DOI QR코드

DOI QR Code

Performance Comparison of Conventional and Segmental Rotor Type Switched Reluctance Motor

  • Jeong, Kwang-Il (Dept. of Mechatronics Engineering, Kyungsung University) ;
  • Xu, Zhenyao (Shenyang Institute of Automation) ;
  • Lee, Dong-Hee (Dept. of Mechatronics Engineering, Kyungsung University) ;
  • Ahn, Jin-Woo (Dept. of Mechatronics Engineering, Kyungsung University)
  • Received : 2016.06.28
  • Accepted : 2017.10.20
  • Published : 2018.05.01

Abstract

Performance comparisons of switched reluctance motor for cooling fan application are dealt in this paper. Conventional and novel segmental type motors with the same dimension are compared. The conventional 12/8 type is very popular and used widely. The structure of segmental rotor type motor is constructed from a series of discrete segments, and the stator is constructed from two types of stator poles: exciting and auxiliary poles. This type of motor has short flux path and no flux reversal in the stator. The auxiliary poles are not wound by the windings and only provide the flux return path. Compared with conventional SRM, the segmental structure increases electrical utilization of the machine and decreases core losses, which leads to higher efficiency. To verify the segmental structure, finite element method (FEM) is employed to get static and dynamic characteristics of both SRMs. Finally, the prototypes of conventional and segmental SRMs are tested for characteristics comparisons.

Keywords

References

  1. D. H. Lee, Z. G. Lee, J. Liang, J. W. Ahn, "Single-phase SRM drive with torque ripple reduction and power factor correction," IEEE Transaction on Industry Applications, vol. 43, no. 6, pp. 1578-1587, Nov.-Dec. 2007. https://doi.org/10.1109/TIA.2007.908162
  2. D. H. Lee and J. W. Ahn, "Design and analysis of hybrid stator bearingless SRM," J. Elect. Eng. Technol., vol. 6, no. 1, pp. 94-103, Jan. 2011. https://doi.org/10.5370/JEET.2011.6.1.094
  3. D. H. Lee, J. H. Pham and J. W. Ahn, "Design and operation characteristics of four-two pole high-speed SRM for torque ripple reduction," IEEE Transaction on Industrial Electronics, vol. 60, no. 9, pp. 3637-3643, Sep. 2013. https://doi.org/10.1109/TIE.2012.2208432
  4. S. M. Yang, J. Y. Chen, "Controlled dynamic braking for switched reluctance motor Drives with a rectifier front end," IEEE Transactions on Industrial Electronics, vol.60, no.11, pp. 4913-4919, 2013. https://doi.org/10.1109/TIE.2012.2233696
  5. B. Bilgin, A. Emadi, M. Krishnamurthy, "Comprehensive evaluation of the dynamic performance of a 6/10 SRM for traction application in PHEVs," IEEE Transactions on Industrial Electronics, vol. 60, no. 7, pp. 2564-2575, 2013 https://doi.org/10.1109/TIE.2012.2196015
  6. B. Bilgin, A. Emadi, M. Krishnamurthy, "Design considerations for switched reluctance machines with a higher number of rotor poles," IEEE Transactions on Industrial Electronics, vol. 59, no. 10, pp. 3745-3756, 2012 https://doi.org/10.1109/TIE.2011.2141102
  7. B.C. Mecrow, "New winding configurations for doubly salient reluctance machines," IEEE Transaction on Industry Applications, vol. 32, no. 6, pp. 1348-1356, Nov.-Dec. 1996. https://doi.org/10.1109/28.556638
  8. J. Oyama, T. Higuchi, T. Abe, and K. Tanaka, "The fundamental characteristics of novel switched reluctance motor with segment core embedded in aluminum rotor block," Journal of Electrical Engineering & Technology, vol. 1, no. 1, pp. 58-62, 2006. https://doi.org/10.5370/JEET.2006.1.1.058
  9. T. Higuchi, K. Suenaga, T. Abe, "Torque ripple reduction of novel segment type switched reluctance motor by increasing phase number", in Proceeding International Conference on Electrical Machine and Systems (ICEMS 2009), 2009.
  10. C. W. Lee, R. Krishnan, N. S. Lobo, "Novel Two-phase Switched Reluctance Machine using Common-Pole E-Core Structure: Concept, Analysis, and Experimental Verification" Industry Applications Conference, 2007. 42nd IAS Annual Meeting.