DOI QR코드

DOI QR Code

The effect of root canal preparation on the surface roughness of WaveOne and WaveOne Gold files: atomic force microscopy study

  • Received : 2017.11.13
  • Accepted : 2018.01.09
  • Published : 2018.02.02

Abstract

Objectives: To examine the surface topography of intact WaveOne (WO; Dentsply Sirona Endodontics) and WaveOne Gold (WOG; Dentsply Sirona Endodontics) nickel-titanium rotary files and to evaluate the presence of alterations to the surface topography after root canal preparations of severely curved root canals in molar teeth. Materials and Methods: Forty-eight severely curved canals of extracted molar teeth were divided into 2 groups (n = 24/each group). In group 1, the canals were prepared using WO and in group 2, the canals were prepared using WOG files. After the preparation of 3 root canals, instruments were subjected to atomic force microscopy analysis. Average roughness and root mean square values were chosen to investigate the surface features of endodontic files. The data was analyzed using one-way analysis of variance and post hoc Tamhane's tests at 5% significant level. Results: The surface roughness values of WO and WOG files significantly changed after use in root canals (p < 0.05). The used WOG files exhibited higher surface roughness change when compared with the used WO files (p < 0.05). Conclusions: Using WO and WOG Primary files in 3 root canals affected the surface topography of the files. After being used in root canals, the WOG files showed a higher level of surface porosity value than the WO files.

Keywords

References

  1. Walia HM, Brantley WA, Gerstein H. An initial investigation of the bending and torsional properties of Nitinol root canal fles. J Endod 1988;14:346-351. https://doi.org/10.1016/S0099-2399(88)80196-1
  2. Plotino G, Grande NM, Cordaro M, Testarelli L, Gambarini G. A review of cyclic fatigue testing of nickel- titanium rotary instruments. J Endod 2009;35:1469-1476. https://doi.org/10.1016/j.joen.2009.06.015
  3. Gambarini G, Grande NM, Plotino G, Somma F, Garala M, De Luca M, Testarelli L. Fatigue resistance of engine-driven rotary nickel-titanium instruments produced by new manufacturing methods. J Endod 2008;34:1003-1005. https://doi.org/10.1016/j.joen.2008.05.007
  4. Plotino G, Ahmed HM, Grande NM, Cohen S, Bukiet F. Current assessment of reciprocation in endodontic preparation: a comprehensive review--Part II: properties and efectiveness. J Endod 2015;41:1939-1950. https://doi.org/10.1016/j.joen.2015.08.018
  5. Karatas E, Arslan H, Buker M, Seckin F, Capar ID. Efect of movement kinematics on the cyclic fatigue resistance of nickel-titanium instruments. Int Endod J 2016;49:361-364. https://doi.org/10.1111/iej.12453
  6. De-Deus G, Moreira EJ, Lopes HP, Elias CN. Extended cyclic fatigue life of F2 ProTaper instruments used in reciprocating movement. Int Endod J 2010;43:1063-1068. https://doi.org/10.1111/j.1365-2591.2010.01756.x
  7. Pedullà E, Grande NM, Plotino G, Gambarini G, Rapisarda E. Infuence of continuous or reciprocating motion on cyclic fatigue resistance of 4 diferent nickel-titanium rotary instruments. J Endod 2013;39:258-261. https://doi.org/10.1016/j.joen.2012.10.025
  8. Gutmann JL, Gao Y. Alteration in the inherent metallic and surface properties of nickel-titanium root canal instruments to enhance performance, durability and safety: a focused review. Int Endod J 2012;45:113-128. https://doi.org/10.1111/j.1365-2591.2011.01957.x
  9. Plotino G, Grande NM, Cotti E, Testarelli L, Gambarini G. Blue treatment enhances cyclic fatigue resistance of vortex nickel-titanium rotary fles. J Endod 2014;40:1451-1453. https://doi.org/10.1016/j.joen.2014.02.020
  10. Hieawy A, Haapasalo M, Zhou H, Wang ZJ, Shen Y. Phase transformation behavior and resistance to bending and cyclic fatigue of ProTaper Gold and ProTaper Universal instruments. J Endod 2015;41:1134-1138. https://doi.org/10.1016/j.joen.2015.02.030
  11. Plotino G, Grande NM, Mercade Bellido M, Testarelli L, Gambarini G. Infuence of temperature on cyclic fatigue resistance of ProTaper Gold and ProTaper Universal rotary fles. J Endod 2017;43:200-202. https://doi.org/10.1016/j.joen.2016.10.014
  12. Gambarini G. Cyclic fatigue of ProFile rotary instruments afer prolonged clinical use. Int Endod J 2001;34:386-389. https://doi.org/10.1046/j.1365-2591.2001.00259.x
  13. Plotino G, Grande NM, Sorci E, Malagnino VA, Somma F. A comparison of cyclic fatigue between used and new Mtwo Ni-Ti rotary instruments. Int Endod J 2006;39:716-723. https://doi.org/10.1111/j.1365-2591.2006.01142.x
  14. Yamazaki-Arasaki A, Cabrales R, Santos M, Kleine B, Prokopowitsch I. Topography of four diferent endodontic rotary systems, before and afer being used for the 12th time. Microsc Res Tech 2012;75:97-102. https://doi.org/10.1002/jemt.21021
  15. Plotino G, Grande NM, Porciani PF. Deformation and fracture incidence of Reciproc instruments: a clinical evaluation. Int Endod J 2015;48:199-205. https://doi.org/10.1111/iej.12302
  16. Topuz O, Aydin C, Uzun O, Inan U, Alacam T, Tunca YM. Structural efects of sodium hypochlorite solution on RaCe rotary nickel-titanium instruments: an atomic force microscopy study. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2008;105:661-665. https://doi.org/10.1016/j.tripleo.2007.11.006
  17. Valois CR, Silva LP, Azevedo RB. Atomic force microscopy study of stainless-steel and nickel-titanium fles. J Endod 2005;31:882-885. https://doi.org/10.1097/01.don.0000164132.27285.2c
  18. Fayyad DM, Mahran AH. Atomic force microscopic evaluation of nanostructure alterations of rotary NiTi instruments afer immersion in irrigating solutions. Int Endod J 2014;47:567-573. https://doi.org/10.1111/iej.12189
  19. Kosti E, Zinelis S, Molyvdas I, Lambrianidis T. Efect of root canal curvature on the failure incidence of ProFile rotary Ni-Ti endodontic instruments. Int Endod J 2011;44:917-925. https://doi.org/10.1111/j.1365-2591.2011.01900.x
  20. Pruett JP, Clement DJ, Carnes DL Jr. Cyclic fatigue testing of nickel-titanium endodontic instruments. J Endod 1997;23:77-85. https://doi.org/10.1016/S0099-2399(97)80250-6
  21. Sattapan B, Nervo GJ, Palamara JE, Messer HH. Defects in rotary nickel-titanium fles afer clinical use. J Endod 2000;26:161-165. https://doi.org/10.1097/00004770-200003000-00008
  22. Alapati SB, Brantley WA, Svec TA, Powers JM, Mitchell JC. Scanning electron microscope observations of new and used nickel-titanium rotary fles. J Endod 2003;29:667-669. https://doi.org/10.1097/00004770-200310000-00014
  23. Alapati SB, Brantley WA, Svec TA, Powers JM, Nusstein JM, Daehn GS. SEM observations of nickel- titanium rotary endodontic instruments that fractured during clinical use. J Endod 2005;31:40-43.
  24. Inan U, Aydin C, Uzun O, Topuz O, Alacam T. Evaluation of the surface characteristics of used and new ProTaper Instruments: an atomic force microscopy study. J Endod 2007;33:1334-1337. https://doi.org/10.1016/j.joen.2007.07.014
  25. Turker SA, Saglam BC, Kocak MM, Kocak S. The efect of glide path on the surface quality of new and used rotary and reciprocating single fles: OneShape versus WaveOne. Scanning 2014;36:608-613. https://doi.org/10.1002/sca.21161
  26. Caballero H, Rivera F, Salas H. Scanning electron microscopy of superfcial defects in Twisted fles and Reciproc nickel-titanium fles afer use in extracted molars. Int Endod J 2015;48:229-235. https://doi.org/10.1111/iej.12304
  27. Cazaux J. Recent developments and new strategies in scanning electron microscopy. J Microsc 2005;217:16-35. https://doi.org/10.1111/j.0022-2720.2005.01414.x
  28. Fatma Y, Ozgur U. Evaluation of surface topography changes in three NiTi fle systems using rotary and reciprocal motion: an atomic force microscopy study. Microsc Res Tech 2014;77:177-182. https://doi.org/10.1002/jemt.22325
  29. Yang GB, Zhou XD, Zhang H, Wu HK. Shaping ability of progressive versus constant taper instruments in simulated root canals. Int Endod J 2006;39:791-799. https://doi.org/10.1111/j.1365-2591.2006.01151.x
  30. Hülsmann M, Peters OA, Dummer PM. Mechanical preparation of root canals: shaping goals, techniques and means. Endod Topics 2005;10:30-76. https://doi.org/10.1111/j.1601-1546.2005.00152.x
  31. Kum KY, Spangberg L, Cha BY, Jung IY, Lee SJ, Lee CY. Shaping ability of three ProFile rotary instrumentation techniques in simulated resin root canals. J Endod 2000;26:719-723. https://doi.org/10.1097/00004770-200012000-00013
  32. Yao JH, Schwartz SA, Beeson TJ. Cyclic fatigue of three types of rotary nickel-titanium fles in a dynamic model. J Endod 2006;32:55-57.
  33. Pedulla E, Grande NM, Plotino G, Palermo F, Gambarini G, Rapisarda E. Cyclic fatigue resistance of two reciprocating nickel-titanium instruments afer immersion in sodium hypochlorite. Int Endod J 2013;46:155-159. https://doi.org/10.1111/j.1365-2591.2012.02100.x
  34. Ferreira F, Barbosa I, Scelza P, Russano D, Nef J, Montagnana M, Zaccaro Scelza M. A new method for the assessment of the surface topography of NiTi rotary instruments. Int Endod J 2017;50:902-909. https://doi.org/10.1111/iej.12707
  35. Pirani C, Paolucci A, Ruggeri O, Bossu M, Polimeni A, Gatto MR, Gandolf MG, Prati C. Wear and metallographic analysis of WaveOne and reciproc NiTi instruments before and afer three uses in root canals. Scanning 2014;36:517-525. https://doi.org/10.1002/sca.21150
  36. Topcuoglu HS, Duzgun S, Akti A, Topcuoglu G. Laboratory comparison of cyclic fatigue resistance of WaveOne Gold, Reciproc and WaveOne fles in canals with a double curvature. Int Endod J 2017;50:713-717. https://doi.org/10.1111/iej.12674
  37. Elsaka SE, Elnaghy AM, Badr AE. Torsional and bending resistance of WaveOne Gold, Reciproc and Twisted File Adaptive instruments. Int Endod J 2017;50:1077-1083. https://doi.org/10.1111/iej.12728
  38. Ozyurek T. Cyclic fatigue resistance of Reciproc, WaveOne, and WaveOne Gold nickel-titanium instruments. J Endod 2016;42:1536-1539. https://doi.org/10.1016/j.joen.2016.06.019
  39. De-Deus G, Silva EJ, Vieira VT, Belladonna FG, Elias CN, Plotino G, Grande NM. Blue thermomechanical treatment optimizes fatigue resistance and fexibility of the Reciproc fles. J Endod 2017;43:462-466. https://doi.org/10.1016/j.joen.2016.10.039
  40. Trepanier C, Tabrizian M, Yahia LH, Bilodeau L, Piron DL. Efect of modifcation of oxide layer on NiTi stent corrosion resistance. J Biomed Mater Res 1998;43:433-440. https://doi.org/10.1002/(SICI)1097-4636(199824)43:4<433::AID-JBM11>3.0.CO;2-#
  41. Wever DJ, Veldhuizen AG, de Vries J, Busscher HJ, Uges DR, van Horn JR. Electrochemical and surface characterization of a nickel-titanium alloy. Biomaterials 1998;19:761-769. https://doi.org/10.1016/S0142-9612(97)00210-X

Cited by

  1. Influence of heat treatment on torsional resistance and surface roughness of nickel‐titanium instruments vol.52, pp.11, 2019, https://doi.org/10.1111/iej.13164
  2. Surface Alterations Induced on Endodontic Instruments by Sterilization Processes, Analyzed with Atomic Force Microscopy: A Systematic Review vol.9, pp.22, 2018, https://doi.org/10.3390/app9224948
  3. A new method for assessment of nickel-titanium endodontic instrument surface roughness using field emission scanning electronic microscope vol.20, pp.1, 2018, https://doi.org/10.1186/s12903-020-01233-0