DOI QR코드

DOI QR Code

Design and Energy Performance Evaluation of Plus Energy House

플러스에너지하우스 설계 및 에너지 성능 평가

  • Kim, Min-Hwi (Korea Institute of Energy Research, Solar Thermal Convergence Laboratory) ;
  • Lim, Hee-Won (DaeJeon University, Department of Architectural Engineering) ;
  • Shin, U-Cheul (DaeJeon University, Department of Architectural Engineering) ;
  • Kim, Hyo-Jung (Department of Sustainable Engineering Team, Junglim Architecture Co., Ltd.) ;
  • Kim, Hyun-Ki (Department of Sustainable Engineering Team, Junglim Architecture Co., Ltd.) ;
  • Kim, Jong-Kyu (Korea Institute of Energy Research, Solar Thermal Convergence Laboratory)
  • 김민휘 (한국에너지기술연구원 태양열융합연구실) ;
  • 임희원 (대전대학교 건축공학과) ;
  • 신우철 (대전대학교 건축공학과) ;
  • 김효중 ((주)정림건축종합건축사사무소 정림건축기술연구소) ;
  • 김현기 ((주)정림건축종합건축사사무소 정림건축기술연구소) ;
  • 김종규 (한국에너지기술연구원 태양열융합연구실)
  • Received : 2018.02.12
  • Accepted : 2018.04.20
  • Published : 2018.04.30

Abstract

South Korea aims to shift the 20 percent of electricity supplement from the fossil fuel including the nuclear to renewable energy systems by 2030. In order to realize this agenda in the buildings, the plus energy house is necessary to increase the renewable energy supplement beyond the zero energy house. This paper suggested KePSH (KIER Energy-Plus Solar House) and energy performance of house and renewable energy systems was investigated. The KePSH has the target of generating 40% surplus energy than the conventional house energy consumption. The plus energy house is the house that generates surplus energy from the renewable energy sources than that consumes. In order to minimize the cooling and heating load of the house, the shape design and passive parameters design were conducted. Based on the experimental data of the plug load in the typical house, the total energy consumption of the house was estimated. This paper also suggested renewable energy sources integrated HVAC system using air-source heat pump system. Two cases of renewable energy system integration methods were suggested, and energy performance of the cases was investigated using TRNSYS 17 program. The results showed that the BIPV (building integrated photovoltaic) system (i.e., CASE 1) and BIPV and BIST system (i.e., CASE 2) shows 42% and 29% of plus energy rate, respectivey. Also, CASE 1 can generate 59% more surplus energy compared with the CASE 2 under the same installation area.

Keywords

References

  1. AlAjmi, A., Abou-Ziyan, H., and Ghoneim, A., Achieving annual and monthly net-zero energy of existing building in hot climate, Applied Energy, Vol. 165, No. 1, pp.511-521, 2016. https://doi.org/10.1016/j.apenergy.2015.11.073
  2. IEA SHC Task 40., Toward net zero energy solar buildings, , 2010.
  3. Lee, W. J., Baek, N. C., Lee, K. H., Heo, J. H., A study on the energy performance evaluation of zero energy house in zero energy town, Journal of the Korean Solar Energy Society, Vol. 35, No. 2, pp. 85-91, 2015. https://doi.org/10.7836/kses.2015.35.2.085
  4. Jeong, S. Y., Baek, N. C., Yoon, J. H., Shin, U. C., Kim, Y. K., Kang, S. H., The study on energy performance measurement and energy self-sufficiency analysis of KIER zero energy solar house II, Journal of The Architectural Institute of Korea Planning & Design, Vol. 27, No. 12, pp. 307-314, 2011.
  5. Song, S., Lee, S., Hur, K., and Jin. H. Cost efficiency analysis of design elements for a zero energy apartment building, Journal of the Architectural Institute of Korea, Planning and Design Section, Vol. 28, No. 8, pp. 207-216, 2012.
  6. Shin, H. C. and Jang, G. E., Analysis of energy consumption and cost based on combination of element technologies for implementing zero-energy house, Journal of KIAEBS, Vol. 9, No. 2, pp. 163-170, 2015.
  7. Lim, H. W., Yoon, J. H., and Shin, U. C., Annual energy performance evaluation of zero energy house using metering data, Journal of KIAEBS, Vol. 16, No. 3, pp. 113-119, 2016.
  8. Kazanci, O. B., Skrupskelis, M., Sevela, P., Pavlov, G. K., and Olesen, B. W., Sustainable heating, cooling and ventilation of a plus-energy house via photovoltaic/thermal panels, Energy and Buildings, Vol. 83, pp. 122-129, 2014. https://doi.org/10.1016/j.enbuild.2013.12.064
  9. Good, C., Andresen, I., and Hestnes, A. G., Solar energy for net zero energy buildings-A comparison between solar thermal, PV and photovoltaic-thermal (PV/T) systems, Solar Energy, Vol. 122, pp. 986-996, 2015. https://doi.org/10.1016/j.solener.2015.10.013
  10. US DOE, Building technologies program, planned program activities for 2008-2012, US: Department of Energy, 2008.
  11. Safa, A., Seters, T., and Fung, A., Performance assessment of a variable capacity air source heat pump and a single-capacity horizontal loop coupled ground source heat pump system, 11th IEA Heat Pump Conference, May 12-16, Montreal, Canada, 2014.
  12. Kamel, R., Ekrami, N., Dash, P., Fung, A., and Hailu, G., BIPV/T+ ASHP: Technologies for NZEBs. Energy Procedia, Vol. 78, pp. 424-429, 2015. https://doi.org/10.1016/j.egypro.2015.11.687
  13. Jonas, D., Frey, G., and Theis, D., Simulation and performance analysis of combined parallel solar thermal and ground or air source heat pump systems, Solar Energy, Vol. 150, No. 1, pp. 500-511, 2017. https://doi.org/10.1016/j.solener.2017.04.070
  14. Baek, N., Kim, S., and Shin, U., Heating and cooling performance analysis of ground source heat pump system in low energy house, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 28, No. 10, pp. 387-393, 2016. https://doi.org/10.6110/KJACR.2016.28.10.387

Cited by

  1. Energy Performance Investigation of Bi-Directional Convergence Energy Prosumers for an Energy Sharing Community vol.14, pp.17, 2018, https://doi.org/10.3390/en14175544