Figure 1. Step-by-step procedures and key contents of the study
Figure 2. Comparison of web-based and cloud computing
Figure 3. Establish requirements research direction for cloud BIM service
Figure 4. BIM inhibition factor and application effect
Figure 5. Development direction of cloud-based BIM Service
Figure 6. Development preference area of cloud-based BIM service
Figure 7.Conceptual diagram of establishing cloud-based BIM service
Figure 8. BIM server and browser architecture
Figure 9. BIM server architecture
Figure 10. Key features of BIM server manager and browser screen
Figure 11. Common base PssS - SaaS - IaaS structure design
Figure 12. Database design monitor & batch (common) part
Table 1. BIM applied technology field
Table 2. Technical department of cloud computing
Table 3. Definition of cloud-based BIM marketability non-functional requirements
Table 4. Key features of BIM server-based browser
Table 5. Port BIM browser functionality requirements
Table 6. Test items of prototype system to be developed
참고문헌
- Bae, J. S., Cho, Y. S. (2008). A study on the embodiment of prototype for one-way slab design based on the objectARX applying the concept of BIM. Journal of The Architectural Institute of Korea (Structure & Construction Section), Architectural Institute of Korea, 24(8), pp. 41-48 (in Korean).
- BuildingSMART (2008). Challenges on BIM and common countermeasures in architectural design. BuildingSMART Forum 2008.
- Chae, K. H., Lee, G. (2011). A study on the problems and the measurements for improving representations and drafting methods of architectural drawings by Adopting BIM. Journal of The Architectural Institute of Korea (Planning & Design Section) , Architectural Institute of Korea, 27(10), pp. 67-74 (in Korean).
- Goh, I. D., Choi, J. H., Kim, E. D., Jeong, Y. S., Lee, J . M. (2008). Extracting building geometry from BIM for 3-D city mode. Journal of GIS Association of Korea, The Korean Association of Geographic Information Studies, 16(2), pp. 49-57 (in Korean).
- Ham, N. H., Moon, H., Lee, Y. S.,Kim, J. H., Lee, S. J., Kim, J. J. (2008). A study on application of BIM(Building Information Modeling) to pre-design in construction project. Journal of The Architectural Institute of Korea (Planning & Design Section), Architectural Institute of Korea, 24(7), pp. 39-46 (in Korean).
- Han, J. Y., Cha, H. S., Lee, D. G. (2008). A measure for standardization of old aged apartment remodeling through application of BIM. Korea Journal of Construction Engineering and Management, Korea Institute of Construction Engineering and Management, 9(1), pp. 66-76 (in Korean).
- Han, S. B. (2011). Feasibility study on strategic planning to build a cloud computing environment for smart education, 2011 KERIS Issue Report RM 2이 M9, Korea Education and Research Information Service, 3(2), pp. 33-43 (in Korean).
- Haymaker, J., Fischer, M. (2001). Challenges and Benefits of 4D Modeling on the Walt Disney Concert Hall Project, CIFE, Stanford University, Working Paper, pp. 53-63.
- Jeon, S. H., Yun, S. H., Paek, J. H. (2007). A study on analysis of the correlation between building information modeling and project management information system. Proc. of Conference in Architectural Institute of Korea, Architectural Institute of Korea, pp. 757-760 (in Korean).
- Jo, J., Park, J. H.,Park, W. H., Yun, S. H., Paek, J. H. (2008). A study on the BIM based architectural construction simulation system using combinative construction schedule creation method. Journal of The Architectural Institute of Korea (Structure & Construction Section), Architectural Institute of Korea, 24(7), pp. 101-108 (in Korean).
- Kang, J. H. Anderson, S. D., Clayton, M. J. (2007). Empirical study on the merit of web-based 4D visualization in collaborative construction planning and scheduling. Journal of Construction Engineering & Management, ASCE, 133(6), pp. 447-461. https://doi.org/10.1061/(ASCE)0733-9364(2007)133:6(447)
- Kang, L., Moon, H. S., Ji, S. B., Lee, T. S. (2008). Development of major functions of visualization system for construction schedule data in plant project. Korea Journal of Construction Engineering and Management, 9(1), pp. 66-76 (in Korean).
- Kim, H. E., Kano, N. (2006). Visualization of process and inference of assemble sequence using 3-dimensional CAD data. Journal of The Architectural Institute of Korea (Structure & Construction Section), Architectural Institute of Korea, 22(5), pp. 179-186 (in Korean).
- Kim, K. H.,Kim, E. J., Kim, J. J. (2009). A study to judge the importance of indices to estimate architectural competition on the apartment for using BIM. Journal of The Architectural Institute of Korea (Planning & Design Section), Architectural Institute of Korea, 25(2), pp. 59-66 (in Korean).
- Kim, S. A., Yang, B. H.,Chin, S., Yoon, S. W. (2012). A study on a development and current state of BIM in Korean focuse on hype-cycle. Proc. of KIBIM Annual Conference 2012, Korea Institute of Building Information Modeling, 2(1), pp. 73-74 (in Korean).
- Kumar, B., Cheng, J., Mcgibbney, L. (2010). Cloud computing and its implications for construction it. Proc. of the International Conference, Computing in Civil and Building Engineering, pp. 315-320, Nottingham University Press.
- Kwon, O. C., Jo, C. W. (2008). A study on the improvement of 2D digital drawing standards considering the paradigm shift to BIM. Journal of The Architectural Institute of Korea (Planning & Design Section ), Architectural Institute of Korea, 24(5), pp. 49-57 (in Korean).
- Lee, C. J., Lee, G., Won, J. S. (2009a). An analysis of the BIM software selection factor. Journal of The Architectural Institute of Korea (Structure & Construction Section), Architectural Institute of Korea, 25(7), pp. 153-164 (in Korean).
- Lee, J. H., Eom, S. J. (2011). Computing technology for mobile BIM based project management information system. Proc. of The Korea Institute of Building Construction, 2011 Spring conference, The Korea Institute of Building Construction, 11(1), pp. 145-148 (in Korean).
- Lee, J. S.,Moon, S. K., Kim, J. H., Kim, J. J. (2009b). An analysis about factors affecting inactiveness of BIM (Building Information Modeling) introduction in the construction project. Proc. of KICEM Annual Conference 2009, Korea Institute of Construction Engineering and Management, pp. 757-762 (in Korean).
- Lee, S. H. Ahn, B. J., Kim, J. H.,Kim, K. H., Lee, Y. S., Kim, J. J. (2007). An analysis on affecting factors about lowly using 3D CAD by using the AHP. Korea Journal of Construction Engineering and Management, Korea Institute of Construction Engineering and Management, 8(6), pp. 188-196 (in Korean).
- Lim, J. T., Kim, N. U. (2006). A Study on the design process by prototype method. Journal of The Architectural Institute of Korea (Planning & Design Section), Architectural Institute of Korea, 22(4), pp. 127-134 (in Korean).
- Park, J. D., Kim, J. W. (2009). A study on the ontology representation of the IFC based building information model. Journal of The Architectural Institute of Korea (Structure & Construction Section), Architectural Institute of Korea, 25(5), pp. 87-94 (in Korean).
- Park, J. W., Kim, S. C.,Lee, S. S., Song, H. Y. (2009). Suggesting solutions when applying building information modeling (BIM) to the Korean construction industry through case studies. Journal of The Korea Institute of Building Construction, The Korea Institute of Building Construction 9(4), pp. 93-102 (in Korean). https://doi.org/10.5345/JKIC.2009.9.4.093
- Redmond, A., Smith, B. (2011). Exchanging partial BIM information through a cloud-based service: Testing the Efficacy of a Major Innovation. Proc. of the IBEA Conference 2011, London South Bank University, 31(4), pp. 22-29.
- Song, J. K., Ju, K. B. (2011). Applying the cloud computing technology for utilizing mobile device of BIM-based maintenance systems. Proc. of KICEM Annual Conference 2011, Korea Institute of Construction Engineering and Management, pp. 311-312 (in Korean).
- Song, M. L., Yoon, S. W., Chin, S. (2011). BSC based measurement of satisfaction degree for based BIM construction projects. Korea Journal of Construction Engineering and Management, Korea Institute of Construction Engineering and Management, 12(4), pp. 117-129 (in Korean). https://doi.org/10.6106/KJCEM.2011.12.4.117
- Won, J. (2009). Key success factors for adopting BIM (building information modeling) in A/E/C projects, Master Thesis, Yonsei University (in Korean).
- Yoo, S. H.,Song, J. H., Oh, K. S. (2006). Infrastructure of web-based system for collaborative design. Journal of The Architectural Institute of Korea (Planning & Design Section), Architectural Institute of Korea, 22(2), pp. 67-74 (in Korean).
- Yoon, S. W., Kim, B. K., Choi, J. M., Kwon, S.W. (2013). Aprototype BIM Server Based viewer for Cloud Computing BIM Services, Journal of the Korean Society of Civil Engineers, 33(4) : 1719-1730. https://doi.org/10.12652/Ksce.2013.33.4.1719
- Youn, Y. J., Kim, D, H. (2008). A study on the organizational change in architectural design firm by introducing BIM. Journal of The Architectural Institute of Korea (Planning & Design Section), Architectural Institute of Korea, 24(6), pp. 11-18 (in Korean).
- Yun, S. H.,Park, C. W.,Lee, G., Kim, B. K. (2008). A study on a method for tracking lifting paths of a tower crane using GPS in the BIM environment. Journal of The Architectural Institute of Korea (Structure & Construction Section), rchitectural Institute of Korea, 24(6), pp. 163-170 (in Korean).