Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Composite Insulation Boom Development of the Aerial Work Platform for Electric Work

전선작업용 고소작업차의 복합재 절연붐 개발

  • Received : 2018.03.06
  • Accepted : 2018.04.05
  • Published : 2018.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

This study describes the 3D design and analysis of a composite insulation boom of an aerial work platform for electric work. Structural analysis of the composite insulation boom was performed using ANSYS and the total deformation, equivalent stress, and normal elasticity were investigated at 150 mm, 500 mm, 1,000 mm, and 1,500 mm using a mounted strain gauge. The results of the analysis and test were similar in a linearly increasing slope and the difference in the strain value was about 10%. This difference depends on the compressive force in the manufacturing process.

Keywords

References

  1. Jia, Y. A., Qiu, X., Zhou, Z., Fu, Y., Xing, F., Zhao, E., "Buckling failure analysis of all-terrain crane telescopic boom section", Engineering Failure Analysis Vol. 57 pp. 105-117, 2015 https://doi.org/10.1016/j.engfailanal.2015.07.038
  2. Hiroki, F., Hiroyuki, S., "Development of flexible telescopic boom model using absolute nodal coordinate formulation sliding joint constraints with LuGre friction", THEORETICAL & APPLIED MECHANICS LETTERS 2, 2012
  3. Kim, J. S., Kuk, H. H.,"A Study on Durability of Refracted Telescopic Boom in 30m Class with the Property of Working Range Insulation", J. Korean Soc. Mech. Technol, 19(3) pp. 372-378, 2017 https://doi.org/10.17958/ksmt.19.3.201706.372
  4. Kim, K. E., Chang, B. C., Kim, Y. K., No, Y. S., So, S. H., "A Study of the Design on Multi-joint Demolition Water Vehicle with ADAMS/ANSYS", Journal of the Korean Society of Mechanical Technology, Vol. 16, No.3, pp. 1435-1439, 2014 https://doi.org/10.17958/ksmt.16.3.201406.1435
  5. Jeong, S. H., "Development of a Vehicle Loading Lift for Various Aerial Works", Journal of the Korean Society of Mechanical Technology, Vol. 12, No. 3, pp. 141-146, 2010. https://doi.org/10.17958/ksmt.12.3.201009.141
  6. Hong, D. P., "Stress analysis for 46kV insulated boom design of 20m-class high place operation car", Pro. of the KSNVE, pp. 528-529, 2012.
  7. Yi, C. S., Chin, D. P "Numerical Analysis of the Development of an Air Conditioning Duct for Marine and Oil Drilling Ships", Journal of the Korean Society of Manufacturing Process Engineers, pp.50-55, 2017.
  8. Choi, D. H., Lee, K. H., "Structural Analysis and Optimization of a Pedestal for Deck Crane" Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1, pp. 95-100, 2012

Cited by

  1. Numerical Analysis of Deck Frame for Lightweight Trucks vol.17, pp.3, 2018, https://doi.org/10.14775/ksmpe.2018.17.3.127