DOI QR코드

DOI QR Code

Finite element investigation of the joints in precast concrete pavement

  • 투고 : 2017.03.11
  • 심사 : 2018.01.28
  • 발행 : 2018.05.25

초록

This paper measures the mechanical response of precast pavement joints under moving axle loads using the finite-element method, and the models were validated with results of field tests. In order to increase the ability to use the non-linear FE analysis for design and assessment of precast pavement subjected to moving axle load, this paper investigated the effects of different load transfer between the slabs using the ABAQUS finite-element package to solve the nonlinear explicit model equations. The assembly of the panels using dowels and groove-tongue keys has been studied to assess the efficiency of keyway joint system. Concrete damage plasticity model was used to calculate the effects of permanent damages related to the failure mechanisms. With aggregate interlock as the only load transferring system, Load transfer efficiency (LTE) is not acceptable when the axle load reaches to slab joints. The Finite-element modelling (FEM) results showed that keyway joints significantly reduced tensile stresses developed at the mid-slab. Increasing the thickness of the tongue the LTE was improved but with increasing the height of the tongue the LTE was decreased. Stresses are transferred to the adjacent slab efficiently when dowels are embedded within the model. When the axle load approaches joints, tensile damage occurs sooner than compressive damage, but the damage rate remains constant, then compressive damage increases significantly and become the major form of distress under the dowels.

키워드

참고문헌

  1. AASHTO, G. (1993), Guide for Design of Pavement Structures, American Association of State Highway and Transportation Officials, Washington, DC.
  2. Abo-Qudais, S.A. and Al-Qadi, I.L. (2000), "Dowel bars corrosion in concrete pavement", Can. J. Civil Eng., 27(6), 1240-1247. https://doi.org/10.1139/l00-035
  3. Ashtiani, R.S. and De Haro, G. (2016), "Temperature sensitivity of precast concrete panels used for the repair of rigid pavements", International Conference on Transportation and Development.
  4. Channakeshava, C., Barzegar, F. and Voyiadjis, G.Z. (1993), "Nonlinear FE analysis of plain concrete pavements with doweled joints", J. Tran. Eng., 119(5), 763-781. https://doi.org/10.1061/(ASCE)0733-947X(1993)119:5(763)
  5. de Larrard, F., Sedran, T. and Balay, J.M. (2013), "Removable urban pavements: an innovative, sustainable technology", Int. J. Pave. Eng., 14(1), 1-11. https://doi.org/10.1080/10298436.2011.634912
  6. Gopalaratnam, V., Davis, B.M., Dailey, C.L.and Luckenbill, G.C. (2007), Performance Evaluation of Precast Prestressed Concrete Pavement.
  7. Hesami, S. and Sadeghi, V. (2015), "Numerical investigation of the shape memory alloy dowels in jointed concrete pavements", Int. J. Pave. Res. Technol., 8(4), 251.
  8. Ioannides, A.M. and Korovesis, G.T. (1992), "Analysis and design of doweled slab-on-grade pavement systems", J. Tran. Eng., 118(6), 745-768. https://doi.org/10.1061/(ASCE)0733-947X(1992)118:6(745)
  9. Kim, J. and Hjelmstad, K.D. (2003), "Three-dimensional finite element analysis of doweled joints for airport pavements", Tran. Res. Record: J. Tran. Res. Board, 1853(1), 100-109. https://doi.org/10.3141/1853-12
  10. Lee, J. and Fenves, G.L. (1998), "Plastic-damage model for cyclic loading of concrete structures", J. Eng. Mech., 124(8), 892-900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892)
  11. Littleton, P. and Mallela, J. (2014), Florida Demonstration Project: Precast Concrete Pavement System on US 92,
  12. Merritt, D.K. (2000), "The feasibility of using precast concrete panels to expedite highway pavement construction", Center for Transportation Research, University of Texas at Austin.
  13. Mohamad, M.E., Ibrahim, I.S., Abdullah, R., Rahman, A.B. Abd, Kueh, A.B.H. and Usman, J. (2015), "Friction and cohesion coefficients of composite concrete-to-concrete bond", Cement Concrete Compos., 56, 1-14. https://doi.org/10.1016/j.cemconcomp.2014.10.003
  14. Mokhatar, S., Abdullah, R. and Kueh, A. (2013), "Computational impact responses of reinforced concrete slabs", Comput. Concrete, 12(1), 37-51. https://doi.org/10.12989/cac.2013.12.1.037
  15. Nejad, F.M., Ghafari, S. and Afandizadeh, S. (2013), "Numerical analysis of thermal and composite stresses in prestressed concrete pavements", Comput. Concrete, 11(2), 169-182. https://doi.org/10.12989/cac.2013.11.2.169
  16. Peng, P., Wu, D.F., Tian, B. and Niu, K.M. (2014), Precast Pavement Smoothness Control Method, Applied Mechanics and Materials, Trans Tech Publ.
  17. Priddy, L.P., Bly, P.G., Jackson, C.J. and Flintsch, G.W. (2014), "Full-scale field testing of precast Portland cement concrete panel airfield pavement repairs", Int. J. Pave. Eng., 15(9), 840-853. https://doi.org/10.1080/10298436.2014.893320
  18. Priddy, L.P., Pittman, D.W. and Flintsch, G.W. (2014), "Load transfer characteristics of precast Portland cement concrete panels for airfield pavement repairs", Tran. Res. Record, 2456, 42-53. https://doi.org/10.3141/2456-05
  19. Sadeghi, V. and Hesami, S. (2017), "Investigation of load transfer efficiency in jointed plain concrete pavements (JPCP) using FEM", International Journal of Pavement Research and Technology.
  20. Sargand, S. and Breegle, D. (1998), "Three-dimensional finite element software development and verification case study", First National Symposium of 3D Finite Element for Pavement Analysis and Design.
  21. Shoukry, S., Martinelli, D. and Reigle, J. (1997), "Universal pavement distress evaluator based on fuzzy sets", Tran. Res. Record: J. Tran. Res. Board, 1592, 180-186. https://doi.org/10.3141/1592-20
  22. Shoukry, S.N., Fahmy, M., Prucz, J. and William, G. (2007), "Validation of 3DFE analysis of rigid pavement dynamic response to moving traffic and nonlinear temperature gradient effects", Int. J. Geomech., 7(1), 16-24. https://doi.org/10.1061/(ASCE)1532-3641(2007)7:1(16)
  23. Shoukry, S.N., William, G. and Riad, M. (2002), "Characteristics of concrete contact stresses in doweled transverse joints", Int. J. Pave. Eng., 3(2), 117-129. https://doi.org/10.1080/1029843021000004024
  24. Smadi, M. and Belakhdar, K. (2007), "Nonlinear finite element analysis of high strength concrete slabs", Comput. Concrete, 4(3), 187-206. https://doi.org/10.12989/cac.2007.4.3.187
  25. Tayabji, S. (2015), Precast Concrete Pavement Implementation by US Highway Agencies.
  26. Tayabji, S. and Hall, K. (2008), Precast Concrete Panels for Repair and Rehabilitation of Jointed Concrete Pavements, CPTP TechBrief.
  27. Tayabji, S., Ye, D. and Buch, N. (2013), Precast Concrete Pavement Technology, Transportation Research Board.
  28. Teller, L.W. and Cashell, H.D. (1959), Performance of Doweled Joints under Repetitive Loading, Highway Research Board Bulletin.
  29. William, G.W. and Shoukry, S.N. (2001), "3D finite element analysis of temperature-induced stresses in dowel jointed concrete pavements", Int. J. Geomech., 1(3), 291-307. https://doi.org/10.1061/(ASCE)1532-3641(2001)1:3(291)