DOI QR코드

DOI QR Code

Finite element model calibration of a steel railway bridge via ambient vibration test

  • Arisoy, Bengi (Department of Civil Engineering, Ege University) ;
  • Erol, Osman (Turkish Republic Railways, 3rd Regional Directorate (TCDD))
  • 투고 : 2017.05.23
  • 심사 : 2018.03.13
  • 발행 : 2018.05.10

초록

This paper presents structural assessment of a steel railway bridge for current condition using modal parameter to upgrade finite element modeling in order to gather accurate result. An adequate monitoring, such as acceleration, displacement, strain monitoring, is important tool to understand behavior and to assess structural performance of the structure under surround vibration by means of the dynamic analysis. Evaluation of conditions of an existing steel railway bridge consist of 4 decks, three of them are 14 m, one of them is 9.7 m, was performed with a numerical analysis and a series of dynamic tests. Numerical analysis was performed implementing finite element model of the bridge using SAP2000 software. Dynamic tests were performed by collecting acceleration data caused by surrounding vibrations and dynamic analysis is performed by Operational Modal Analysis (OMA) using collected acceleration data. The acceleration response of the steel bridge is assumed to be governing response quantity for structural assessment and provide valuable information about the current statute of the structure. Modal identification determined based on response of the structure play significant role for upgrading finite element model of the structure and helping structural evaluation. Numerical and experimental dynamic properties are compared and finite element model of the bridge is updated by changing of material properties to reduce the differences between the results. In this paper, an existing steel railway bridge with four spans is evaluated by finite element model improved using operational modal analysis. Structural analysis performed for the bridge both for original and calibrated models, and results are compared. It is demonstrated that differences in natural frequencies are reduced between 0.2% to 5% by calibrating finite element modeling and stiffness properties.

키워드

참고문헌

  1. Altunisik A.C. and Kalkan, K. (2016), "Investigation of earthquake angle effect on the seismic performance of steel bridges", Steel Compos. Struct., Int. J., 22(4), 855-874. https://doi.org/10.12989/scs.2016.22.4.855
  2. Altunisik, A.C., Bayraktar, A., Sevim, B. and Ates, S. (2011), "Ambient vibration based seismic evaluation of isolated Gulburnu highway bridge", Soil Dyn. Earthq. Eng., 31(11), 1496-1510. https://doi.org/10.1016/j.soildyn.2011.05.020
  3. ARTeMIS (2004), Ambient Response Testing and Modal Identification Software ARTeMIS Extractor Pro. Structural Vibration Solutions, A/S Aalborg East, Denmark. URL: http://www.svibs.com (web page on 01/02/2017)
  4. Au, F.T.K., Tham, L.G., Lee, P.K.K., Su, C., Han, D.J., Yan, Q.S. and Wong, K.Y. (2003), "Ambient vibration measurements and finite element modelling for the Hong Kong Ting Kau Bridge", Struct. Eng. Mech., Int. J., 15(1), 115-134. https://doi.org/10.12989/sem.2003.15.1.115
  5. Bayraktar, A., Altunisik, A.C., Turker, T., Karadeniz, H., Erdogdu, S. and Angin, Z. (2009), "Modal Testing, Finite-Element Model Updating, and Dynamic Analysis of an Arch Type Steel Footbridge", J. Perform. Constr. Facil., 23(2), 81-89. https://doi.org/10.1061/(ASCE)0887-3828(2009)23:2(81)
  6. Bayraktar, A., Sevim, B., Altunisik, A.C. and Turker, T. (2010), "Effect of The Model Updating on The Earthquake Behavior of Steel Storage Tanks", J. Constr. Steel Res., 66(3), 462-469. https://doi.org/10.1016/j.jcsr.2009.10.006
  7. Benedettini, F. and Gentile, C. (2011), "Operational modal testing and FE model tuning of a cable-stayed bridge", Eng. Struct., 33, 2063-2073. https://doi.org/10.1016/j.engstruct.2011.02.046
  8. Ding, Y., An, Y. and Wang, C. (2016), "Field monitoring of the train-induced hanger vibration in a high-speed railway steel arch bridge", Smart Struct. Syst., Int. J., 17(6), 1107-1127. https://doi.org/10.12989/sss.2016.17.6.1107
  9. Erol, O. (2017), "Calibration of finite element modeling of 39+646 steel railway bridge using operational modal analysis", Master Thesis; Ege University, Department of Civil Engineering, Bornova, Izmir, Turkey. [In Turkish]
  10. Ewins, D.J. (1984), Modal Testing: Theory and Practice, John Wiley & Sons, Chichester, UK.
  11. Hoag, A., Hoult, N.A., Take, W.A., Moreu, F., Le, H. and Tolikonda, V. (2017), "Measuring displacements of a railroad bridge using DIC and accelerometers", Smart Struct. Syst., Int. J., 19(2), 225-236, https://doi.org/10.12989/sss.2017.19.2.225
  12. Huang, M., Guo, W., Zhu, H. and Li, L. (2008), "Dynamic test and finite element model updating of bridge structures based on ambient vibration", Front Archit. Civil Eng. China, 2, 139-144. https://doi.org/10.1007/s11709-008-0028-4
  13. Jacobsen, N.J., Andersen, P. and Brincker, R. (2006), "Using enhanced frequency domain decomposition as a robust technique to harmonic excitation in Operational Modal Analysis", Proceedings of the ISMA2006: International Conference on Noise & Vibration Engineering, September, Heverlee, Belgium.
  14. Jaishi, B. and Ren, W.-X. (2005), "Structural finite element model updating using ambient vibration test results", J. Struct. Eng., 45, 617-628.
  15. Jaishi, B., Kim, H.J., Kim, M.K., Ren, W.X. and Lee, S.H. (2007), "Finite element model updating of concrete-filled steel tubular arch bridge under operational condition using modal flexibility", Mech. Syst. Signal Process., 21(6), 2406-2426. https://doi.org/10.1016/j.ymssp.2007.01.003
  16. Ljung, L. (1987), System Identification: Theory for the User, Prentice-Hall, Englewood Cliffs, NJ, USA.
  17. Magalhaes, F., Cunha, A. and Caetano, E. (2008), "Dynamic monitoring of a long span arch bridge", Eng. Struct., 30, 3034-3044. https://doi.org/10.1016/j.engstruct.2008.04.020
  18. Ni, Y.Q., Xia, Y., Lin, W., Chen, W.H. and Ko, J.M. (2012), "SHM benchmark for high-rise structures: a reduced-order finite element model and field measurement data", Smart Struct. Syst., Int. J., 10(4), 411-426. https://doi.org/10.12989/sss.2012.10.4_5.411
  19. Podworna, P. (2017), "Dynamic response of steel-concrete composite bridges loaded by high-speed train", Struct. Eng. Mech., Int. J., 62(2), 179-196. https://doi.org/10.12989/sem.2017.62.2.179
  20. Ribeiro, D., Calcada, R., Delgado, R., Brehm, M. and Zabel, V. (2012), "Finite element model updating of a bowstring-arch railway bridge based on experimental modal parameters", Eng. Struct., 40, 413-435. https://doi.org/10.1016/j.engstruct.2012.03.013
  21. SAP 2000 (2000), Structural Analysis Program, Computers and Structures INC. USA. USA: https://www.csiamerica.com/products/sap2000 (web page on 01/02/2017)
  22. Schlune, H., Plos, M. and Gylltoft, K. (2009), "Dynamic finite element model updating of prestressed concrete continuous boxgirder bridge", Earthq. Eng. Vib., 31, 477-485.
  23. Toydemir, B., Kocak, A., Sevim, B. and Zengin, B. (2017), "Ambient vibration testing and seismic performance of precast I beam bridges on a high-speed railway line", Steel Compos. Struct., Int. J., 23(5), 557-570. https://doi.org/10.12989/scs.2017.23.5.557
  24. Turker, T., Kartal, M.E., Bayraktar, A. and Muvafik, M. (2009), "Assessment of semi-rigid connections in steel structures by modal testing", J. Constr. Steel Res., 65(7), 1538-1547. https://doi.org/10.1016/j.jcsr.2009.03.002
  25. Ubertini, F., Gentile, C. and Materazzi, A.L. (2013), "Automated modal identification in operational conditions and its application to bridges", Eng. Struct., 46(1), 264-278. https://doi.org/10.1016/j.engstruct.2012.07.031
  26. Walia, S.K., Vinayak, H.K., Kumar, A. and Parti, R. (2015), "Modal parametric changes in a steel bridge with retrofitting", Steel Compos. Struct., Int. J., 19(2), 385-403. https://doi.org/10.12989/scs.2015.19.2.385
  27. Wilson, F. (1984), Building Materials Evaluation Handbook, Van Nostrand Reinhold Company Publishing, New York, NY, USA.
  28. Zang, L. (2013), "From Traditional Experimental Modal Analysis (EMA) to Operational Modal Analysis (OMA), an Overview", Proceedings of the 5th International Operational Modal Analysis Conference, May, Guimaraes, Portugal.