Restorative Dentistry and Endodontics

  • 제43권1호
  • /
  • Pages.7.1-7.7
  • /
  • 2018
  • /
  • 2234-7658(pISSN)
  • /
  • 2234-7666(eISSN)
대한치과보존학회 (The Korean Academy of Conservative Dentistry)
권호 표지
DOI QR코드

DOI QR Code

Comparison of bond strengths of ceramic brackets bonded to zirconia surfaces using different zirconia primers and a universal adhesive

  • Lee, Ji-Yeon (Department of Orthodontics, National Health Insurance Service Ilsan Hospital) ;
  • Ahn, Jaechan (Department of Orthodontics, National Health Insurance Service Ilsan Hospital) ;
  • An, Sang In (Department of Orthodontics, National Health Insurance Service Ilsan Hospital) ;
  • Park, Jeong-won (Department of Conservative Dentistry, College of Dentistry, Yonsei University)
  • 투고 : 2017.10.13
  • 심사 : 2017.12.05
  • 발행 : 2018.02.02
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Objectives: The aim of this study is to compare the shear bond strengths of ceramic brackets bonded to zirconia surfaces using different zirconia primers and universal adhesive. Materials and Methods: Fifty zirconia blocks ($15{\times}15{\times}10mm$, Zpex, Tosoh Corporation) were polished with 1,000 grit sand paper and air-abraded with $50{\mu}m$ $Al_2O_3$ for 10 seconds (40 psi). They were divided into 5 groups: control (CO), Metal/Zirconia primer (MZ, Ivoclar Vivadent), Z-PRIME Plus (ZP, Bisco), Zirconia Liner (ZL, Sun Medical), and Scotchbond Universal adhesive (SU, 3M ESPE). Transbond XT Primer (used for CO, MZ, ZP, and ZL) and Transbond XT Paste was used for bracket bonding (Gemini clear ceramic brackets, 3M Unitek). After 24 hours at $37^{\circ}C$ storage, specimens underwent 2,000 thermocycles, and then, shear bond strengths were measured (1 mm/min). An adhesive remnant index (ARI) score was calculated. The data were analyzed using one-way analysis of variance and the Bonferroni test (p = 0.05). Results: Surface treatment with primers resulted in increased shear bond strength. The SU group showed the highest shear bond strength followed by the ZP, ZL, MZ, and CO groups, in that order. The median ARI scores were as follows: CO = 0, MZ = 0, ZP = 0, ZL = 0, and SU = 3 (p < 0.05). Conclusions: Within this experiment, zirconia primer can increase the shear bond strength of bracket bonding. The highest shear bond strength is observed in SU group, even when no primer is used.

키워드

참고문헌

  1. Aboushelib MN, de Jager N, Kleverlaan CJ, Feilzer AJ. Efect of loading method on the fracture mechanics of two layered all-ceramic restorative systems. Dent Mater 2007;23:952-959. https://doi.org/10.1016/j.dental.2006.06.036
  2. Miyazaki T, Nakamura T, Matsumura H, Ban S, Kobayashi T. Current status of zirconia restoration. J Prosthodont Res 2013;57:236-261. https://doi.org/10.1016/j.jpor.2013.09.001
  3. Özcan M, Bernasconi M. Adhesion to zirconia used for dental restorations: a systematic review and meta- analysis. J Adhes Dent 2015;17:7-26.
  4. Atsu SS, Kilicarslan MA, Kucukesmen HC, Aka PS. Efect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin. J Prosthet Dent 2006;95:430-436. https://doi.org/10.1016/j.prosdent.2006.03.016
  5. Kato H, Matsumura H, Atsuta M. Efect of etching and sandblasting on bond strength to sintered porcelain of unflled resin. J Oral Rehabil 2000;27:103-110. https://doi.org/10.1046/j.1365-2842.2000.00489.x
  6. Wolf DM, Powers JM, O'Keefe KL. Bond strength of composite to etched and sandblasted porcelain. Am J Dent 1993;6:155-158.
  7. Baldissara P, Querze M, Monaco C, Scotti R, Fonseca RG. Efcacy of surface treatments on the bond strength of resin cements to two brands of zirconia ceramic. J Adhes Dent 2013;15:259-267.
  8. Ernst CP, Cohnen U, Stender E, Willershausen B. In vitro retentive strength of zirconium oxide ceramic crowns using diferent luting agents. J Prosthet Dent 2005;93:551-558. https://doi.org/10.1016/j.prosdent.2005.04.011
  9. Sahaf A, Peutzfeld A, Asmussen E, Gotfredsen K. Efect of surface treatment of prefabricated posts on bonding of resin cement. Oper Dent 2004;29:60-68.
  10. de Souza G, Hennig D, Aggarwal A, Tam LE. The use of MDP-based materials for bonding to zirconia. J Prosthet Dent 2014;112:895-902. https://doi.org/10.1016/j.prosdent.2014.01.016
  11. Kwak JY, Jung HK, Choi IK, Kwon TY. Orthodontic bracket bonding to glazed full-contour zirconia. Restor Dent Endod 2016;41:106-113. https://doi.org/10.5395/rde.2016.41.2.106
  12. Lee JH, Lee M, Kim KN, Hwang CJ. Resin bonding of metal brackets to glazed zirconia with a porcelain primer. Korean J Orthod 2015;45:299-307. https://doi.org/10.4041/kjod.2015.45.6.299
  13. Lee JY, Kim JS, Hwang CJ. Comparison of shear bond strength of orthodontic brackets using various zirconia primers. Korean J Orthod 2015;45:164-170. https://doi.org/10.4041/kjod.2015.45.4.164
  14. Abu Alhaija ES, Abu AlReesh IA, AlWahadni AM. Factors afecting the shear bond strength of metal and ceramic brackets bonded to diferent ceramic surfaces. Eur J Orthod 2010;32:274-280. https://doi.org/10.1093/ejo/cjp098
  15. Bishara SE, Olsen ME, Von Wald L. Evaluation of debonding characteristics of a new collapsible ceramic bracket. Am J Orthod Dentofacial Orthop 1997;112:552-559. https://doi.org/10.1016/S0889-5406(97)70083-0
  16. Reynolds IR. A review of direct orthodontic bonding. Br J Orthod 1975;2:171-178. https://doi.org/10.1080/0301228X.1975.11743666
  17. Whitlock BO 3rd, Eick JD, Ackerman RJ Jr, Glaros AG, Chappell RP. Shear strength of ceramic brackets bonded to porcelain. Am J Orthod Dentofacial Orthop 1994;106:358-364. https://doi.org/10.1016/S0889-5406(94)70056-7
  18. Blatz MB, Sadan A, Martin J, Lang B. In vitro evaluation of shear bond strengths of resin to denselysintered high-purity zirconium-oxide ceramic afer long-term storage and thermal cycling. J Prosthet Dent 2004;91:356-362. https://doi.org/10.1016/j.prosdent.2004.02.001
  19. Blatz MB, Chiche G, Holst S, Sadan A. Infuence of surface treatment and simulated aging on bond strengths of luting agents to zirconia. Quintessence Int 2007;38:745-753.
  20. Kern M, Wegner SM. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater 1998;14:64-71. https://doi.org/10.1016/S0109-5641(98)00011-6
  21. Wegner SM, Kern M. Long-term resin bond strength to zirconia ceramic. J Adhes Dent 2000;2:139-147.
  22. Chen L, Suh BI, Brown D, Chen X. Bonding of primed zirconia ceramics: evidence of chemical bonding and improved bond strengths. Am J Dent 2012;25:103-108.
  23. Magne P, Paranhos MP, Burnett LH Jr. New zirconia primer improves bond strength of resin-based cements. Dent Mater 2010;26:345-352. https://doi.org/10.1016/j.dental.2009.12.005
  24. Lorenzoni FC, Leme VP, Santos LA, de Oliveira PC, Martins LM, Bonfante G. Evaluation of chemical treatment on zirconia surface with two primer agents and an alkaline solution on bond strength. Oper Dent 2012;37:625-633. https://doi.org/10.2341/11-216-L
  25. Amaral M, Belli R, Cesar PF, Valandro LF, Petschelt A, Lohbauer U. The potential of novel primers and universal adhesives to bond to zirconia. J Dent 2014;42:90-98. https://doi.org/10.1016/j.jdent.2013.11.004

피인용 문헌

  1. Effect of Simplified Bonding on Shear Bond Strength between Ceramic Brackets and Dental Zirconia vol.12, pp.10, 2019, https://doi.org/10.3390/ma12101640
  2. Influence of Surface Treatment and Resin Cements on the Bond Strength between the Y-TZP Zirconia and Composite Resin Interface vol.21, pp.5, 2018, https://doi.org/10.17921/2447-8938.2019v21n5p477-482
  3. The Performance of Universal Adhesives on Orthodontic Bracket Bonding vol.10, pp.1, 2021, https://doi.org/10.1055/s-0041-1732778