References
- J. Larminie and A. Dicks, "Fuel Cell Systems Explained", John Wiley & Sons, Ltd., UK, 2003.
- Y. Wang, K. S. Chen, J. Mishler, S. C. Cho, and X. C. Adroher, "A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research", Applied Energy, Vol. 88, 2011, pp. 981-1007. https://doi.org/10.1016/j.apenergy.2010.09.030
- H. S. Kim, D. H. Lee, K. Min, and M. Kim, "Effect of Key Operating Parameters on the Efficiency of Two Types of PEM Fuel Cell Systems", J. of Mechanical Science and Technology, Vol. 19, No. 2, 2005, pp. 1018-1026. https://doi.org/10.1007/BF02919185
- Y. Qin, Q. Du, M. Fan. Y. Chang, and Y. Yin, "Study on operating pressure effect on the performance of a proton exchange membrane fuel cell power system", Energy Conversion and Management, Vol. 142, 2017, pp. 357-365. https://doi.org/10.1016/j.enconman.2017.03.035
- D. Cho and H. S. Kim, "A Study of the Effect of Compressor Performance Map on the Efficiency of High-pressure Operating PEMFC Systems in Automotive Applications", Trans. of the Korean Hydrogen and New Energy Society, Vol. 23, No. 6, 2012, pp. 604-611. https://doi.org/10.7316/KHNES.2012.23.6.604
- J. M. Cunningham, M. A. Hoffman, and D. J. Friedman, "A Comparison of High-Pressure and Low-Pressure Operation of PEM Fuel Cell Systems", SAE Paper No. 2001-01-0538, 2001.
- A. Vasilyev, J. Andrews, L. M. Jackson, S. J. Dunnett, and B. Davies, "Component-based modelling of PEM fuel cells with bond graphs", Int. J. of Hydrogen Energy, Vol. 42. 2017, pp. 29406-29421. https://doi.org/10.1016/j.ijhydene.2017.09.004
- B. Blunier and A. Miraoui, "Proton Exchange Membrane Air Management in Automotive Applications", J. of Fuel Cell Science and Technology, Vol. 7. 2010, pp. 041007-1-041007-11. https://doi.org/10.1115/1.4000627
- M. Venturi, J. Sang, A. Knoop, and G. Hornburg, "Air Supply System for Automotive Fuel Cell Application", SAE Paper No. 2012-01-1225, 2012.
- Q. Meyer, A. Himeur, S. Ashton, O. Curnick, R. Clague, T. Reisch, P. Adcock. P. R. Shearing, and D. J. L. Brett, "System-level electro-thermal optimisation of air-cooled open-cathode polymer electrolyte fuel cells: Air blower parasitic load and schemes for dynamic operation", Int. J. of Hydrogen Energy, Vol. 40. 2015, pp. 16760-16766. https://doi.org/10.1016/j.ijhydene.2015.07.040
- D. Zhao, L. Xu, Y. Huangfu, M. Dou, and J. Liu, "Semi-physical modeling and control of a centrifugal compressor for the air feeding of a PEM fuel cell", Energy Conversion and Management, Vol. 154, 2017, pp. 380-386. https://doi.org/10.1016/j.enconman.2017.11.030
- S. W. Ji, N. S. Myung, and T. S. Kim, "Analysis of operating characteristics of a polymer electrolyte membrane fuel cell coupled with an air supply system", J. of Mechanical Science and Technology, Vol. 25, No. 4, 2011, pp. 945-955. https://doi.org/10.1007/s12206-011-0138-0
- D. K. Kim, H. E. Min, I. M. Kong, M. K. Lee, C. H. Lee, M. S. Kim, and H. H. Song, "Parametric study on interaction of blower and back pressure control valve for a 80-kW class PEM fuel cell vehicle", Int. J. of Hydrogen Energy, Vol. 41, 2016, pp. 17595-17615. https://doi.org/10.1016/j.ijhydene.2016.07.218
- J. I. Pukrushpan, "Modeling and Control of Fuel Cell Systems and Fuel Processors", Ph. D Thesis, The University of Michigan, 2003.
- Z. Abdin, C. J. Webb, and E. MacA. Gray, "PEM fuel cell model and simulation in Matlab-Simulink based on physical parameters", Energy, Vol. 116, 2016, pp. 1131-1144. https://doi.org/10.1016/j.energy.2016.10.033