press, Beijing, China.
  18. Nie, J., Wang, Y. and Fan, J. (2012), "Experimental study on seismic behavior of concrete filled steel tube columns under pure torsion and compression-torsion cyclic load", J. Constr. Steel Res., 79(1), 115-126. https://doi.org/10.1016/j.jcsr.2012.07.029
  19. Prashob, P.S., Shashikala, A.P. and Somasundaran, T.P. (2017), "Behaviour of carbon fiber reinforced polymer strengthened tubular joints", Steel Compos. Struct., Int. J., 24(4), 383-390.
  20. Qian, J. and Jiang, Y. (2009), "Tests on seismic behavior of RC beam-composite steel tube confined concrete column joints", Build. Struct., 39(9), 39-42.
  21. Shakir, A.S., Guan, Z.W. and Jones, S.W. (2016), "Lateral impact response of the concrete filled steel tube columns with and without CFRP strengthening", Eng. Struct., 116, 148-162. https://doi.org/10.1016/j.engstruct.2016.02.047
  22. Skalomenos, K.A., Hatzigeorgiou, G.D. and Beskos, D.E. (2015), "Modeling level selection for seismic analysis of concrete‐filled steel tube/moment‐resisting frames by using fragility curves", Earthq. Eng. Struct. Dyn., 44(2), 199-220. https://doi.org/10.1002/eqe.2465
  23. Wang, W., Tang, Z., Li, Z. and Ma, H. (2016), "Bearing Capacities of Different-Diameter Concrete-Filled Steel Tubes under Axial Compression", Adv. Mater. Sci. Eng., 2016(473), 1-10.
  24. Wang, Y., Shao, Y., Song, S. and Yang, D. (2017), "Static test on failure process of tubular T-joints with initial fatigue crack", Steel Compos. Struct., Int. J., 24(5), 615-633.
  25. Wu, X.U., Qing, Y.U. and Guohuang, Y.A.O. (2014), "Effect of preload on the axial capacity of CFST reinforced concrete columns", J. Tsinghua Univ., 54(5), 556-562.
  26. Yu, M., Zha, X., Ye, J. and Li, Y. (2013), "A unified formulation for circle and polygon concrete-filled steel tube columns under axial compression", Eng. Struct., 49(2), 1-10. https://doi.org/10.1016/j.engstruct.2012.10.018
  27. Zhong, S. (2003), The Concrete-Filled Steel Tube Structures, Tsinghua University Press, Beijing, China.

피인용 문헌

  1. Numerical study of concrete-encased CFST under preload followed by sustained service load vol.35, pp.1, 2018, https://doi.org/10.12989/scs.2020.35.1.093