References
- B.K. Sreedhar, S.K. Albert, A.B. Pandit, Cavitation damage: Theory and measurements-A review, Wear 372 (2017) 177-196.
- F. Caupin, E. Herbert, Cavitation in water: a review, CR Phys 7 (2006) 1000-1017. https://doi.org/10.1016/j.crhy.2006.10.015
- L. van Wijngaarden, Mechanics of collapsing cavitation bubbles, Ultrason. Sonochem 29 (2016) 524-527. https://doi.org/10.1016/j.ultsonch.2015.04.006
- D. Liu, G. Wei, P. He, The effect of sealing and trivalent chromium passivating on anodized aluminum, Int. J. Electrochem. Sci 11 (2016) 2097-2105.
- Y. Zuo, P.H. Zhao, J.M. Zhao, The influences of sealing methods on corrosion behavior of anodized aluminum alloys in NaCl solutions, Surf. Coat. Technol 166 (2003) 237-242. https://doi.org/10.1016/S0257-8972(02)00779-X
- Y. Guo, G.S. Frankel, Characterization of trivalent chromium process coating on AA2024-T3, Surf. Coat. Technol 206 (2012) 3895-3902. https://doi.org/10.1016/j.surfcoat.2012.03.046
- S.Y. Kang, D.W. Lee, Study on improvement of corrosion resistance and wear resistance by anodizing and sealing treatment with nano-diamond powder on aluminum, J. Kor. Inst. Surf. Eng 47 (2014) 121-127. https://doi.org/10.5695/JKISE.2014.47.3.121
- M. Fujita, H. Tanaka, H. Muramatsu, H. Asoh, S. Ono, Corrosion resistance improvement technology of anodic oxide films on aluminum alloy that uses a lithium hydroxide solution (No. 2013-32-9049), SAE Technical Paper (2013).
- S.M. Moon, C.N. Yang, S.J. Na, Formation behavior of anodic oxide films on Al7075 alloy in sulfuric acid solution, J. Kor. Inst. Surf. Eng 47 (2014) 155-161. https://doi.org/10.5695/JKISE.2014.47.4.155
- I.C. Park, S.J. Kim, Electrochemical damage characteristics of anodized 5083 aluminum alloy with flow rate in seawater, J. Korean Inst. Surf. Eng 49 (2016) 349-356. https://doi.org/10.5695/JKISE.2016.49.4.349
- D.A. Jones, Principles and Prevention of Corrosion, 2nd Ed. Prentice Hall, Upper Saddle River (2011) 75.
- I.C. Park, S.J. Kim, Electrochemical characteristics in seawater for cold thermal spray-coated Al-Mg alloy layer, Acta Metall. Sin. (Engl. Lett.) 29 (2016) 727-734. https://doi.org/10.1007/s40195-016-0437-7
- J.A. Gonzalez, V. Lopez, E. Otero, A. Bautista, Postsealing changes in porous aluminum oxide films obtained in sulfuric acid solutions, J. Electrochem. Soc 147 (2000) 984-990. https://doi.org/10.1149/1.1393301
- H. Soyama, F. Takeo, Comparison between cavitation peening and shot peening for extending the fatigue life of a duralumin plate with a hole, J. Mater. Process. Technol 227 (2016) 80-87. https://doi.org/10.1016/j.jmatprotec.2015.08.012
- P. Diodati, G. Giannini, Cavitation damage on metallic plate surfaces oscillating at 20 kHz, Ultrason. Sonochem 8 (2001) 49-53. https://doi.org/10.1016/S1350-4177(00)00025-0
- H. Guoliang, Z. Xiaoqin, Z. Huidi, L. Jinjun, A. Yulong, C. Jianmin, and Y. Jie, Cavitation erosion of several oxy-fuel sprayed coatings tested in deionized water and artificial seawater, Wear 311 (2014) 81-92. https://doi.org/10.1016/j.wear.2013.12.026
- Y. Zhang, C. Yan, F. Wang, and W. Li, Electrochemical behavior of anodized Mg alloy AZ91D in chloride containing aqueous solution, Corros. Sci 47 (2005) 2816-2831. https://doi.org/10.1016/j.corsci.2005.01.010