DOI QR코드

DOI QR Code

Mechanical properties of top neck mollusks shell nano composite in different environmental conditions

  • Masir, Amin Nouroozi (Department of Mechanical Engineering, University Campus 2, University of Guilan) ;
  • Darvizeh, Abolfazl (Department of Mechanical Engineering, University of Guilan) ;
  • Zajkani, Asghar (Department of Mechanical Engineering, Imam Khomeini International University)
  • Received : 2019.03.12
  • Accepted : 2019.04.28
  • Published : 2018.09.25

Abstract

The mechanism of biological materials structure is very complex and has optimal properties compared to engineering materials. Top Neck mollusks shells, as an example of biological materials, have hierarchical structure, which 95 percent of its structure is Aragonite and 5 percent organic materials. This article detected mechanical properties of the Top Neck mollusks shell as a Nano composite using Nano-indentation method in different situations. Research findings indicate that mechanical properties of the Top Neck mollusks shell including elastic modulus and hardness are higher than a fresh one preserved in -50 centigrade and also a Top Neck mollusks shell preserved in environmental conditions. Nano-indentation test results are so close in range, overall, that hardness degree is 3900 to 5200 MPa and elastic modulus is 70 to 85 GPa.

Keywords

References

  1. Barthelat, F. (2007), "Biomimetics for next generation materials", Philosoph. Transact. Royal Soc. A: Math. Phys. Eng. Sci., 365(1861), 2907-2919. https://doi.org/10.1098/rsta.2007.0006
  2. Barthelat, F. and Espinosa, H.D. (2007), "An experimental investigation of deformation and fracture of nacre-mother of pearl", Experim. Mech., 47(3), 311-324. https://doi.org/10.1007/s11340-007-9040-1
  3. Barthelat, F. and Zhu, D. (2011), "A novel biomimetic material duplicating the structure and mechanics of natural nacre", J. Mater. Res., 26(10), 1203-1215. https://doi.org/10.1557/jmr.2011.65
  4. Barthelat, F., Li, C.M., Comi, C. and Espinosa, H.D. (2006), "Mechanical properties of nacre constituents and their impact on mechanical performance", J. Mater. Res., 21(8), 1977-1986. https://doi.org/10.1557/jmr.2006.0239
  5. Bigi, A. and Boanini, E. (2017), "Functionalized biomimetic calcium phosphates for bone tissue repair", J. Appl. Biomater. Function. Mater., 15(4), 10-25.
  6. Chokshi, H. (2018), "The mechanical behavior of nacre across length scales", J. Mech. Behavior Biomed. Mater., 2(6), 96-107.
  7. Jackson, A.P., Vincent, J.F.V. and Turner, R.M. (1988), "The mechanical design of nacre", Proc. R. Soc. B, 234, 415-440. https://doi.org/10.1098/rspb.1988.0056
  8. Kakisawa, H. and Sumitomo, T. (2011), "The toughening mechanism of nacre and structural materials inspired by nacre", Sci. Technol. Adv. Mater., 12(6), 647-791.
  9. Khater, H.M. (2016), "Nano-Silica effect on the physicomechanical properties of geopolymer composites. J. Mater. Res., 4(3), 1-14.
  10. Kobayashi, S. (1964), "Studies on shell formation. X. A study of the proteins of the extrapallial fluid in some molluscan species", Biol. Bull., 126(3), 414-422. https://doi.org/10.2307/1539310
  11. Krishna, G.R., Devarapalli, R., Prusty, R., Liu, T., Fraser, C.L., Ramamurty, U. and Reddy, C.M. (2015), "Structure-mechanical property correlations in mechanochromic luminescent crystals of boron difluoride dibenzoylmethane derivatives", IUCrJ, 2(Ml), 611-619. https://doi.org/10.1107/S2052252515015134
  12. Lee, Y., Shin, D.G., Jeong, U.S., Kim, S.R., Kwon, W.T. and Kim, Y. (2017), "Nacre-inspired composite prepared by rolling method I: Effect of particle orientation on deformation behavior", Compos. Struct., 18(2), 549-552.
  13. Li, X., Chang, W.-C., Chao, Y.J., Wang, R. and Chang, M. (2004), "Nano scale structural and mechanical characterization of a natural nanocomposite material: the shell of red abalone", Nano Lett., 4(4), 613-617. https://doi.org/10.1021/nl049962k
  14. Long, B., Wang, C.A., Lin, W., Huang, Y. and Sun, J. (2007), "Polyacrylamide-clay nacre-like nanocomposites prepared by electrophoretic deposition", Compos. Sci. Technol., 67(13), 2770-2774. https://doi.org/10.1016/j.compscitech.2007.02.007
  15. Lopes-Lima, M., Rocha, A., Goncalves, F., Andrade, J. and Machado, J. (2010), "Microstructural characterization of inner shell layers in the freshwater bivalve Anodonta cygnea", J. Shellfish Res., 29(4), 969-973. https://doi.org/10.2983/035.029.0431
  16. Luz, G.M. and Mano, J.F. (2009), "Biomimetic design of materials and biomaterials inspired by the structure of nacre", Philosophical Transactions of the Royal Society A: Math. Phys. Eng. Sci., 367(1893), 1587-1605. https://doi.org/10.1098/rsta.2009.0007
  17. Meyers, M.A., Chen, P.Y., Lin, A.Y.M. and Seki, Y. (2008), "Biological materials: Structure and mechanical properties", Progress Mater. Sci., 53(1), 1-206. https://doi.org/10.1016/j.pmatsci.2007.05.002
  18. Mohammadimehr, M., Mohammadi-Dehabadi, A.A., Akhavan Alavi, S.M., Alambeigi, K., Bamdad, M., Yazdani, R. and Hanifehlou, S. (2018), "Bending, buckling, and free vibration analyses of carbon nanotube reinforced composite beams and experimental tensile test to obtain the mechanica", Steel Compos. Struct., Int. J., 29(3), 405-422.
  19. Oliver, W.C. and Pharr, G.M. (1992), "An improved technique for determination hardness and elastic modulus using load and displacment sensing indentation exprimental", Mater. Res, 7, 1564-1583. https://doi.org/10.1557/JMR.1992.1564
  20. Padture, N. (1995), "In site processing of silicon carbide layer structures", Am. Ceram. Soc., 78(5), 3160-3162. https://doi.org/10.1111/j.1151-2916.1995.tb09104.x
  21. Parhizkar, M., Shelesh-Nezhad, K. and Rezaei, A. (2016), "Mechanical and Thermal Properties of Homo-PP/GF/$CaCO_3$ Hybrid nanocomposites", J. Mater. Res., 5(2), 121-130.
  22. Salernitano, E. and Migliaresi, C. (2003), "Composite materials for biomedical applications: a review", J. Appl. Biomater. Biomech., 1(1), 3-18
  23. Sarikaya, M., Gunnison, K.E., Yasrebi, M. and Aksay, I.A. (1990), "Mechanical property-microstructural relationships in abalone shell", MRS Online Proceedings Library Archive, 174(11), 109-116.
  24. Stokowski, J. (1951), "Essai sur le determinism des forms mineralogiques du calcaire ches les etres vivants (calcaires coquilliers)", Ann. Lnst. Oceanogr, 26, 1-113.
  25. Sumitomo, T., Kakisawa, H., Owaki, Y. and Kagawa, Y. (2007), "Structure of natural nano-laminar composites: TEM observation of nacre", In: Materials Science Forum, 561, 713-716.
  26. Tang, Z., Kotov, N.A., Magonov, S. and Ozturk, B. (2003), "Nanostructured artificial nacre", Nature Materials, 2(6), 413-418. https://doi.org/10.1038/nmat906
  27. Zaremba, C.M., Belcher, A.M., Fritz, M., Li, Y., Mann, S., Hansma, P.K., Morse, D.E., Speck, J.S. and Stucky, G.D. (1996), "Critical transitions in the biofabrication of abalone shells and flat pearls", Chem. Mater., 8(3), 120-135.